论文信息 - A noise temperature correction method for a microwave thermal noise source with three transmission lines

A noise temperature correction method for a microwave thermal noise source with three transmission lines

An easy method is presented to make noise temperature correction for the transmission line of a microwave thermal noise source by using three different transmission lines whose characteristics are not necessarily identical to one another. This is a more general method than the one already proposed using an auxiliary transmission line whose two transmission lines are required to be identical to each other and to the line of an unknown source in all characteristics. >

I. Yokoshima | Y. Kato

[1] K. Komiyama,et al. A method for evaluating the noise temperature of microwave thermal noise sources by introducing an auxiliary transmission line , 1988 .

[2] I. Yokoshima,et al. A Practical Method for Calibrating a Coaxial Noise Source with a Waveguide Standard , 1987, 1987 IEEE MTT-S International Microwave Symposium Digest.

[3] I. Yokoshima,et al. A 4-GHz band low-noise measurement system , 1987, IEEE Transactions on Instrumentation and Measurement.

[4] I. Yokoshima,et al. Direct measurement techniques of transmission line corrections for thermal noise standards , 1976, IEEE Transactions on Instrumentation and Measurement.

[5] Ichiro Yokoshima,et al. A Generalized Performance Analysis of One-Port Measuring Instruments with Signal Generators , 1972 .

[6] G. F. Engen,et al. A Method of Calibrating Coaxial Noise Sources in Terms of a Waveguide Standard , 1968 .

[7] C. T. Stelzried,et al. Microwave Thermal Noise Standards , 1968 .