The OECD/NEA/CSNI SOAR on scaling (the S-SOAR)

[1]  Nicolas Mérigoux,et al.  Two-phase CFD validation: TOPFLOW-PTS steady-state steam-water tests 3–16, 3–17, 3–18 and 3–19 , 2016 .

[2]  M. Freitag,et al.  THAI test facility for experimental research on hydrogen and fission product behaviour in light water reactor containments , 2015 .

[3]  Víctor Manuel Martínez Quiroga,et al.  Scaling-up methodology : a systematical procedure for qualifying NPP nodalizations. Application to the OECD/NEA ROSA-2 and PKL-2 Counterpart test , 2014 .

[4]  S. Nakao,et al.  Development of High Accurate Flow Nozzle for Feedwater Flowrate Measurement in Nuclear Power Plant , 2014 .

[5]  Hyun-Sik Park,et al.  Design of the VISTA-ITL Test Facility for an Integral Type Reactor of SMART and a Post-Test Simulation of a SBLOCA Test , 2014 .

[6]  Francesc Reventos,et al.  Applying UPC Scaling-Up Methodology to the LSTF-PKL Counterpart Test , 2014 .

[7]  Francesc Reventos,et al.  The Use of System Codes in Scaling Studies: Relevant Techniques for Qualifying NPP Nodalizations for Particular Scenarios , 2014 .

[8]  D. S. Pilkhwal,et al.  Entrainment phenomenon in gas–liquid two-phase flow: A review , 2013 .

[9]  Luis E. Herranz,et al.  Thermal-hydraulic-iodine chemistry coupling: Insights gained from the SARNET benchmark on the THAI experiments Iod-11 and Iod-12 , 2013 .

[10]  B. Simondi-Teisseire,et al.  Overview of the facility and experiments performed in Phébus FP , 2013 .

[11]  Hyun-Sik Park,et al.  SMR accident simulation in experimental test loop , 2013 .

[12]  Jun Yang,et al.  Counterpart experimental study of ISP-42 PANDA tests on PUMA facility , 2013 .

[13]  F. D’AURIA,et al.  PERSPECTIVES IN SYSTEM THERMAL-HYDRAULICS , 2012 .

[14]  M. Guingo,et al.  Validation of the Large Interface Method of NEPTUNE_CFD 1.0.8 for Pressurized Thermal Shock (PTS) applications , 2012 .

[15]  Arun K. Nayak,et al.  Capability of the RELAP5 code to simulate natural circulation behavior in test facilities , 2012 .

[16]  Francesco Saverio D'Auria,et al.  The Best Estimate Plus Uncertainty (BEPU) approach in licensing of current nuclear reactors , 2012 .

[17]  Klaus Umminger,et al.  Integral Test Facility PKL: Experimental PWR Accident Investigation , 2012 .

[18]  Francesco Saverio D'Auria,et al.  Analyses of the OSU-MASLWR Experimental Test Facility , 2012 .

[19]  B. Woods,et al.  Analysis of Primary/Containment Coupling Phenomena Characterizing the MASLWR Design During a SBLOCA Scenario , 2012 .

[20]  Mário Augusto Bezerra da Silva,et al.  DETERMINATION OF A TEST SECTION PARAMETERS FOR IRIS NUCLEAR REACTOR PRESSURIZER , 2011 .

[21]  Francesco Saverio D'Auria,et al.  Sensitivity analysis of the MASLWR helical coil steam generator using TRACE , 2011 .

[22]  Kyung Doo Kim,et al.  DEVELOPMENT OF THE SPACE CODE FOR NUCLEAR POWER PLANTS , 2011 .

[23]  Dominique Bestion,et al.  FROM THE DIRECT NUMERICAL SIMULATION TO SYSTEM CODES - PERSPECTIVE FOR THE MULTI-SCALE ANALYSIS OF LWR THERMALHYDRAULICS , 2010 .

[24]  Donghua Lu,et al.  A new method to derive one set of scaling criteria for reactor natural circulation at single and two-phase conditions , 2010 .

