论文信息 - Glass material model for the forming stage of the glass molding process

Glass material model for the forming stage of the glass molding process

The aim of this research is to obtain an accurate material model for glass that can be used in finite element (FE) analysis of the glass molding process. A thorough understanding of the deformation behavior of the glass specimens was acquired by performing uniaxial compression tests. The elasto-viscoplastic model was utilized for the glass material at the molding temperature to construct the FE model, and a suitable set of parameters for this material model was verified by comparing the simulation results to the experimental data. As a result, the feasibility of the elasto-viscoplastic model for glass at the molding temperature was confirmed; this material model can be used in FE analysis of the prediction and modification of properties of the final lens products.

[1] H. Burlet,et al. Viscoelastic behavior of a soda-lime-silica glass: inadequacy of the KWW function , 1997 .

[2] Anurag Jain,et al. Viscosity Measurement by Cylindrical Compression for Numerical Modeling of Precision Lens Molding Process , 2005 .

[3] Anurag Jain,et al. Compression Molding of Aspherical Glass Lenses–A Combined Experimental and Numerical Analysis , 2005 .

[4] George W. Scherer,et al. Relaxation in Glass and Composites , 1986 .

[5] Anurag Jain,et al. Numerical Modeling of Viscoelastic Stress Relaxation During Glass Lens Forming Process , 2005 .

[6] L. Duffrène,et al. New insights into the viscoelasticity of glass , 1994 .

[7] M. Hyre,et al. Numerical Simulation of Glass Forming and Conditioning , 2004 .

[8] A. Yi,et al. Precision laboratory apparatus for high temperature compression molding of glass lenses , 2005 .

[9] A. Yi,et al. Finite element modelling of stress relaxation in glass lens moulding using measured, temperature-dependent elastic modulus and viscosity data of glass , 2006 .

[10] L. Duffrène,et al. Viscoelastic constants of a soda-lime-silica glass , 1997 .

[11] Donald R Uhlmann,et al. Glass--science and technology , 1980 .

[12] Christian Brecher,et al. Development of a compression molding process for three-dimensional tailored free-form glass optics. , 2006, Applied optics.