Influence of tooth geometrical shape on the leakage and rotordynamic characteristics of labyrinth seals in a cryogenic liquid turbine expander

[1]  Haisheng Chen,et al.  Preliminary Design and Performance Analysis of the Liquid Turbine for Supercritical Compressed Air Energy Storage Systems , 2021, Applied Thermal Engineering.

[2]  Jun Li,et al.  Leakage and Rotordynamic Characteristics for Three Types of Annular Gas Seals Operating in Supercritical CO2 Turbomachinery , 2021 .

[3]  Jun Li,et al.  Numerical Comparison of Leakage Flow and Rotordynamic Characteristics for Two Types of Labyrinth Seals With Baffles , 2020 .

[4]  Jun Li,et al.  Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions , 2020 .

[5]  Jun Li,et al.  Effects of tooth bending damage on the leakage performance and rotordynamic coefficients of labyrinth seals , 2020 .

[6]  Jinju Sun,et al.  Enhancing refrigeration capacity of turbo expander by means of multipoint design optimization , 2019 .

[7]  Z. Xing,et al.  Optimization on shaft seals for a twin-screw steam compressor based on a novel uniform property region (UPR) model on discharge end-face , 2018, International Journal of Refrigeration.

[8]  Zuchao Zhu,et al.  Numerical simulation of cryogenic cavitating flow by an extended transport-based cavitation model with thermal effects , 2018, Cryogenics.

[9]  Jun Li,et al.  Numerical comparisons of rotordynamic characteristics for three types of labyrinth gas seals with inlet preswirl , 2016 .

[10]  A. S. Sekhar,et al.  Rotordynamic characteristics of rotating labyrinth gas turbine seal with centrifugal growth , 2016 .

[11]  Ke Wang,et al.  Experimental study of cryogenic liquid turbine expander with closed-loop liquefied nitrogen system , 2015 .

[12]  Mohana Rao Ramanadham,et al.  Development of Cavity Shapes of Labyrinth Seals Through CFD Analysis , 2013 .

[13]  Jun Li,et al.  Multiple Frequencies Elliptical Whirling Orbit Model and Transient RANS Solution Approach to Rotordynamic Coefficients of Annual Gas Seals Prediction , 2013 .

[14]  A. Ficarella,et al.  Influence of convective heat transfer modeling on the estimation of thermal effects in cryogenic cavitating flows , 2012 .

[15]  Reinhard Radermacher,et al.  Performance enhancement of propane pre-cooled mixed refrigerant LNG plant , 2012 .

[16]  R. Gao,et al.  Influence of Preswirl on Rotordynamic Characteristics of Labyrinth Seals , 2012 .

[17]  Guang Xi,et al.  Numerical Investigation on the Labyrinth Seal Design for a Low Flow Coefficient Centrifugal Compressor , 2010 .

[18]  P. Nekså,et al.  Large-scale hydrogen liquefier utilising mixed-refrigerant pre-cooling , 2010 .

[19]  J. Jeffrey Moore,et al.  Three-Dimensional CFD Rotordynamic Analysis of Gas Labyrinth Seals , 2003 .

[20]  P. Spalart,et al.  On the sensitization of turbulence models to rotation and curvature , 1997 .

[21]  J. K. Scharrer,et al.  Theory Versus Experiment for the Rotordynamic Coefficients of Labyrinth Gas Seals: Part I—A Two Control Volume Model , 1988 .

[22]  Dara W. Childs,et al.  Experimental rotordynamic coefficient results for teeth-on-rotor and teeth-on-stator labyrinth gas seals , 1986 .

[23]  R. J. Jenny,et al.  Prediction of Stiffness and Damping Coefficients for Centrifugal Compressor Labyrinth Seals , 1984 .

[24]  Yan Liu,et al.  Numerical Analysis of Labyrinth Seal Performance for the Impeller Backface Cavity of a Supercritical CO2 Radial Inflow Turbine , 2021 .

[25]  T. Iwatsubo,et al.  Consideration of Whirl Frequency Ratio and Effective Damping Coefficient of Seal , 2010 .

[26]  Gerald L. Morrison,et al.  Analysis of Flow Parameters Influencing Carry-Over Coefficient of Labyrinth Seals , 2009 .

[27]  U. Ghia,et al.  Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD Applications , 2007 .

[28]  T. Iwatsubo,et al.  Evaluation of instability forces of labyrinth seals in turbines or compressors , 1980 .