[25]  Francesco Saverio D'Auria,et al.  Scaling in nuclear reactor system thermal-hydraulics , 2010 .

[26]  U. Hampel,et al.  Experimental studies and CFD calculations for buoyancy driven mixing phenomena , 2010 .

[27]  N. Zuber,et al.  Scaling: From quanta to nuclear reactors , 2010 .

[28]  O. Simonin,et al.  Macroscopic modeling of thermal dispersion for turbulent flows in channels , 2010 .

[29]  P. D. Sampaio,et al.  Fractional scaling method applied to a pressurizer test facility , 2010 .

[30]  Brian Jackson,et al.  Scaling analysis for the high temperature Gas Reactor Test Section (GRTS) , 2010 .

[31]  Ivan Catton,et al.  Application of Fractional Scaling Analysis to Loss of Coolant Accidents: Component Level Scaling for Peak Clad Temperature , 2009 .

[32]  Mamoru Ishii,et al.  Void fraction and flow regime in adiabatic upward two-phase flow in large diameter vertical pipes , 2009 .

[33]  Shripad T. Revankar,et al.  Scaling of passive condenser system for separate effect testing , 2009 .

[34]  Paride Meloni,et al.  The SPES3 Experimental Facility Design for the IRIS Reactor Simulation , 2009 .

[35]  Ivan Catton,et al.  Application of Fractional Scaling Analysis to Loss of Coolant Accidents, System Level Scaling for System Depressurization , 2009 .

[36]  Hyun-Sik Park,et al.  EXPERIMENTS ON THE PERFORMANCE SENSITIVITY OF THE PASSIVE RESIDUAL HEAT REMOVAL SYSTEM OF AN ADVANCED INTEGRAL TYPE REACTOR , 2009 .

[37]  Hyun-Sik Park,et al.  Experimental study on the natural circulation of a passive residual heat removal system for an integral reactor following a safety related event , 2008 .

[38]  Yeon-Sik Kim,et al.  Development of a pump performance model for an integral effect test facility , 2008 .

[39]  Byong-Jo Yun,et al.  Scaling methodology for a reduced-height reduced-pressure integral test facility to investigate direct vessel injection line break SBLOCA , 2008 .

[40]  Francesco Saverio D'Auria,et al.  Use of the Natural Circulation Flow Map for Natural Circulation Systems Evaluation , 2008 .

[41]  Horst Glaeser,et al.  GRS Method for Uncertainty and Sensitivity Evaluation of Code Results and Applications , 2008 .

[42]  Timothy G. Trucano,et al.  Verification and validation benchmarks , 2008 .

[43]  Soeren Kliem,et al.  Experiments at the mixing test facility ROCOM for benchmarking of CFD codes , 2008 .

[44]  Hyun-Sik Park,et al.  An assessment of a LBLOCA similarity for a reduced-height integral effect test loop design for PWRs , 2007 .

[45]  Jose N. Reyes,et al.  Testing of the multi-application small light water reactor (MASLWR) passive safety systems , 2007 .

[46]  Ivan Catton,et al.  Application of fractional scaling analysis (FSA) to loss of coolant accidents (LOCA): Methodology development , 2007 .

[47]  Pascal Lemaitre,et al.  Experimental investigation in the TOSQAN facility of heat and mass transfers in a spray for containment application , 2007 .

[48]  C. Grandjean.  Coolability of blocked regions in a rod bundle after ballooning under LOCA conditions: Main findings from a review of past experimental programmes , 2007 .

[49]  Won-Pil Baek,et al.  THERMAL-HYDRAULIC TESTS AND ANALYSES FOR THE APR1400'S DEVELOPMENT AND LICENSING , 2007 .

[50]  Borut Mavko,et al.  Scaling of the Small-Scale Thermal-Hydraulic Transient to the Real Nuclear Power Plant , 2007 .

[51]  J. P. Magnaud,et al.  International standard problem on containment thermal-hydraulics ISP47 Step 1—Results from the MISTRA exercise , 2007 .

