On-line real-time mistuning identification and model calibration method for rotating blisks based on blade tip timing (BTT)

Abstract Identifying the mistuning parameters and calibrating the finite element model (FEM) of the mistuned blisk in real-time is a meaningful way to acquire the blisk’s dynamic characteristics and predict its stress response. Because of the wearing and other reasons, the blisk’s mistuning is changing during the operation. Hence a BTT based rotating-blisk mistuning identification and model calibration (BR-IDC) method in real-time has become a necessity. The rotating effects (stiffening, softening and Coriolis force) are considered in the BR-IDC. The synergistic effect of the mass and stiffness mistuning is analyzed, and the effect is presented by a standard mistuning coefficient. Based on the BR-IDC, the on-line real-time mistuning identification for the rotating blisk is realized. Furthermore, the FEM was calibrated by the identification results. The BR-IDC approach is verified by FEM simulation and experimental work. The precision of the FEM is improved through the calibration.

[1]  Bogdan I. Epureanu,et al.  Models for blisks with large blends and small mistuning , 2017 .

[2]  Xulong Zhang,et al.  A novel none once per revolution blade tip timing based blade vibration parameters identification method , 2020 .

[3]  Zheng Hu,et al.  Sparse reconstruction of blade tip-timing signals for multi-mode blade vibration monitoring , 2016 .

[4]  Teresa Maria Berruti,et al.  Synchronous vibration parameters identification by tip timing measurements , 2017 .

[5]  Qihang Li,et al.  An improved non-contact dynamic stress measurement method for turbomachinery rotating blades based on fundamental mistuning model , 2020 .

[6]  Florence Nyssen,et al.  Identification of Mistuning and Model Updating of an Academic Blisk Based on Geometry and Vibration Measurements , 2016 .

[7]  Carlos Martel,et al.  Maximum mistuning amplification of the forced response vibration of turbomachinery rotors in the presence of aerodynamic damping , 2017 .

[8]  P. S. Heyns,et al.  A stochastic hybrid blade tip timing approach for the identification and classification of turbomachine blade damage , 2019, Mechanical Systems and Signal Processing.

[9]  Branislav Titurus,et al.  Efficient computational techniques for mistuning analysis of bladed discs: A review , 2017 .

[10]  Kuo Mo Hsiao,et al.  Free vibration analysis of rotating Euler beams at high angular velocity , 2010 .

[11]  Ya Zhang,et al.  New step to improve the accuracy of blade tip timing method without once per revolution , 2019 .

[12]  D. J. Ewins,et al.  Prediction of Vibration Response Levels of Mistuned Integral Bladed Disks (Blisks): Robustness Studies , 2012 .

[13]  Sunil K. Sinha,et al.  Rotordynamic analysis of asymmetric turbofan rotor due to fan blade-loss event with contact-impact rub loads , 2013 .

[14]  SangJoon Shin,et al.  Mistuned bladed disk forced vibration analysis based on standing wave formulation , 2013 .

[15]  Stefano Zucca,et al.  A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disks , 2011 .

[16]  Zdenek Kubin,et al.  Calibration of blade tip-timing sensor for shrouded 40″ last stage blade , 2018 .

[17]  Fajie Duan,et al.  Blade resonance parameter identification based on tip-timing method without the once-per revolution sensor , 2016 .

[18]  Jerry H. Griffin,et al.  A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes , 2001 .

[19]  José Picheral,et al.  Blade vibration study by spectral analysis of tip-timing signals with OMP algorithm , 2019, Mechanical Systems and Signal Processing.

[20]  Jize Zhong,et al.  Effect of coriolis force on forced response magnification of intentionally mistuned bladed disk , 2017 .

[21]  J. H. Griffin,et al.  Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model-Part I: Theory (2003-GT-38952) , 2004 .

[22]  Wei Sun,et al.  Mistuning identification and model updating of coating blisk based on modal test , 2019, Mechanical Systems and Signal Processing.

[23]  Evgeny Petrov,et al.  Mistuning sensitivity and optimization for bladed disks using high-fidelity models , 2019, Mechanical Systems and Signal Processing.

[24]  Jingjing He,et al.  A novel mode shape reconstruction method for damage diagnosis of cracked beam , 2019, Mechanical Systems and Signal Processing.

[25]  Matthew P. Castanier,et al.  Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions , 2006 .

[26]  Christophe Pierre,et al.  Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds , 1998 .

[27]  Qiu Zhiping,et al.  Interval Finite Element Analysis of Wing Flutter , 2008 .

[28]  Philip Bonello,et al.  A novel method for the determination of the change in blade tip timing probe sensing position due to steady movements , 2019, Mechanical Systems and Signal Processing.

[29]  Christophe Pierre,et al.  Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration , 2003 .

[30]  Joseph A. Beck,et al.  Mistuning Evaluation Comparison Via As-Manufactured Models, Traveling Wave Excitation, and Compressor Rigs , 2018, Journal of Engineering for Gas Turbines and Power.

[31]  J. A. Rodríguez,et al.  Fatigue of steam turbine blades at resonance conditions , 2019, Engineering Failure Analysis.

[32]  Teresa Maria Berruti,et al.  Forced response of rotating bladed disks: Blade Tip-Timing measurements , 2017 .

[33]  Bogdan I. Epureanu,et al.  Experimental modal identification of mistuning in an academic two-stage drum , 2017 .

[34]  Kiran D'Souza,et al.  Parametric Reduced Order Models for Bladed Disks With Mistuning and Varying Operational Speed , 2019, Journal of Engineering for Gas Turbines and Power.

[35]  J. H. Griffin,et al.  Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model-Part II: Application (2003-GT-38953) , 2004 .

[36]  J. R. Banerjee,et al.  Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects , 2014 .

[37]  Ji-wang Zhang,et al.  A Blade Defect Diagnosis Method by Fusing Blade Tip Timing and Tip Clearance Information , 2018, Sensors.

[38]  P. S. Heyns,et al.  Improved Blade Tip Timing measurements during transient conditions using a State Space Model , 2019, Mechanical Systems and Signal Processing.

[39]  S. Zucca,et al.  Hybrid reduction of mistuned bladed disks for nonlinear forced response analysis with dry friction , 2019, International Journal of Non-Linear Mechanics.