论文信息 - Emissions Reduction During Warm-Up Period by Incorporating a Wall-Wetting Fuel Model on the Fuel Injection Strategy During Engine Starting - 字舞流文

Emissions Reduction During Warm-Up Period by Incorporating a Wall-Wetting Fuel Model on the Fuel Injection Strategy During Engine Starting

Shusuke Akazaki | Kaoru Horie | Hitoshi Takahasi | S. Akazaki | Kaoru Horie | Hitoshi Takahasi

[1] Paul J. Shayler,et al. Fuel Transport Characteristics of Spark Ignition Engines for Transient Fuel Compensation , 1995 .

[2] David F. Thompson,et al. Electrically heated extruded metal converters for low emission vehicles , 1992 .

[3] Teruji Sekozawa,et al. Development of a Highly Accurate Air-Fuel Ratio Control Method Based on Internal State Estimation , 1992 .

[4] M. J. Anderson. A Feedback A/F Control System for Low Emission Vehicles , 1993 .

[5] Gang Chen,et al. The Behavior of Multiphase Fuel-Flow in the Intake Port , 1994 .

[6] I. C. Finlay,et al. Fast Response FID Measurement of Unburned Hydrocarbons in the Exhaust Port of a Firing Gasoline Engine , 1990 .

[7] C. F. Aquino. Transient A/F Control Characteristics of the 5 Liter Central Fuel Injection Engine , 1981 .

[8] John B. Heywood,et al. Mixture Preparation in a SI Engine with Port Fuel Injection During Starting and Warm-Up , 1992 .

[9] W. A. Woods,et al. Measurements of Unburnt Hydrocarbons in a Spark Ignition Combustion Engine during the Warm-Up Period , 1992 .

[10] Charles F. Aquino,et al. Transient A/F characteristics for cold operation of a 1.6 liter engine with sequential fuel injection , 1988 .

[11] Nick Collings,et al. Cyclically resolved HC emissions from a spark ignition engine , 1987 .