[52]  Y. Sibamoto,et al.  In-pile Experiment in JMTR on the Radiation Induced Surface Activation (RISA) Effect on Flow-boiling Heat Transfer , 2007 .

[53]  Annalisa Manera,et al.  The multipurpose thermalhydraulic test facility TOPFLOW: an overview on experimental capabilities, instrumentation and results , 2006 .

[54]  P. Sagaut,et al.  A macroscopic turbulence model for flow in porous media suited for channel, pipe and rod bundle flows , 2006 .

[55]  Francesco Saverio D'Auria,et al.  Quantitative assessment of thermal–hydraulic codes used for heavy water reactor calculations , 2006 .

[56]  Won-Pil Baek,et al.  KAERI Integral Effect Test Program and the ATLAS Design , 2005 .

[57]  Paride Meloni,et al.  Design, experiments and Relap5 code calculations for the perseo facility , 2005 .

[58]  Jose Reyes,et al.  Natural Circulation in Water Cooled Nuclear Power Plants Phenomena, models, and methodology for system reliability assessments , 2005 .

[59]  G. Park,et al.  Integral Test and Engineering Analysis of Coolant Depletion during a Large-Break Loss-of-Coolant Accident , 2005 .

[60]  Soeren Kliem,et al.  Fluid mixing and flow distribution in the reactor circuit, measurement data base , 2005 .

[61]  Dong-Jin Euh,et al.  Scaling for the ECC bypass phenomena during the LBLOCA reflood phase , 2004 .

[62]  Chien-Hsiung Lee,et al.  Adequacy of Power-to-Mass Scaling in Simulating PWR Incident Transient for Reduced-Height, Reduced-Pressure and Full-Height, Full-Pressure Integral System Test Facilities , 2004 .

[63]  Pierre Babka,et al.  Multi-Application Small Light Water Reactor Final Report , 2003 .

[64]  Mamoru Ishii,et al.  One-dimensional drift–flux model for two-phase flow in a large diameter pipe , 2003 .

[65]  Annalisa Manera,et al.  Planned experimental studies on natural-circulation and stability performance of boiling water reactors in four experimental facilities and first results (NACUSP) , 2003 .

[66]  George Yadigaroglu,et al.  Trends and needs in experimentation and numerical simulation for LWR safety , 2003 .

[67]  Frank-Peter Weiss,et al.  Experimental and Numerical Investigation of Boron Dilution Transients in Pressurized Water Reactors , 2003 .

[68]  Francesco Saverio D'Auria,et al.  Review of quantitative accuracy assessments with fast Fourier transform based method (FFTBM) , 2002 .

[69]  Frank-Peter Weiss,et al.  Coolant mixing in a PWR - de-boration transients, steam line breaks and emergency core cooling injection - experiments and analyses , 2002 .

[70]  Francesco Saverio D'Auria,et al.  Use of a natural circulation map for assessing PWR performance , 2002 .

[71]  N. Zuber,et al.  The effects of complexity, of simplicity and of scaling in thermal-hydraulics , 2001 .

[72]  Jose N. Reyes,et al.  PTS thermal hydraulic testing in the OSU APEX facility , 2001 .

[73]  W. Kastner,et al.  Thermal hydraulics of PWRS with respect to boron dilution phenomena. Experimental results from the test facilities PKL and UPTF , 2001 .

[74]  Francesco Saverio D'Auria,et al.  Development of a Code with the Capability of Internal Assessment of Uncertainty , 2000 .

[75]  Jose N. Reyes,et al.  Comparative Study of Station Blackout Counterpart Tests in APEX and ROSA/AP600 , 2000 .

[76]  Marino di Marzo,et al.  Transition from depressurization to long term cooling in AP600 scaled integral test facilities , 1999 .

[77]  Victor H. Ransom,et al.  Use of an ideal scaled model for scaling evaluation , 1998 .

[78]  B. E. Boyack,et al.  An integrated structure and scaling methodology for severe accident technical issue resolution: Development of methodology , 1998 .

[79]  Jose N. Reyes,et al.  Scaling analysis for the OSU AP600 test facility (APEX) , 1998 .

