Simplified analysis of fracture behaviour of a Francis hydraulic turbine runner blade

Each welded connection between blades and band or crown of a Francis hydraulic turbine runner can be considered as a T-joint subjected to pure bending induced by the water action. A semi-elliptical crack is assumed to exist at the surface of one of the aforementioned welded connections. The actual geometry of the T-joint can be simplified, that is, only the cracked plate (representing the blade) under a given stress distribution acting on the defect faces is examined. A numerical procedure already proposed by the authors to compute the stress-intensity factor (SIF) along the crack front is here applied by introducing some changes to simplify such computations. The obtained values of SIF are compared with some results available in the literature.

[1]  Chow-Shing Shin,et al.  Experimental and finite element analyses on stress intensity factors of an elliptical surface crack in a circular shaft under tension and bending , 2004 .

[2]  Andrea Carpinteri,et al.  A numerical analysis on the interaction of twin coplanar flaws , 2004 .

[3]  Paolo Matteis,et al.  Fatigue crack growth in inhomogeneous steel components , 2010 .

[4]  Uwe Zerbst,et al.  An investigation on the influence of rotary bending and press fitting on stress intensity factors and fatigue crack growth in railway axles , 2008 .

[5]  G. Glinka,et al.  Stress Analysis and Fatigue of welded structures , 2011 .

[6]  Ashok Saxena,et al.  J-integral expressions for semi-elliptical cracks in round bars , 2007 .

[7]  Hans-Jörg Huth,et al.  Fatigue Design of Hydraulic Turbine Runners , 2005 .

[8]  Feargal Brennan,et al.  An experimental and analytical study of fatigue crack shape control by cold working , 2008 .

[9]  Thierry Jacob,et al.  Francis Turbine Surge: Discussion and Data Base , 1996 .

[10]  X. Niu,et al.  Stress-intensity factors for semi-elliptical surface cracks in welded joints , 1989 .

[11]  Andrea Carpinteri,et al.  Shape change of surface cracks in round bars under cyclic axial loading , 1993 .

[12]  Andrea Carpinteri,et al.  Notched double-curvature shells with cracks under pulsating internal pressure , 2009 .

[13]  Sebastian Muntean,et al.  Failure analysis of a Francis turbine runner , 2010 .

[14]  Jesús Toribio,et al.  Compliance evolution in round cracked bars under tensile fatigue , 2011 .

[15]  I. L. Lim,et al.  On stress intensity factor computation from the quarter‐point element displacements , 1992 .

[16]  Andrea Carpinteri,et al.  Notched shells with surface cracks under complex loading , 2006 .

[17]  James C. Newman,et al.  An empirical stress-intensity factor equation for the surface crack , 1981 .

[18]  Sylvie Pommier,et al.  An empirical stress intensity factor set of equations for a semi-elliptical crack in a semi-infinite body subjected to a polynomial stress distribution. , 1999 .

[19]  Andrea Carpinteri,et al.  Fatigue growth of a surface crack in a welded T-joint , 2005 .

[20]  Filippo Berto,et al.  Stress distributions in notched structural components under pure bending and combined traction and bending , 2005 .

[21]  Filippo Berto,et al.  Stress concentration factors of periodic notches determined from the strain energy density , 2011 .

[22]  C. Hou,et al.  Simulation of surface crack shape evolution using the finite element technique and considering the crack closure effects , 2011 .