Enhanced mechanical properties of an Mg-Zn-Ca alloy via high pressure torsion and annealing for use in bone implantation

[1]  T. Langdon,et al.  Using Plane Strain Compression Test to Evaluate the Mechanical Behavior of Magnesium Processed by HPT , 2022, Metals.

[2]  H. Lopez,et al.  Designing Advanced Biomedical Biodegradable Mg Alloys: A Review , 2022, Metals.

[3]  A. Hohenwarter,et al.  Mechanical Behavior and In Vitro Corrosion of Cubic Scaffolds of Pure Magnesium Processed by Severe Plastic Deformation , 2021, Metals.

[4]  A. Mazilkin,et al.  Phase Composition, Nanohardness and Young’s Modulus in Ti-Fe Alloys after Heat Treatment and High Pressure Torsion , 2021, Metals.

[5]  A. Cochis,et al.  Osteosynthesis devices in absorbable Magnesium alloy in comparison to standard ones: a Systematic Review on effectiveness and safety , 2021, Acta bio-medica : Atenei Parmensis.

[6]  M. Lerner,et al.  Surface Modification of Mg0.8Ca Alloy via Wollastonite Micro-Arc Coatings: Significant Improvement in Corrosion Resistance , 2021, Metals.

[7]  Devadas Bhat Panemangalore,et al.  Corrosion Behavior, Microstructure and Mechanical Properties of Novel Mg-Zn-Ca-Er Alloy for Bio-Medical Applications , 2021, Metals.

[8]  B. Chee,et al.  Ti-25Nb-25Ta alloy treated by plasma electrolytic oxidation in phosphoric acid for implant applications , 2021 .

[9]  M. Jahazi,et al.  Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process , 2021 .

[10]  K. Zhao,et al.  Enhanced corrosion resistance of bio-piezoelectric composite coatings on medical magnesium alloys , 2020 .

[11]  M. Fanetti,et al.  The Effects of Severe Plastic Deformation and/or Thermal Treatment on the Mechanical Properties of Biodegradable Mg-Alloys , 2020, Metals.

[12]  M. R. Sankar,et al.  Degradation kinetics and surface properties of bioceramic hydroxyapatite coated AZ31 magnesium alloys for biomedical applications , 2020 .

[13]  Sameehan S. Joshi,et al.  In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. , 2020, Materials science & engineering. C, Materials for biological applications.

[14]  G. Faraji,et al.  Microstructure, mechanical properties and bio-corrosion properties of Mg-HA bionanocomposites fabricated by a novel severe plastic deformation process , 2020 .

[15]  N. Al-Aqeeli,et al.  Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties , 2019, Journal of Alloys and Compounds.

[16]  M. Janbozorgi,et al.  Microstructural evolution, mechanical properties, and corrosion resistance of a heat-treated Mg alloy for the bio-medical application , 2019, Journal of Magnesium and Alloys.

[17]  M. Krishna,et al.  Magnesium matrix composites for biomedical applications: A review , 2019, Journal of Magnesium and Alloys.

[18]  R. Valiev,et al.  Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion , 2019, Scripta Materialia.

[19]  Shervin Eslami Harandi,et al.  Magnesium Implants: Prospects and Challenges , 2019, Materials.

[20]  T. Langdon,et al.  Processing Magnesium and Its Alloys by High‐Pressure Torsion: An Overview , 2018, Advanced Engineering Materials.

[21]  Yufeng Zheng,et al.  Advances in functionalized polymer coatings on biodegradable magnesium alloys - A review. , 2018, Acta biomaterialia.

[22]  K. Deng,et al.  Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ = 0, 2, 3, 5) alloys , 2017 .

[23]  Jeremy Goldman,et al.  The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper , 2017 .

[24]  M. Z. Omar,et al.  Strengthening of A2024 alloy by high-pressure torsion and subsequent aging , 2017 .

[25]  Liguo Wang,et al.  The microstructure and corrosion resistance of biological Mg–Zn–Ca alloy processed by high-pressure torsion and subsequently annealing , 2017 .

[26]  Liguo Wang,et al.  Effect of Solution Pretreatment on Homogeneity and Corrosion Resistance of Biomedical Mg–Zn–Ca Alloy Processed by High Pressure Torsion   , 2017 .

[27]  Yang Ke,et al.  Surface Modification on Biodegradable Magnesium Alloys as Orthopedic Implant Materials to Improve the Bio-adaptability: A Review , 2016 .

[28]  Y. Estrin,et al.  Strengthening of age-hardenable WE43 magnesium alloy processed by high pressure torsion , 2016 .

[29]  Liguo Wang,et al.  Microstructures and degradation mechanism in simulated body fluid of biomedical Mg–Zn–Ca alloy processed by high pressure torsion , 2016 .

[30]  Yunfei Ding,et al.  Effects of Mg17Sr2 Phase on the Bio‐Corrosion Behavior of Mg–Zr–Sr Alloys , 2016 .

[31]  G. Thouas,et al.  Metallic implant biomaterials , 2015 .

[32]  M. Medraj,et al.  Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys , 2014 .

[33]  Z. Horita,et al.  Hydrogen behavior in ultrafine-grained palladium processed by high-pressure torsion , 2013 .

[34]  N Birbilis,et al.  Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations. , 2012, Acta biomaterialia.

[35]  M. Peuster,et al.  Development and biocompatibility of a novel corrodible fluoride-coated magnesium-calcium alloy with improved degradation kinetics and adequate mechanical properties for cardiovascular applications. , 2009, Journal of biomedical materials research. Part A.

[36]  Zrnik Jozef,et al.  Ultrafine grained structure development in steel with different initial structure by severe plastic deformation , 2010 .

[37]  Lorenza Petrini,et al.  Evaluation of material properties and design requirements for biodegradable magnesium stents , 2010 .

[38]  Raju Adhikari,et al.  Recent developments in biodegradable synthetic polymers. , 2006, Biotechnology annual review.

[39]  S. Spigarelli,et al.  Review of creep behaviour of AZ91 magnesium alloy produced by different technologies , 2001 .

[40]  G. Song,et al.  Corrosion mechanisms of magnesium alloys , 1999 .

[41]  J. Kohn,et al.  Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. , 1991, Biomaterials.