[80]  T. K. Larson,et al.  Scaling in the safety of next generation reactors , 1998 .

[81]  Per F. Peterson,et al.  Scaling for integral simulation of mixing in large, stratified volumes , 1998 .

[82]  Chien-Hsiung Lee,et al.  Power-operated relief valve stuck-open accident and recovery scenarios in the Institute of Nuclear Energy Research integral system test facility , 1998 .

[83]  G. E. Wilson,et al.  The role of the PIRT process in experiments, code development and code applications associated with Reactor Safety analysis , 1998 .

[84]  Himanshu Pokharna,et al.  The three-level scaling approach with application to the Purdue University Multi-Dimensional Integral Test Assembly (PUMA) , 1998 .

[85]  P. Vijayan,et al.  Adequacy of Power-to-volume Scaling Philosophy to Simulate Natural Circulation in Integral Test Facilities , 1998 .

[86]  Patrick J. Roache,et al.  Verification and Validation in Computational Science and Engineering , 1998 .

[87]  Francesco Saverio D'Auria,et al.  Determination of Code Accuracy in Predicting Small-Break LOCA Experiment , 1997 .

[88]  Chien-Hsiung Lee,et al.  IIST and LSTF counterpart test on PWR station blackout transient , 1997 .

[89]  Wolfgang Wulff,et al.  Scaling of thermohydraulic systems , 1996 .

[90]  Hiroshige Kumamaru,et al.  ROSA/AP600 Testing: Facility Modifications and Initial Test Results , 1996 .

[91]  A. Levin,et al.  A practical view of the insights from scaling thermal-hydraulic tests , 1995 .

[92]  C. Medich,et al.  SPES-2, AP600 intergral system test S01007 2 inch CL to core make-up tank pressure balance line break , 1995 .

[93]  H. Karwat,et al.  The evaluation of the bubble condenser containment of VVER-440/213 plants , 1995 .

[94]  Pallippattu Krishnan Vijayan,et al.  Scaling laws for single-phase natural circulation loops , 1994 .

[95]  JoséN. Reyes,et al.  Scaling single-state variable catastrophe functions: an application to two-phase natural circulation , 1994 .

[96]  R. Deruaz,et al.  Loss of residual heat removal during mid-loop operation : BETHSY experiments , 1994 .

[97]  Ezra Elias,et al.  Two-phase critical flow , 1994 .

[98]  Robert F. Mudde,et al.  Two-phase flow scaling laws for a simulated BWR assembly , 1994 .

[99]  J. Kouhia,et al.  Natural circulation experiments with a VVER reactor geometry , 1994 .

[100]  T. V. D. Hagen,et al.  Scaling laws and design aspects of a natural-circulation-cooled simulated boiling water reactor fuel assembly , 1994 .

[101]  H. Karwat,et al.  The contribution of UPTF experiments to resolve some scale-up uncertainties in countercurrent two phase flow , 1993 .

[102]  K. Wolfert,et al.  Two-phase flow phenomena in full-scale reactor geometry , 1993 .

[103]  H. Akimoto,et al.  Large-scale multi-dimensional phenomena found in CCTF and SCTF experiments , 1993 .

[104]  Francesco Saverio D'Auria,et al.  Scaling of complex phenomena in system thermal hydraulics , 1993 .

[105]  Francesco Saverio D'Auria,et al.  Scaling of the accuracy of the Relap5/mod2 code , 1993 .

[106]  F. D'Auria,et al.  Relevant results obtained in the analysis of LOBI/MOD2 natural circulation experiment A2-77A , 1992 .

[107]  Horst Glaeser,et al.  Downcomer and tie plate countercurrent flow in the Upper Plenum Test Facility (UPTF) , 1992 .

[108]  Francesco Saverio D'Auria,et al.  Scaling of natural circulation in PWR systems , 1991 .

[109]  Y. Y. Hsu,et al.  On the scaling of pressure for integral test facilities , 1991 .

