Comparison between Up-milling and Down-milling Operations on Tool Wear in Milling Inconel 718

[1]  D. G. Flom,et al.  On the Catastrophic Shear Instability in High-Speed Machining of an AISI 4340 Steel , 1982 .

[2]  Gábor Stépán,et al.  Stability of up-milling and down-milling, part 1: alternative analytical methods , 2003 .

[3]  A. Moufki,et al.  A review of developments towards dry and high speed machining of Inconel 718 alloy , 2004 .

[4]  C. K. Toh,et al.  Comparison of chip surface temperature between up and down milling orientations in high speed rough milling of hardened steel , 2005 .

[5]  Capabilities of Cermets Tools for High Speed Machining of Austenitic Stainless Steel , 2006 .

[6]  XiaoQi Chen,et al.  An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts , 2006 .

[7]  Keith Ridgway,et al.  Optimisation of tool life and productivity when end milling inconel 718TM , 2007 .

[8]  Viktor P. Astakhov,et al.  Effects of the cutting feed, depth of cut, and workpiece (bore) diameter on the tool wear rate , 2007 .

[9]  Konstantinos-Dionysios Bouzakis,et al.  Increasing tool life by adjusting the milling cutting conditions according to PVD films’ properties , 2008 .

[10]  Yunn-Shiuan Liao,et al.  Behaviors of end milling Inconel 718 superalloy by cemented carbide tools , 2008 .

[11]  A. Velayudham,et al.  Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach , 2010 .

[12]  S. Joshi,et al.  Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718 , 2012 .

[13]  D. Aspinwall,et al.  Tool wear/life evaluation when finish turning Inconel 718 using PCBN tooling , 2012 .

[14]  J. Ståhl,et al.  Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools , 2012 .

[15]  Song Zhang,et al.  Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions , 2012 .

[16]  Mohd Amri Sulaiman,et al.  Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718 , 2013 .