Biodiesel production using alumina-supported calcium oxide: An optimization study

Abstract This study consists of the optimization of the methyl ester yields produced via transesterification of palm oil using CaO/Al 2 O 3 solid base catalyst. Response Surface Methodology (RSM) in combination with Central Composite Design (CCD) was used to optimize the operating parameters. Alcohol/oil molar ratio, catalyst content in the reaction medium and reaction temperature were chosen as the variables and the response selected was the amount of methyl ester yields. All the reactions were performed in a batch laboratory scale reactor for 5 h; the optimum reaction conditions obtained were approximately alcohol/oil molar ratio of 12:1, catalyst content of 6 wt.% and reaction temperature of 65 °C. The results from ICP-MS exhibited insignificant leaching of the CaO active species into the reaction medium and the reusability of the catalyst was successfully tested in two subsequent cycles. Under certain reaction conditions the glycerol obtained was almost colorless.

[1]  Saeid Baroutian,et al.  Density of palm oil-based methyl ester , 2008 .

[2]  Yujun Wang,et al.  Transesterification of soybean oil to biodiesel using CaO as a solid base catalyst , 2008 .

[3]  Diana C.S. Azevedo,et al.  CaO supported on mesoporous silicas as basic catalysts for transesterification reactions , 2008 .

[4]  Yujun Wang,et al.  Transesterification of soybean oil to biodiesel using SrO as a solid base catalyst , 2007 .

[5]  C. Nicolini,et al.  Increase of catalytic activity of lipase towards olive oil by Langmuir-film immobilization of lipase , 2009 .

[6]  Wenlei Xie,et al.  Transesterification of soybean oil catalyzed by potassium loaded on alumina as a solid-base catalyst , 2006 .

[7]  W. Daud,et al.  Activity of solid catalysts for biodiesel production: A review , 2009 .

[8]  M. G. Kulkarni,et al.  Transesterification of canola oil in mixed methanol/ethanol system and use of esters as lubricity additive. , 2007, Bioresource technology.

[9]  A. Demirbas,et al.  Importance of biodiesel as transportation fuel , 2007 .

[10]  A. Demirbas,et al.  BIODIESEL FROM SUNFLOWER OIL IN SUPERCRITICAL METHANOL WITH CALCIUM OXIDE , 2007 .

[11]  G. Vicente,et al.  Optimisation of integrated biodiesel production. Part I. A study of the biodiesel purity and yield. , 2007, Bioresource technology.

[12]  Dora E. López,et al.  Transesterification of triacetin with methanol on solid acid and base catalysts , 2005 .

[13]  G. Vicente,et al.  Integrated biodiesel production: a comparison of different homogeneous catalysts systems. , 2004, Bioresource technology.

[14]  C. Ngamcharussrivichai,et al.  Modified dolomites as catalysts for palm kernel oil transesterification , 2007 .

[15]  Ligong Chen,et al.  Calcined Mg–Al hydrotalcites as solid base catalysts for methanolysis of soybean oil , 2006 .

[16]  Wan Mohd Ashri Wan Daud,et al.  Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology , 2009 .

[17]  Chawalit Ngamcharussrivichai,et al.  Al2O3-supported alkali and alkali earth metal oxides for transesterification of palm kernel oil and coconut oil. , 2009 .

[18]  Jesus Santamaria,et al.  Biodiesel from sunflower oil by using activated calcium oxide , 2007 .

[19]  Wenlei Xie,et al.  Soybean oil transesterification over zinc oxide modified with alkali earth metals , 2007 .

[20]  Robert L. McCormick,et al.  Combustion of fat and vegetable oil derived fuels in diesel engines , 1998 .

[21]  Juhun Song,et al.  Biodiesel combustion, emissions and emission control , 2007 .