[110]  T. Maciaszek,et al.  CATHARE phase separation modeling for small breaks in horizontal pipes with stratified flow , 1990 .

[111]  D. Bestion,et al.  The physical closure laws in the CATHARE code , 1990 .

[112]  R. Deruaz,et al.  Investigation of PWR accident situations at BETHSY facility , 1990 .

[113]  T. K. Larson,et al.  Scaling analysis for a Savannah River reactor scaled model integral system , 1990 .

[114]  Hiroshige Kumamaru,et al.  The effects of break location on PWR small break LOCA: Experimental study at the ROSA-IV LSTF , 1990 .

[115]  C. Unal,et al.  Scaling-modeling for small break LOCA test facilities , 1990 .

[116]  Upendra S. Rohatgi,et al.  Bias in peak clad temperature predictions due to uncertainties in modeling of ECC bypass and dissolved non-condensable gas phenomena , 1990 .

[117]  P. J. Ingham,et al.  LOCA assessment experiments in a full-elevation, CANDU-typical test facility , 1990 .

[118]  Francesco Saverio D'Auria,et al.  Assessment of the RELAP5/MOD2 Code on the Basis of Experiments Performed in the LOBI Facility , 1990 .

[119]  B. E. Boyack,et al.  Quantifying reactor safety margins Part 5: Evaluation of scale-up capabilities of best estimate codes☆ , 1990 .

[120]  B. E. Boyack,et al.  Quantifying reactor safety margins part 4: Uncertainty evaluation of lbloca analysis based on trac-pf1/mod 1 , 1990 .

[121]  B. E. Boyack,et al.  Quantifying reactor safety margins part 3: Assessment and ranging of parameters , 1990 .

[122]  B. E. Boyack,et al.  Quantifying reactor safety margins part 2: Characterization of important contributors to uncertainty , 1990 .

[123]  Mamoru Ishii,et al.  Droplet entrainment correlation in annular two-phase flow , 1989 .

[124]  J. Eriksson,et al.  Assessment of RELAP5/MOD2, Cycle 36. 04 against FIX-II guillotine break experiment No. 5061 , 1989 .

[125]  Y. Y. Hsu,et al.  The phenomenology of a small break loca in a complex thermal hydraulic loop , 1988 .

[126]  Gerald M. Weinberg,et al.  General principles of systems design , 1988 .

[127]  K. Schneider,et al.  Physical model for reactor coolant pumps , 1988 .

[128]  Jun Sugimoto,et al.  Summary of CCTF test results - assessment of current safety evaluation analysis on reflood behavior during a LOCA in a PWR with cold-leg-injection-type ECCS☆ , 1988 .

[129]  Taisuke Yonomoto,et al.  New theoretical model for two-phase flow discharged from stratified two-phase region through small break. , 1988 .

[130]  H. Karwat,et al.  Scaling and extrapolation of hydrogen distribution experiments , 1987 .

[131]  Kanji Tasaka,et al.  BWR small break LOCA counterpart tests at ROSA-III and FIST test facilities , 1987 .

[132]  K. Rust,et al.  PWR reflood experiments using full length bundles of rods with zircaloy claddings and alumina pellets: Results of the SEFLEX program , 1987 .

[133]  C. Smoglie,et al.  Two phase flow through small breaks in a horizontal pipe with stratified flow , 1987 .

[134]  J. R. Gloudemans,et al.  Once-through integral system (OTIS): Final report , 1986 .

[135]  G. Katzenmeier,et al.  Reactor safety research at the large scale facility HDR , 1985 .

[136]  Ikeda Takashi,et al.  BWR Recirculation Line Break Simulation Tests at Two Bundle Loop , 1985 .

[137]  Okitsugu Furuya,et al.  An Analytical Model for Prediction of Two-Phase (Noncondensable) Flow Pump Performance , 1985 .

[138]  F. D'Auria,et al.  Assessment of scaling criteria adopted in designing nuclear power plants experimental simulators , 1985 .

[139]  Kataoka Isao,et al.  Mechanistic modeling of pool entrainment phenomenon , 1984 .

