Facile fabrication of true three-dimensional microcoils inside fused silica by a femtosecond laser

This paper presents a facile method for the fabrication of on-chip three-dimensional (3D) microcoils inside fused silica. The main fabrication process involves two steps: (1) creating 3D helical microchannels inside fused silica using an improved femtosecond laser irradiation assisted by chemical etching (FLICE) technology and (2) conductive treatment by injecting metal gallium into the helical microchannels. The high aspect ratio 3D helical microcoil was prepared inside fused silica with a diameter of 100 μm, a length of 880 μm and a pitch of coil of 44 μm. The method is flexible to fabricate microcoils inside fused silica with arbitrary geometry configurations and different coil properties. This type of microcoils can be easily integrated into ‘lab on a chip’ (LOC) platform inside fused silica substrate. (Some figures may appear in colour only in the online journal)

[1]  Hai-Feng Ji,et al.  Fabrication of microcoil/microsprings for novel chemical and biological sensing , 2007 .

[2]  Carl A. Michal,et al.  Sub-nanoliter nuclear magnetic resonance coils fabricated with multilayer soft lithography , 2009 .

[3]  Koji Sugioka,et al.  Tuning etch selectivity of fused silica irradiated by femtosecond laser pulses by controlling polarization of the writing pulses , 2011 .

[4]  J. Si,et al.  Fabrication of three-dimensional microchannels inside silicon using a femtosecond laser , 2009 .

[5]  George M. Whitesides,et al.  Microsolidics: Fabrication of Three‐Dimensional Metallic Microstructures in Poly(dimethylsiloxane) , 2007 .

[6]  Roberto Osellame,et al.  Integration of optical waveguides and microfluidic channels fabricated by femtosecond laser irradiation , 2007 .

[7]  I. Shimoyama,et al.  A micro planar coil for local high resolution magnetic resonance imaging , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[8]  Richard F. Godley,et al.  A magnetic resonance (MR) microscopy system using a microfluidically cryo-cooled planar coil. , 2011, Lab on a chip.

[9]  L. Ciobanu,et al.  Design and testing of high sensitivity microreceiver coil apparatus for nuclear magnetic resonance and imaging , 2001 .

[10]  P.-A. Besse,et al.  High-Q factor RF planar microcoils for micro-scale NMR spectroscopy , 2002 .

[11]  Jürgen Hennig,et al.  On-chip three dimensional microcoils for MRI at the microscale. , 2010, Lab on a chip.

[12]  P. Laporta,et al.  Fabrication of long microchannels with circular cross section using astigmatically shaped femtosecond laser pulses and chemical etching , 2006 .

[13]  Jin-Woo Choi,et al.  An on-chip magnetic bead separator for biocell sorting , 2006 .

[14]  I. Shimoyama,et al.  A Standing Micro Coil for a High Resolution MRI , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[15]  Rita E Serda,et al.  1H NMR Detection of superparamagnetic nanoparticles at 1T using a microcoil and novel tuning circuit. , 2006, Journal of magnetic resonance.

[16]  M. Allen,et al.  A planar micromachined spiral inductor for integrated magnetic microactuator applications , 1993 .

[17]  M. Esashi,et al.  Process for the fabrication of hollow core solenoidal microcoils in borosilicate glass , 2008 .

[18]  K. Seemann,et al.  A new generation of CMOS-compatible high frequency micro-inductors with ferromagnetic cores: Theory, fabrication and characterisation , 2006 .

[19]  J. Nishii,et al.  Three-dimensional hole drilling of silica glass from the rear surface with femtosecond laser pulses. , 2001, Optics letters.

[20]  Jan G. Korvink,et al.  A fully MEMS-compatible process for 3D high aspect ratio micro coils obtained with an automatic wire bonder , 2009 .

[21]  B. Löchel,et al.  Microcoils fabricated by UV depth lithography and galvanoplating , 1996 .

[22]  Yukio Hishikawa,et al.  Effect of compressive and tensile strains on the electrical resistivity of carbon microcoil/silicone-rubber composites , 2007 .

[23]  R. Osellame,et al.  Shape control of microchannels fabricated in fused silica by femtosecond laser irradiation and chemical etching. , 2009, Optics express.

[24]  R. Osellame,et al.  Femtosecond laser microstructuring: an enabling tool for optofluidic lab‐on‐chips , 2011 .

[25]  M. Esashi,et al.  Development of high-resolution intraluminal and intravascular MRI probe using microfabrication on cylindrical substrates , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[26]  Nam-Trung Nguyen,et al.  Adhesive-based liquid metal radio-frequency microcoil for magnetic resonance relaxometry measurement. , 2012, Lab on a chip.

[27]  F. He,et al.  Direct fabrication of homogeneous microfluidic channels embedded in fused silica using a femtosecond laser. , 2010, Optics letters.