Process parameter analysis of double pass friction stir composite welds

[1]  Husain Mehdi,et al.  Effect of nano-Sized Al2O3 Particles on Microstructure and Mechanical Properties of Aluminum Matrix Composite Fabricated by Multipass FSW , 2022, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[2]  S. Shekhar,et al.  Effect of Reinforcement Particles on Friction Stir Welded Joints with Scarf Configuration: an Approach to Achieve High Strength Joints , 2021, Silicon.

[3]  A. Shettigar,et al.  Parameter investigation and optimization of friction stir welded AA6061/TiO2 composites through TLBO , 2021, Welding in the World.

[4]  Hao Zhang,et al.  Effect of High Rotational-Speed Friction-Stir Welding on Microstructure and Properties of Welded Joints of 6061-T6 Al Alloy Ultrathin Plate , 2021, Materials.

[5]  J. Dhas,et al.  FSSW process parameter optimization for AA2024 and AA7075 alloy , 2021, Materials and Manufacturing Processes.

[6]  T. Sathish,et al.  Parameters Optimization of Dissimilar Friction Stir Welding for AA7079 and AA8050 through RSM , 2021, Advances in Materials Science and Engineering.

[7]  Vinod Kumar,et al.  Optimization of friction stir welding parameters of dissimilar aluminium alloys 6061 and 5083 by using response surface methodology , 2021, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[8]  V. Mohanavel,et al.  Microstructure and Mechanical Properties of Friction Stir Welded SiC/TiB2 Reinforced Aluminum Hybrid Composites , 2021, Silicon.

[9]  P. Sevvel,et al.  Simulation of heat transfer and analysis of impact of tool pin geometry and tool speed during friction stir welding of AZ80A Mg alloy plates , 2020, Journal of Mechanical Science and Technology.

[10]  P. Sevvel,et al.  Peak Temperature Correlation and Temperature Distribution during Joining of AZ80A Mg Alloy by FSW – A Numerical and Experimental Investigation , 2020 .

[11]  P. Sevvel,et al.  Generation of regression models and multi-response optimization of friction stir welding technique parameters during the fabrication of AZ80A Mg alloy joints , 2020, Transactions of the Canadian Society for Mechanical Engineering.

[12]  T. Singh,et al.  Effect of nano-sized particles on grain structure and mechanical behavior of friction stir welded Al-nanocomposites , 2020, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[13]  A. T. Abbas,et al.  Effect of Feed Rate in FSW on the Mechanical and Microstructural Properties of AA5754 Joints , 2019, Advances in Materials Science and Engineering.

[14]  T. Sornakumar,et al.  Friction stir welding of hybrid AA 6061-ZrO2-C composites FSW process optimization using desirability approach , 2019, Materials Research Express.

[15]  M. B. Kiran,et al.  Investigation of friction stir processing effect on AA 2014-T6 , 2018, Materials and Manufacturing Processes.

[16]  S. M. Murigendrappa,et al.  Effect of Tool Rotation Speed on Microstructure and Tensile Properties of FSW Joints of 2024-T351 and 7075-T651 Reinforced With SiC Nano Particle: The Role of FSW Single Pass , 2018 .

[17]  T. Mahmoud,et al.  Microstructure examination and microhardness of friction stir welded joint of (AA7020-O) after PWHT , 2018 .

[18]  Her-Yueh Huang,et al.  Friction-stir welding of aluminum alloy with an iron-based metal as reinforcing material , 2018 .

[19]  M. Farahani,et al.  Dissimilar friction stir welding of 7075 aluminum alloy to AZ31 magnesium alloy using SiC nanoparticles , 2016 .

[20]  R. Parameshwaran,et al.  Multiresponse Optimization of FSW Parameters for Cast AA7075/SiCp Composite , 2016 .

[21]  A. Astarita,et al.  Mechanical characterization by DOE analysis of AA6156-T4 friction stir welded joints in as-welded and post-weld aged condition , 2015 .

[22]  Mohsen Bahrami,et al.  Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes , 2015 .

[23]  Yufeng Sun,et al.  The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints , 2011 .

[24]  T. Srivatsan,et al.  Influence of Tool Geometry in Friction Stir Welding , 2008 .

[25]  S. P. Shanmuganatan,et al.  Investigation of effect of process parameters on friction stir welded dissimilar AA6061 T6 and AA7075 T651 , 2020 .

[26]  Satheesh C,et al.  Experimental Identification of Optimized Process Parameters for FSW of AZ91C Mg Alloy Using Quadratic Regression Models , 2020 .

[27]  S. Narendranath,et al.  Effect of FSW on microstructure and hardness of AA6061/SiC/fly ash MMCs , 2018 .