[140]  M. Ishii,et al.  Scaling laws for thermal-hydraulic system under single phase and two-phase natural circulation , 1984 .

[141]  A G Stephens,et al.  BWR Full Integral Simulation Test (FIST) program: facility description report , 1984 .

[142]  H. J. Richter,et al.  Separated two-phase flow model: application to critical two-phase flow , 1983 .

[143]  I. Kataoka,et al.  Similarity analysis and scaling criteria for LWRs under single-phase and two-phase natural circulation , 1983 .

[144]  G. L. Sozzi,et al.  BWR large-break simulation tests: BWR Blowdown/Emergency Core Cooling Program. Volume 2. Appendices I-N , 1982 .

[145]  H. C. Yeh,et al.  PWR FLECHT SEASET unblocked bundle, forced and gravity reflood task. Data evaluation and analysis report. [PWR] , 1982 .

[146]  T. Eckert,et al.  BWR refill-reflood program: core spray distribution experimental task plan , 1981 .

[147]  Yukio Sudo,et al.  Film Boiling Heat Transfer during Reflood Phase in Postulated PWR Loss-of-Coolant Accident , 1980 .

[148]  G. D. McPherson,et al.  LOFT facility and test program , 1979 .

[149]  Frank S. Castellana,et al.  Scaling laws for modeling nuclear reactor systems , 1979 .

[150]  C. N. Cary,et al.  Downcomer effects in a 1/15-scale PWR geometry-experimental data report , 1977 .

[151]  K. Aziz,et al.  A flow pattern map for gas—liquid flow in horizontal pipes , 1974 .

[152]  Warren M. Rohsenow,et al.  Dispersed flow film boiling , 1968 .

[153]  S. S. Wilks.  Determination of Sample Sizes for Setting Tolerance Limits , 1941 .

[154]  L. Matteo,et al.  SCALING CONSIDERATIONS ABOUT LWR CORE THERMALHYDRAULICS , 2015 .

[155]  J. Yurko,et al.  DEMONSTRATION OF TEST FACILITY DESIGN OPTIMIZATION WITH THE DYNAMICAL SYSTEM SCALING METHODOLOGY , 2015 .

[156]  F. Mascari,et al.  Scaling issues for the experimental characterization of reactor coolant system in integral test facilities and role of system code as extrapolation tool , 2015 .

[157]  Francesco Saverio D'Auria,et al.  Scaling rationale design and extrapolation problem for ITF and SETF , 2014 .

[158]  Lee,et al.  SMART: The First Licensed Advanced Integral Reactor , 2014 .

[159]  Sayan Gupta,et al.  Uncertainty Evaluation in Best Estimate Accident Analysis of NPPs , 2013 .

[160]  Francesco Saverio D'Auria,et al.  Thermal-Hydraulics: from Fundamentals to Applications , 2013 .

[161]  B. Wolf,et al.  Analysis of Blowdown Event in Small Modular Natural Circulation Integral Test Facility , 2013 .

[162]  Stephan Leyer,et al.  The Integral Test Facility Karlstein , 2012 .

[163]  Paride Meloni,et al.  SPES3 Facility RELAP5 Sensitivity Analyses on the Containment System for Design Review , 2012 .

[164]  Bolado Lavin Ricardo,et al.  Natural Circulation Phenomena and Modelling for Advanced Water Cooled Reactors , 2012 .

[165]  L. Perneczky,et al.  PMK-2, the First Integral Thermal-Hydraulics Tests for the Safety Evaluation of VVER-440/213 Nuclear Power Plants , 2012 .

[166]  Holger Wolff,et al.  Experimental Studies for the VVER-440/213 Bubble Condenser System for Kola NPP at the Integral Test Facility BC V-213 , 2012 .

[167]  Domenico Paladino,et al.  PANDA: A Multipurpose Integral Test Facility for LWR Safety Investigations , 2012 .

[168]  Virpi Kouhia,et al.  PACTEL and PWR PACTEL Test Facilities for Versatile LWR Applications , 2012 .

