Achieving biocompatible stiffness in NiTi through additive manufacturing

This article seeks to reduce the stiffness of NiTi parts from a nonporous state to that of human bone by introducing porosity. Compact bone stiffness is between 12 and 20 GPa while the currently used bone implant materials are several times stiffer. While very stiff implants and/or fixation hardware can temporarily immobilize healing bone, it also causes stress shielding of the surrounding bone and commonly results in stress concentrations at the implant or immobilization hardware’s fixation site(s). Together these processes can lead to implant or fixation hardware and/or the surrounding bone’s failure. Porous NiTi can be used to reduce the stiffness of metallic implants while also providing necessary stabilization or immobilization of the patient’s reconstructed anatomy. In this work, mechanical behavior of porous NiTi with different levels of porosity is simulated to show the relation between the stiffness and porosity level. Then porous structures are fabricated through additive manufacturing to validate the simulation results. The results indicate that stiffness can be reduced from the bulk value of 69 GPa to as low as 20.5 GPa for 58% porosity. The simulation shows that it is possible to achieve a wide range of desired stiffness by adjusting the level of porosity.

[1]  Bert Müller,et al.  Determination of strain fields in porous shape memory alloys using micro-computed tomography , 2010, Optical Engineering + Applications.

[2]  M. Bram,et al.  Mechanical Properties of Highly Porous NiTi Alloys , 2011, Journal of Materials Engineering and Performance.

[3]  C. Engh,et al.  Producing and avoiding stress shielding. Laboratory and clinical observations of noncemented total hip arthroplasty. , 1992, Clinical orthopaedics and related research.

[4]  Akira Kawasaki,et al.  Compression behavior of porous NiTi shape memory alloy , 2005 .

[5]  C. L. Chu,et al.  Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis , 2004 .

[6]  J. Galante,et al.  The Bone-Implant Interface of Femoral Stems with Non-Circumferential Porous Coating. A Study of Specimens Retrieved at Autopsy* , 1996, The Journal of bone and joint surgery. American volume.

[7]  David C. Dunand,et al.  Shape-memory NiTi foams produced by solid-state replication with NaF , 2007 .

[8]  Y. Chen,et al.  Synthesis of NiTi by Low Electrothermal Loss Spark Plasma Sintering , 2007 .

[9]  Michael J. Miller,et al.  Modeling and validation of additively manufactured porous nitinol implants , 2014 .

[10]  Jason M. Walker,et al.  Additive manufacturing towards the realization of porous and stiffness-tailored NiTi implants , 2014 .

[11]  Hu Guoxin,et al.  Fabrication of high porous NiTi shape memory alloy by metal injection molding , 2008 .

[12]  L. Rong,et al.  Stress–strain behavior of porous Ni–Ti shape memory intermetallics synthesized from powder sintering , 2000 .

[13]  L. Rong,et al.  Fabrication of cellular NiTi intermetallic compounds , 2000 .

[14]  Mahmoud Kadkhodaei,et al.  Finite Element Modeling of the Elastic Modulus of Ti6Al4V Scaffold Fabricated by SLM , 2013 .

[15]  M. Kadkhodaei,et al.  A Unit Cell Model for Simulating The Stress-Strain Response of Porous Shape Memory Alloys , 2015, Journal of Materials Engineering and Performance.

[16]  H Van Oosterwyck,et al.  The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. , 2012, Acta biomaterialia.

[17]  Horst Meier,et al.  Structural and functional properties of NiTi shape memory alloys produced by Selective Laser Melting , 2011 .

[18]  I. Shishkovsky.  Shape memory effect in porous volume NiTi articles fabricated by selective laser sintering , 2005 .

[19]  Ted A. Bateman,et al.  Porous Materials for Bone Engineering , 1997 .

[20]  Bert Müller,et al.  Tailoring Selective Laser Melting Process Parameters for NiTi Implants , 2012, Journal of Materials Engineering and Performance.

[21]  P. Griss,et al.  Implant fixation by bone ingrowth. , 1999, The Journal of arthroplasty.

[22]  Mahmoud Kadkhodaei,et al.  Effects of asymmetric material response on the mechanical behavior of porous shape memory alloys , 2016 .

[23]  Dazhi Yang,et al.  Microstructure of TiNi shape-memory alloy synthesized by explosive shock-wave compression of Ti–Ni powder mixture , 1997 .

[24]  M. Elahinia,et al.  A Modified Microplane Model Using Transformation Surfaces to Consider Loading History on Phase Transition in Shape Memory Alloys , 2014 .

[25]  W. Cantwell,et al.  The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures , 2010 .

[26]  S. Stupp,et al.  Porous NiTi for bone implants: a review. , 2008, Acta biomaterialia.

