Transduction magnitude and phase for COM modeling of SAW devices

An analytic formulation for transduction parameter required by the coupling-of-modes analysis of surface acoustic wave (SAW) transducers is derived by comparing solutions obtained using the coupling-of-modes analysis and an equivalent quasi-static analysis using the Green function method. This analysis results in the derivation of a convenient representation for the transduction strength of periodic SAW transducers. Using the formulation, analytic solutions are obtained for the transduction magnitude and phase of regular SAW transducers. Nonregular transducers are also modeled with the help of an electrostatic field analysis of the transducer's structure.<<ETX>>

[1]  W. J. Ghijsen,et al.  The Computation of the Electric Field Quantities in SAW Devices , 1984 .

[2]  C. S. Hartmann,et al.  Overview of design challenges for single phase unidirectional SAW filters , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[3]  Kazuhiko Yamanouchi,et al.  Theoretical analysis of relations between directivity of SAW transducer and its dispersion curves , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[4]  Robert Weigel,et al.  Efficient design tool for SAW-resonator filters , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[5]  S. Jen,et al.  An improved model for chirped slanted SAW devices , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[6]  D. P. Morgan,et al.  Quasi-Static Analysis of Generalized SAW Transducers Using the Green's Function Method , 1980, IEEE Transactions on Sonics and Ultrasonics.

[7]  P. V. Wright,et al.  Analysis and design of low-loss SAW devices with internal reflections using coupling-of-modes theory , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[8]  E. Akçakaya,et al.  A New Analysis of Single-Phase Unidirectional Transducers , 1987, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  H. M. Gerard,et al.  Analysis of Interdigital Surface Wave Transducers by Use of an Equivalent Circuit Model , 1969 .

[10]  P. Wright.  Low-cost high-performance resonator and coupled-resonator design: NSPUDT and other innovative structures , 1989, Proceedings of the 43rd Annual Symposium on Frequency Control.

[11]  R.C. Peach.  A General Approach to the Electrostatic Problem of the SAW Interdigital Transducer , 1981, IEEE Transactions on Sonics and Ultrasonics.

[12]  C. S. Hartmann,et al.  End Effects in Interdigital Surface Wave Transducers , 1972 .

[13]  Donald C. Malocha,et al.  A coupling-of-modes analysis of chirped transducers containing reflective electrode geometries , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[14]  S. Datta,et al.  Element Factor for Periodic Transducers , 1980, IEEE Transactions on Sonics and Ultrasonics.

[15]  Toshikazu Kodama,et al.  Design of Low-Loss SAW Filters Employing Distributed Acoustic Reflection Transducers , 1986, IEEE 1986 Ultrasonics Symposium.

[16]  C. Hartmann,et al.  An improved propagation model for chirped slanted SAW devices , 1988, IEEE 1988 Ultrasonics Symposium Proceedings..

[17]  C. S. Hartmann,et al.  A generalized impulse response model for SAW transducers including effects of electrode reflections , 1988, IEEE 1988 Ultrasonics Symposium Proceedings..

[18]  P. V. Wright,et al.  The Natural Single-Phase Unidirectional Transducer: A New Low-Loss SAW Transducer , 1985, IEEE 1985 Ultrasonics Symposium.

[19]  M. B. King,et al.  A Novel Group-Type SPUDT , 1987, IEEE 1987 Ultrasonics Symposium.

[20]  B. J. Hunsinger,et al.  A Generalized Model for Periodic Transducers with Arbitrary Voltages , 1978 .

[21]  T. Thorvaldsson,et al.  Analysis of the natural single phase unidirectional SAW transducer , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[22]  Brent Horine,et al.  Practical implementation of coupling-of-modes theory for SAW device modeling , 1989, Proceedings., IEEE Ultrasonics Symposium,.

[23]  G. Tobolka,et al.  Mixed Matrix Representation of SAW Transducers , 1979, IEEE Transactions on Sonics and Ultrasonics.

[24]  P. V. Wright,et al.  A new generalized modeling of SAW transducers and gratings , 1989, Proceedings of the 43rd Annual Symposium on Frequency Control.

[25]  M. Redwood,et al.  Analysis of Generation and Detection of Surface and Bulk Acoustic Waves by Interdigital Transducers , 1977, IEEE Transactions on Sonics and Ultrasonics.

[26]  R. J. Kansy,et al.  An Analysis of SAW Interdigital Transducers with Internal Reflections and the Application to the Design of Single-Phase Unidirectional Transducers , 1982 .

[27]  H. Haus,et al.  Analysis of Metal-Strip SAW Gratings and Transducers , 1985, IEEE Transactions on Sonics and Ultrasonics.