The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates

Abstract Carbon fiber reinforced polymers (CFRP) have been increasingly used in aircraft structures. However, their relatively low electrical conductivity leads to the vulnerability to lightning strike. Herein, the carbon nanotube buckypaper-based coatings composed of conductive buckypaper and insulating adhesives were developed to protect the CFRP laminates. Their influence on the lightning strike protection (LSP) effectiveness was systematically studied and the possible mechanisms were discussed. It was demonstrated that the conductive layer of buckypaper could facilitate the lightning current to the ground and dissipate the energy. Moreover, a relatively thick insulating adhesive could hinder the transfer of the lightning current through the thickness direction to CFRP laminates, thus further enhance the LSP effectiveness. An optimized LSP coating developed in this work was composed of a ∼70 μm thick buckypaper and a ∼200 μm thick boron nitride modified epoxy insulating adhesive, which resulted in a weight reduction up to 30% compared to the commercial Cu LSP coating, and could sustain the simulated lightning strike with peak current up to 100 kA.

[1]  H. Wagner,et al.  Sensors and sensitivity: Carbon nanotube buckypaper films as strain sensing devices , 2011 .

[2]  Jinsong Leng,et al.  Self-heating fiber reinforced polymer composite using meso/macropore carbon nanotube paper and its application in deicing , 2014 .

[3]  A. Larsson.  The interaction between a lightning flash and an aircraft in flight , 2002 .

[4]  Daihua Zhang,et al.  Transparent, conductive, and flexible carbon nanotube films and their application in organic light-emitting diodes. , 2006 .

[5]  Zhong Zhang,et al.  A novel failure analysis of multi-walled carbon nanotubes in epoxy matrix , 2011 .

[6]  Zhong Zhang,et al.  Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes , 2011 .

[7]  H. Hng,et al.  n-Type carbon nanotubes/silver telluride nanohybrid buckypaper with a high-thermoelectric figure of merit. , 2014, ACS applied materials & interfaces.

[8]  Lifeng Liu,et al.  Directly synthesized strong, highly conducting, transparent single-walled carbon nanotube films. , 2007, Nano letters.

[9]  R. E. Tressler,et al.  High‐Temperature Oxidation of Boron Nitride: II, Boron Nitride Layers in Composites , 2004 .

[10]  A. Díez-Pascual,et al.  Carbon nanotube buckypaper reinforced acrylonitrile-butadiene-styrene composites for electronic applications. , 2013, ACS applied materials & interfaces.

[11]  F. Qin,et al.  Enhanced mechanical and electrical properties of carbon nanotube buckypaper by in situ cross-linking , 2013 .

[12]  Yoshiyasu Hirano,et al.  Coupled thermal–electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current , 2010 .

[13]  Qiang Zhang,et al.  High-performance flexible lithium-ion electrodes based on robust network architecture , 2012 .

[14]  Chuck Zhang,et al.  Electromagnetic interference shielding properties of carbon nanotube buckypaper composites , 2009, Nanotechnology.

[15]  Jennifer Fielding,et al.  Carbon nanofiber paper for lightning strike protection of composite materials , 2010 .

[16]  A. Cantarero,et al.  Effects of quantum statistics of phonons on the thermal conductivity of silicon and germanium nanoribbons , 2013, Nanoscale Research Letters.

[17]  Chuck Zhang,et al.  Highly conductive carbon nanotube buckypapers with improved doping stability via conjugational cross-linking , 2011, Nanotechnology.

[18]  Changhong Liu,et al.  Highly oriented carbon nanotube papers made of aligned carbon nanotubes , 2008, Nanotechnology.

[19]  Guorui Wang,et al.  CNT buckypaper/thermoplastic polyurethane composites with enhanced stiffness, strength and toughness , 2014 .

[20]  R. Vaidyanathan,et al.  Carbon Fiber–Bismaleimide Composites Filled with Nickel‐Coated Single‐Walled Carbon Nanotubes for Lightning‐Strike Protection , 2011 .

[21]  Akira Todoroki,et al.  Artificial lightning testing on graphite/epoxy composite laminate , 2010 .

[22]  D. Therriault,et al.  Lightning strike protection of composites , 2014 .

[23]  A. Rinzler,et al.  Carbon nanotube actuators , 1999, Science.

[24]  Ben Wang,et al.  Charge-induced asymmetrical displacement of an aligned carbon nanotube buckypaper actuator , 2010 .

[25]  K. Hata,et al.  Influence of lengths of millimeter-scale single-walled carbon nanotube on electrical and mechanical properties of buckypaper , 2013, Nanoscale Research Letters.

[26]  P. Ajayan,et al.  Ultrathin high-temperature oxidation-resistant coatings of hexagonal boron nitride , 2013, Nature Communications.

[27]  Anders Larsson,et al.  Voltage drop along a lightning channel during strikes to aircraft , 2005 .

[28]  S. Mall,et al.  Compression Strength Degradation of Nanocomposites after Lightning Strike , 2009 .

[29]  Mark A. Miller,et al.  Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike , 2009 .

[30]  Zhong Zhang,et al.  Friction and wear of high electrical conductive carbon nanotube buckypaper/epoxy composites , 2015 .

[31]  M. Chan-Park,et al.  High-strength carbon nanotube buckypaper composites as applied to free-standing electrodes for supercapacitors , 2013 .