Intermediate and low radiofrequency electromagnetic field transmission properties in case of common building materials

Controlling exposure to the electromagnetic fields (EMFs) may serve many causes: to protect sensitive electronic equipment from outside interference; to protect the environment from the high radiation generating equipment; to protect humans from excess radiation etc. Strong EMFs may be encountered in public domain but especially in occupational settings, where the process and technology of work requires the EMFs. Technical measures to manage risks may include using construction materials. In this study the intermediate and low radiofrequency transmission characteristics in case of building materials were investigated. The measurements are called for to determine the amplitude of the electric and magnetic field at the close proximity to the material. A set of common building materials was selected, widely used in modern constructions. The included materials can broadly be divided into three groups: load bearing materials, thermal insulation materials and cover materials. Altogether 17 building materials were tested, forming an overview of some most common materials in construction of houses. The testing was done at 2, 20 and 200 kHz frequencies. The measurement point was in close proximity (10mm) to the material under testing. The electromagnetic irradiator point was on the other side of the material, 150 mm from the measurement sensor. Somewhat frequency dependent variation in the amplification could be observed only in few cases: gypsum panel, aerated concrete, LECA, gypsum board and solid wood. The highest electric field amplification was measured for some materials, up to 5.6 dB increase: custom made gypsum panel, aerated concrete, LECA, gypsum board, high performance concrete plate, solid wood. The results show for the selected samples that semiconductive materials which cannot be grounded due to the high resistance, electric fields may be amplified several folds in close proximity to the material.

[1]  Yuping Duan,et al.  Cement based electromagnetic shielding and absorbing building materials , 2006 .

[2]  A. Neville,et al.  High performance concrete—An overview , 1998 .

[3]  K R Foster,et al.  Health and safety implications of exposure to electromagnetic fields in the frequency range 300 Hz to 10 MHz , 2002, Bioelectromagnetics.

[4]  J. Boyle.  Wireless technologies and patient safety in hospitals. , 2006, Telemedicine journal and e-health : the official journal of the American Telemedicine Association.

[5]  Giulio Antonini,et al.  Shielding effects of reinforced concrete structures to electromagnetic fields due to GSM and UMTS systems , 2003 .

[6]  Jack Blitz,et al.  Electrical and Magnetic Methods of Nondestructive Testing , 2020 .

[7]  Jolanta Karpowicz,et al.  Exposure of Workers to Electromagnetic Fields. A Review of Open Questions on Exposure Assessment Techniques , 2009, International journal of occupational safety and ergonomics : JOSE.

[8]  E. Mantiply,et al.  Summary of measured radiofrequency electric and magnetic fields (10 kHz to 30 GHz) in the general and work environment. , 1997, Bioelectromagnetics.

[9]  I. Kolcunová,et al.  Measuring of the shielding effectiveness of electromagnetic field of brick wall in the frequency range from 1 GHz to 9 GHz , 2014, Proceedings of the 2014 15th International Scientific Conference on Electric Power Engineering (EPE).

[10]  P. Van Damme,et al.  Chronic hepatitis and other liver disease , 2009 .

[11]  Birgitta Floderus,et al.  Occupational exposures to high frequency electromagnetic fields in the intermediate range ( >300 Hz-10 MHz). , 2002, Bioelectromagnetics.

[12]  M. Gulliford,et al.  Oxford Textbook of Global Public Health , 2015 .

[13]  S. G. Allen.  Review of occupational exposure to optical radiation and electric and magnetic fields with regard to the proposed CEC physical agents directive , 1994 .

[14]  Kjell Hansson Mild,et al.  Guidance Note: Risk Management of Workers With Medical Electronic Devices and Metallic Implants in Electromagnetic Fields , 2008, International journal of occupational safety and ergonomics : JOSE.

[15]  Yong-Seung Chi,et al.  Electromagnetic Shielding Effectiveness of Multifunctional Metal Composite Fabrics , 2008 .

[16]  Haeng-Ki Lee,et al.  Synergistic effect of MWNT/fly ash incorporation on the EMI shielding/absorbing characteristics of cementitious materials , 2016 .

[17]  Jian Wang,et al.  Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application , 2015 .