Durability of Perfluorosulfonic Acid and Hydrocarbon Membranes: Effect of Humidity and Temperature

The effect of humidity on the chemical stability of two types of membranes [i.e., perfluorosulfonic acid type (PFSA, Nafion 112) and biphenyl sulfone hydrocarbon type, (BPSH-35)] was studied by subjecting the membrane electrode assemblies (MEAs) to open-circuit voltage (OCV) decay and potential cycling tests at elevated temperatures and low inlet-gas relative humidities. The BPSH-35 membranes showed poor chemical stability in ex situ Fenton tests compared to that of Nafion membranes. However, under fuel cell conditions, BPSH-35 MEAs outperformed Nafion 112 MEAs in both the OCV decay and potential cycling tests. For both membranes, (i) at a given temperature, membrane degradation was more pronounced at lower humidities and (ii) at a given relative humidity operation, increasing the cell temperature accelerated membrane degradation. Mechanical stability of these two types of membranes was also studied using relative humidity (RH) cycling. Due to decreased swelling and contraction during wet-up and dry-out cycles, Nafion 112 lasted longer than BPSH-35 membranes in the RH cycling test.

[1]  John W. Weidner,et al.  Hydrogen Peroxide Formation Rates in a PEMFC Anode and Cathode Effect of Humidity and Temperature , 2020, 2002.09476.

[2]  H. Yeager,et al.  Perfluorinated Ionomer Membranes , 1982 .

[3]  Tetsuo Sakai,et al.  Gas Diffusion in the Dried and Hydrated Nafions , 1986 .

[4]  Eiji Endoh,et al.  Degradation study of MEA for PEMFCs under low humidity conditions , 2004 .

[5]  Peter S. Fedkiw,et al.  An Impregnation‐Reduction Method to Prepare Electrodes on Nafion SPE , 1989 .

[6]  T. Kyu,et al.  Mechanical Relaxations in Perfluorosulfonate Ionomer Membranes , 1982 .

[7]  Hubert A. Gasteiger,et al.  Instability of Pt ∕ C Electrocatalysts in Proton Exchange Membrane Fuel Cells A Mechanistic Investigation , 2005 .

[8]  Jianyi Lin,et al.  XRD and XPS analysis of the degradation of the polymer electrolyte in H2–O2 fuel cell , 2003 .

[9]  D. Wilkinson,et al.  Aging mechanisms and lifetime of PEFC and DMFC , 2004 .

[10]  J. C. Olsen,et al.  THE AMERICAN INSTITUTE OF CHEMICAL ENGINEERS. , 1912, Science.

[11]  Eiji Endoh,et al.  Degradation study of MEA for PEMFCs under low humidity conditions , 2004 .

[12]  Thomas F. Fuller,et al.  PEM Fuel Cell Pt ∕ C Dissolution and Deposition in Nafion Electrolyte , 2007 .

[13]  A. Eisenberg,et al.  Physical properties and supermolecular structure of perfluorinated ion‐containing (nafion) polymers , 1977 .

[14]  D. Curtin,et al.  Advanced materials for improved PEMFC performance and life , 2004 .

[15]  Trung Van Nguyen,et al.  Effect of Thickness and Hydrophobic Polymer Content of the Gas Diffusion Layer on Electrode Flooding Level in a PEMFC , 2005 .

[16]  C. Walling.  Fenton's reagent revisited , 1975 .

[17]  K. Ota,et al.  Consumption Rate of Pt under Potential Cycling , 2007 .

[18]  H. Takenaka,et al.  Solid polymer electrolyte water electrolysis , 1982 .

[19]  Michael A. Hickner,et al.  Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes , 2002 .

[20]  M. Hickner,et al.  Alternative polymer systems for proton exchange membranes (PEMs). , 2004, Chemical reviews.

[21]  Peter S. Fedkiw,et al.  In Situ Electrode Formation on a Nafion Membrane by Chemical Platinization , 1992 .

[22]  Hubert A. Gasteiger,et al.  Aspects of the Chemical Degradation of PFSA Ionomers used in PEM Fuel Cells , 2005 .

[23]  J. Kerres.  Development of ionomer membranes for fuel cells , 2001 .

[24]  J. Hedrick,et al.  Molecular basis of the β-transition in poly(arylene ether sulfones) , 1986 .