A Differential-difference Approach for the Modeling of Electrical Floor Heating Systems

During recent years, many papers have been published concerning dimensioning, analysis, and control of floor heating. A central issue in all these activities is to create a suitable model, which explains the thermal behavior of the floor and its environment. The article introduces a differential-difference approach, which is believed to be new in floor heating modeling. The proposed method is applied in a slab, a semi-infinite and infinite solid, which are connected to electrical heating. The results are compared with the corresponding analytical solution. This also concerns the proportional heating control applied in the infinite solid. The comparison reveals the characteristic features of the differential-difference solution, which are briefly discussed. The first results are encouraging and show good model behavior.

[1]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[2]  Michael J. Davies,et al.  Temperatures in and under a slab-on-ground floor: two- and three-dimensional numerical simulations and comparison with experimental data , 2000 .

[3]  Bijan Farhanieh,et al.  A parametric study on radiant floor heating system performance , 2006 .

[4]  T. Y. Chen,et al.  Application of adaptive predictive control to a floor heating system with a large thermal lag , 2002 .

[5]  Suat Canbazoğlu,et al.  Unsteady thermal performance analysis of a room with serial and parallel duct radiant floor heating system using hot airflow , 2004 .

[6]  Jesper Kragh,et al.  Modelling floor heating systems using a validated two-dimensional ground-coupled numerical model , 2005 .

[7]  E. Pinney.  Ordinary difference-differential equations , 1960 .

[8]  J. Pakanen.  CONDUCTION OF HEAT THROUGH ONE- AND MULTILAYER SLABS: A DIFFERENTIAL-DIFFERENCE APPROACH , 1996 .

[9]  Abdelaziz Laouadi.  Development of a radiant heating and cooling model for building energy simulation software , 2004 .

[10]  Tim Weber,et al.  An optimized RC-network for thermally activated building components , 2005 .

[11]  Jerzy Gołȩbiowski,et al.  Dynamics of three-dimensional temperature field in electrical system of floor heating , 2002 .

[12]  Pekka Tuomaala,et al.  Uneven gridding of thermal nodal networks in floor heating simulations , 2007 .

[13]  Moncef Krarti,et al.  Foundation heat loss from heated concrete slab-on-grade floors , 2001 .

[14]  T. Y. Chen,et al.  Real-time predictive supervisory operation of building thermal systems with thermal mass , 2001 .

[15]  J. Saastamoinen.  Unsteady state temperature fields in a slab induced by line sources , 2007 .

[16]  Michaela Meir,et al.  Control and energy metering in low temperature heating systems , 2003 .

[17]  Jukka Rantala,et al.  Estimation of the Mean Temperature Distribution Underneath a Slab-on-ground Structure , 2005 .

[18]  Gilles Fraisse,et al.  Development of a simplified and accurate building model based on electrical analogy , 2002 .

[19]  Roger H. Rangel,et al.  Semi-analytical solution for heat transfer from a buried pipe with convection on the exposed surface , 1999 .

[20]  Sung-Hwan Cho,et al.  Optimal operation of an embedded-piping floor heating system with control input constraints , 1997 .

[21]  Marcel Lacroix,et al.  Fuzzy and feedforward control of an hybrid thermal energy storage system , 2006 .

[22]  S. H Cho,et al.  Predictive control of intermittently operated radiant floor heating systems , 2003 .

[23]  G. C. Bakos.  Energy management method for auxiliary energy saving in a passive-solar-heated residence using low-cost off-peak electricity , 2000 .