[169]  B. Niceno,et al.  CFD MODELING OF ADIABATIC BUBBLY FLOW , 2011 .

[170]  Diana Caraghiaur,et al.  CFD modeling of boiling annular-mist flow for dryout investigations , 2011 .

[171]  Yann Bartosiewicz,et al.  Two-phase CFD: the various approaches and their applicability to each flow regime , 2011 .

[172]  Yann Bartosiewicz,et al.  CFD modeling of free surface flow with and without condensation , 2011 .

[173]  A. Del Nevo,et al.  Core Exit Temperature Effectiveness in Accident Management of Nuclear Power Reactor , 2010 .

[174]  Edward David Blandford,et al.  Physical Similitude in Hierarchical Engineered Systems , 2010 .

[175]  Tomasz Kozlowski,et al.  Assessment of two-phase critical models performance in RELAP5 and TRACE against Marviken critical flow test , 2010 .

[176]  J. Reyes.  GOVERNING EQUATIONS IN TWO-PHASE FLUID NATURAL CIRCULATION FLOWS , 2010 .

[177]  Dominique Bestion,et al.  EXTENSION OF CFD CODES APPLICATION TO TWO-PHASE FLOW SAFETY PROBLEMS , 2010 .

[178]  Francesco Saverio D'Auria,et al.  Passive Safety Systems and Natural Circulation in Water Cooled Nuclear Power Plants , 2009 .

[179]  Francesc Reventos,et al.  Thermal-Hydraulic Analysis Tasks for ANAV NPPs in Support of Plant Operation and Control , 2008 .

[180]  H. Glaeser,et al.  Best Estimate Safety Analysis for Nuclear Power Plants: Uncertainty Evaluation. IAEA Safety Report Series , 2008 .

[181]  Hans-Josef Allelein,et al.  International standard problem ISP-47 on containment thermal hydraulics - Final report , 2007 .

[182]  Claude Grandjean,et al.  A State-Of-The-Art Review of Past Programs Devoted to Fuel Behavior Under LOCA Conditions. Part Two: Impact of clad swelling upon assembly cooling. , 2006 .

[183]  Francesco Saverio D'Auria,et al.  Analysis of measured and calculated counterpart test data in PWR and VVER 1000 simulators , 2005 .

[184]  G. Verdú.  Forsmark 1 & 2 Boiling Water Reactor Stability Benchmark Time Series Analysis Methods for Oscillation during BWR Operation Final Report , 2001 .

[185]  Francesco Saverio D'Auria,et al.  Validation Matrix for the assessment of Thermal-Hydraulic codes for VVER LOCA and Transient , 2001 .

[186]  F. D'auria,et al.  Natural Circulation Limits achievable in a PWR , 2000 .

[187]  Heikki Purhonen,et al.  General description of the PACTEL test facility , 1998 .

[188]  Francesco Saverio D'Auria,et al.  Code validation and uncertainties in system thermalhydraulics , 1998 .

[189]  Francesco Saverio D'Auria,et al.  Overview of Uncertainty Issues and Methodologies , 1998 .

[190]  Francesco Saverio D'Auria,et al.  Report of the Uncertainty Methods Study for advanced best estimate thermalhydraulic code applications , 1998 .

[191]  Francesco Saverio D'Auria,et al.  USE AND QUALIFICATION OF THE UMAE UNCERTAINTY METHODOLOGY HAVING AS BASIS THE CATHARE2 CODE , 1998 .

[192]  Francesco Saverio D'Auria,et al.  Good Practices for User Effect Reduction , 1998 .

[193]  J Liebert,et al.  UPTF experiment. Flow phenomena during full-scale loop seal clearing of a PWR , 1998 .

[194]  I. V. Novozhilov.  Fractional Analysis: Methods of Motion Decomposition , 1997 .

[195]  E. Chojnacki,et al.  Post-test analysis of counterpart tests in Lobi, Spes, Bethsy and Lstf facilities performed with Cathare2 code , 1996 .

[196]  F. D'auria,et al.  Outline of the uncertainty methodology based on accuracy extrapolation , 1995 .

