Low-Resistance Cu-Sn Electroplated–Evaporated Microbumps for 3D Chip Stacking

Low-resistance copper-tin (Cu-Sn) microbumps, with sizes varying from 5 μm × 5 μm to 20 μm × 20 μm and formed by electroplating–evaporation bumping (EEB) technology for three-dimensional integration of large-scale integrated chips, have been evaluated for their microstructure and electrical resistance. It was inferred from x-ray diffraction data that the formation of low-resistance Cu3Sn intermetallic compound (IMC) is facilitated at higher bonding temperature. Electron probe microanalysis mapping showed that, even before bonding, Cu-Sn IMCs were formed at the interface between Cu and Sn, whereas they were sandwiched between the Cu of the upper and lower microbumps after bonding. Electron backscatter diffraction analysis revealed that the crystal orientation of Sn grains was sharply localized in the (100) orientation for physical vapor deposited (PVD) sample, while electroplated Sn film exhibited a mixed crystal orientation in all (100), (110), and (001) axes. A resistance value of ~35 mΩ per bump was obtained for Cu-Sn microbumps with area of 400 μm2, which is several times lower than the resistance value reported for Cu-Sn microbumps fabricated by a pure electroplating method. The low resistance value obtained for EEB-formed Cu-Sn microbumps after bonding is explained by (i) the reduced surface roughness for evaporated Sn, (ii) the high degree of crystal grain orientation resulting from layer-by-layer growth in the PVD Sn, despite their smaller grain size, and (iii) the absence of impurity segregation at grain boundaries.

[1]  C. Belouet,et al.  Control of the 2D/3D transition of the growth mechanism in the YBCO/Ce1−xLaxO2−x/2/SrTiO3 system , 1998 .

[2]  W. Gust,et al.  Intermetallic phase formation in thin solid-liquid diffusion couples , 1994 .

[3]  Qi Liu,et al.  Electrodeposition of tin: a simple approach , 2008 .

[4]  Jin Yu,et al.  Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering , 2008 .

[5]  Ping Wang,et al.  Surface roughness and resitivity of Au film on Si-(111) substrate , 2003 .

[6]  Mitsumasa Koyanagi,et al.  10 µm fine pitch Cu/Sn micro-bumps for 3-D super-chip stack , 2009, 2009 IEEE International Conference on 3D System Integration.

[7]  A. Survila,et al.  XRD studies of the phase composition of the electrodeposited copper-rich Cu–Sn alloys , 2006 .

[8]  Chih Chen,et al.  Electromigration in Sn–Cu intermetallic compounds , 2009 .

[9]  Jae-pyoung Ahn,et al.  The effect of electric current and surface oxidization on the growth of Sn whiskers , 2010 .

[10]  Hwa-Teng Lee,et al.  Influence of intermetallic compounds on the adhesive strength of solder joints , 2002 .

[11]  Kazumasa Tanida,et al.  Micro Cu Bump Interconnection on 3D Chip Stacking Technology , 2004 .

[12]  H. Bhadeshia,et al.  The metal science of joining: M.J. Cieslak, J.H. Perepezko, S. Kang and M.E. Glicksman (Eds) TMS, 1992, 329 pp, $140 , 1994 .

[13]  Y. Chan,et al.  Reliability studies of surface mount, solder joints-effect of Cu-Sn intermetallic compounds , 1995 .

[14]  Young-Ho Kim,et al.  Contact resistance and shear strength of the solder joints formed using Cu bumps capped with Sn or Ag/Sn layer , 2005 .

[15]  Xin Ma,et al.  Reactive wetting of solders on Cu and Cu6Sn5/Cu3Sn/Cu substrates using wetting balance , 2006 .

[16]  King-Ning Tu,et al.  Effect of current crowding on void propagation at the interface between intermetallic compound and solder in flip chip solder joints , 2006 .

[17]  Robert W. Messler,et al.  Microstructure evolution of eutectic Sn-Ag solder joints , 1994 .

[18]  Karen Maex,et al.  Influence of surface and grain-boundary scattering on the resistivity of copper in reduced dimensions , 2004 .

[19]  R. Balluffi,et al.  Effect of grain boundaries upon pore formation and dimensional changes during diffusion , 1955 .

[20]  Kazuaki Ano,et al.  Kirkendall void formation in eutectic SnPb solder joints on bare Cu and its effect on joint reliability , 2005 .

[21]  F. Zahid,et al.  Resistivity of thin Cu films with surface roughness , 2009 .

[22]  M. Eizenberg,et al.  The effect of surface roughness on the resistivity increase in nanometric dimensions , 2006 .

[23]  T. Ohmi,et al.  In situ Observation of Grain Growth on Electroplated Cu Film by Electron Backscatter Diffraction , 2009 .

[24]  Mitsumasa Koyanagi,et al.  High-Density Through Silicon Vias for 3-D LSIs , 2009, Proceedings of the IEEE.

[25]  M. Koyanagi,et al.  New Three-Dimensional Wafer Bonding Technology Using the Adhesive Injection Method. , 1998 .