[27]  Xian-Jin Yang,et al.  Stress–strain behavior of porous NiTi alloys prepared by powders sintering , 2005 .

[28]  R. Rajapakse,et al.  Microplane modelling of shape memory alloys , 2007 .

[29]  Tae-Hyun Nam,et al.  In Vivo Result of Porous TiNi Shape Memory Alloy: Bone Response and Growth , 2002 .

[30]  H Meier,et al.  The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[31]  P. Tiernan,et al.  Production of Nitinol Wire from Elemental Nickel and Titanium Powders Through Spark Plasma Sintering and Extrusion , 2011, Journal of materials engineering and performance (Print).

[32]  M. Kadkhodaei,et al.  A Computationally Efficient Modeling Approach for Predicting Mechanical Behavior of Cellular Lattice Structures , 2014, Journal of Materials Engineering and Performance.

[33]  David Dean,et al.  Metals for bone implants. Part 1. Powder metallurgy and implant rendering. , 2014, Acta biomaterialia.

[34]  J. Tuukkanen,et al.  Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel-titanium bone graft substitute. , 2003, Biomaterials.

[35]  Eric L. Vandygriff,et al.  Processing and Characterization of NiTi Porous SMA by Elevated Pressure Sintering , 2002 .

[36]  Shuguang Li,et al.  Boundary conditions for unit cells from periodic microstructures and their implications , 2008 .

[37]  Horst Meier,et al.  Additive Manufacturing of Shape Memory Devices and Pseudoelastic Components , 2013 .

[38]  H. Meier,et al.  Selective Laser Melting of NiTi shape memory components , 2009 .

[39]  Mohammad Elahinia,et al.  An Investigation of Effective Process Parameters on Phase Transformation Temperature of Nitinol Manufactured by Selective Laser Melting , 2014 .

[40]  Bingyun Li,et al.  Microstructure and superelasticity of porous NiTi alloy , 1999 .

[41]  M. Elahinia,et al.  Manufacturing and processing of NiTi implants: A review , 2012 .

[42]  Recep Gümrük,et al.  Compressive behaviour of stainless steel micro-lattice structures , 2013 .

[43]  Bingyun Li,et al.  Porous NiTi alloy prepared from elemental powder sintering , 1998 .

[44]  Reza Mehrabi,et al.  Numerical Implementation of a Thermomechanical Constitutive Model for Shape Memory Alloys Using Return Mapping Algorithm and Microplane Theory , 2012 .

[45]  M. Bram,et al.  Powder Metallurgical Near‐Net‐Shape Fabrication of Porous NiTi Shape Memory Alloys for Use as Long‐Term Implants by the Combination of the Metal Injection Molding Process with the Space‐Holder Technique , 2009 .

[46]  M. Bram,et al.  Characterization of porous, net-shaped NiTi alloy regarding its damping and energy-absorbing capacity , 2011 .

[47]  B Vamsi Krishna,et al.  Low stiffness porous Ti structures for load-bearing implants. , 2007, Acta biomaterialia.

[48]  S. M. Ahmadi,et al.  Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. , 2015, Journal of the mechanical behavior of biomedical materials.

[49]  M. Kadkhodaei,et al.  A microplane constitutive model for shape memory alloys considering tension–compression asymmetry , 2015 .

[50]  Ivan P. Parkin,et al.  Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi , 2008 .

[51]  Mohsen Badrossamay,et al.  Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling , 2014 .

[52]  L. Brinson,et al.  Plastic and transformation interactions of pores in shape memory alloy plates , 2014 .

[53]  M. Bram,et al.  Reproducibility Study of NiTi Parts Made by Metal Injection Molding , 2012, Journal of Materials Engineering and Performance.

[54]  J. Planell,et al.  Mechanical properties of nickel–titanium foams for reconstructive orthopaedics , 2008 .

[55]  D. Dunand,et al.  High strength, low stiffness, porous NiTi with superelastic properties. , 2005, Acta Biomaterialia.

[56]  D. Dunand,et al.  Solid-state foaming of titanium by superplastic expansion of argon-filled pores , 2001 .

[57]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[58]  R. Khalifehzadeh,et al.  Prediction of the effect of vacuum sintering conditions on porosity and hardness of porous NiTi shape memory alloy using ANFIS , 2007 .

[59]  Horst Meier,et al.  On the Properties of Ni-Rich NiTi Shape Memory Parts Produced by Selective Laser Melting , 2012 .

[60]  David Dean,et al.  Process development and characterization of additively manufactured nickel–titanium shape memory parts , 2016 .

[61]  Mohammad Elahinia,et al.  A thermodynamically-consistent microplane model for shape memory alloys , 2014 .