[197]  Francesco Saverio D'Auria,et al.  A proposed Methodology for the Analysis of a Phenomenon in Separate Effects and Integral Test Facilities , 1995 .

[198]  中村 秀夫.  Slug flow transitions in horizontal gas/liquid two-phase flows : dependence on channel height and system pressure for air/water and steam/water two-phase flows , 1995 .

[199]  井口 正.  Study on thermal-hydraulics during a PWR reflood phase , 1994 .

[200]  Francesco Saverio D'Auria,et al.  Evaluation of the data base from high power and low power small break LOCA counterpart tests performed in LOBI, SPES, BETHSY and LSTF facilities , 1994 .

[201]  G. M. Galassi,et al.  Evaluation of the data base from computer codes calculations of small break LOCA counterpart tests performed in LOBI, SPES, BETHSY and LSTF facilities , 1993 .

[202]  Francesco Saverio D'Auria,et al.  Comparative Analysis of Accident Management Procedures in LOBI and SPES Facilities , 1992 .

[203]  P. Maugeri,et al.  Analysis of Counterpart Tests Performed in Boiling Water Reactor Experimental Simulators , 1992 .

[204]  J. M. Healzer,et al.  A void fraction correlation for generalized applications , 1992 .

[205]  HERBERT A. SIMON,et al.  The Architecture of Complexity , 1991 .

[206]  Francesco Saverio D'Auria,et al.  Comparison Report of the OECD/CSNI International Standard Problem 21 (PIPER-ONE Experiment PO-SB-7). CSNI Report , 1989 .

[207]  Francesco Saverio D'Auria,et al.  Thermohydraulics of Emergency Core Cooling in Light Water Reactors - A State-of-the-Art Report. CSNI Report , 1989 .

[208]  Francesco Saverio D'Auria,et al.  Planning of Counterpart Tests in LWR Experimental Simulators , 1988 .

[209]  Francesco Saverio D'Auria,et al.  CSNI Code Validation Matrix of Thermo-Hydraulic Codes for LWR LOCA and Transients , 1987 .

[210]  T. Maciaszek.  Etude des écoulements diphasiques eau-vapeur dans un branchement en té , 1987 .

[211]  F. D'Auria,et al.  Proposed Set of Criteria in Designing Nuclear Power Plants Experimental Simulators , 1985 .

[212]  F. D'Auria,et al.  Specialists Meeting on Small Break LOCA Analyses in LWRs , 1985 .

[213]  G. D. McPherson,et al.  Scaling and instrumentation of the LOFT facility , 1985 .

[214]  K. Rust,et al.  FEBA - flooding experiments with blocked arrays. Evaluation report , 1984 .

[215]  D. Groeneveld,et al.  Low-quality and subcooled film boiling of water at elevated pressures , 1982 .

[216]  I. Kataoka,et al.  Scaling criteria for LWR's under single-phase and two-phase natural circulation , 1982 .

[217]  P. Vigni,et al.  PIPER-ONE, an Experimental Apparatus to Evaluate Thermalhydraulic Transients in BWRs after Small Breaks , 1981 .

[218]  L. Tong.  Water reactor safety research , 1979 .

[219]  V. T. Berta,et al.  ECC delivery and distribution in scaled PWR experiments , 1978 .

[220]  U. S. Rohatgi,et al.  Non-equilibrium one-dimensional two-phase flow in variable area channels , 1975 .

[221]  W. Cottrell.  Water-reactor safety-research information meeting , 1974 .

[222]  J. A. Norberg,et al.  SIMULATED DESIGN BASIS ACCIDENT TESTS OF THE CAROLINAS VIRGINIA TUBE REACTOR CONTAINMENT. Final Report. , 1970 .

[223]  R. A. Cudnik,et al.  SIMILITUDE CONSIDERATIONS FOR MODELING NUCLEAR REACTOR BLOWDOWNS. , 1969 .

[224]  F. Dittus,et al.  Heat transfer in automobile radiators of the tubular type , 1930 .