Three different mathematical models to predict the hot deformation behavior of TA32 titanium alloy

[1]  A. Ashmawy,et al.  Biocompatibility and corrosion resistance of low-cost Ti–14Mn–Zr alloys , 2021, Journal of Materials Research.

[2]  Jing Shi,et al.  Physically based constitutive modeling for Ti17 alloy with original basketweave microstructure in β forging: A comparison of three approaches , 2021, Materials Characterization.

[3]  Qingjiang Wang,et al.  Effect of annealing temperature on microstructure, texture and tensile properties of TA32 sheet , 2021 .

[4]  H. Gong,et al.  Research on compression deformation behavior of aging AA6082 aluminum alloy based on strain compensation constitutive equation and PSO-BP network model , 2021 .

[5]  Zhuanni Gao,et al.  Numerical simulation to study the effects of different laser cladding sequences on residual stress and deformation of Ti-6Al-4V/WC , 2021, Journal of Materials Research.

[6]  M. Zhan,et al.  Mesoscale deformation mechanisms in relation with slip and grain boundary sliding in TA15 titanium alloy during tensile deformation , 2021 .

[7]  Xiao‐nong Cheng,et al.  An Improved Constitutive Model Based on BP Artificial Neural Network and 3D Processing Maps of a Spray-Formed Al–Cu–Li Alloy , 2021, Transactions of the Indian Institute of Metals.

[8]  N. Li,et al.  Analysis of the active slip mode during compression of the near-α titanium alloy in the α + β phase-field: Insights from the results of electron backscattered diffraction , 2021 .

[9]  Y. Lin,et al.  Microstructure evolution and a unified constitutive model for a Ti-55511 alloy deformed in β region , 2021, Journal of Alloys and Compounds.

[10]  Ahmed O. Mosleh,et al.  Characterization of Superplastic Deformation Behavior for a Novel Al-Mg-Fe-Ni-Zr-Sc Alloy: Arrhenius-Based Modeling and Artificial Neural Network Approach , 2021, Applied Sciences.

[11]  Jinghui Li,et al.  Application of four different models for predicting the high-temperature flow behavior of TG6 titanium alloy , 2021 .

[12]  S. Murty,et al.  Recent advances in processing of titanium alloys and titanium aluminides for space applications: A review , 2021, Journal of Materials Research.

[13]  S. Suwas,et al.  Hot deformation and softening response in boronmodified two‐phase titanium aluminide Ti–48Al–2V–0.2B , 2020, Journal of Materials Research.

[14]  Z. Shen,et al.  Comparative study of metamodeling methods for modeling the constitutive relationships of the TC6 titanium alloy , 2020 .

[15]  Ahmed O. Mosleh,et al.  High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling , 2020, Materials.

[16]  Ahmed O. Mosleh,et al.  Modelling approach for predicting the superplastic deformation behaviour of titanium alloys with strain hardening/softening characterizations , 2019, Materials Research Express.

[17]  Jie Zhou,et al.  Constitutive modelling, dynamic globularization behavior and processing map for Ti-6Cr-5Mo-5V-4Al alloy during hot deformation , 2019, Journal of Alloys and Compounds.

[18]  Hao Li,et al.  Effect of the Zener-Hollomon parameter on the dynamic recrystallization kinetics of Mg–Zn–Zr–Yb magnesium alloy , 2019, Computational Materials Science.

[19]  Ahmed O. Mosleh,et al.  Superplastic forming of Ti-4Al-3Mo-1V alloy: flow behavior modelling and finite element simulation , 2019, Procedia Manufacturing.

[20]  Jun Chen,et al.  A new flow stress model based on Arrhenius equation to track hardening and softening behaviors of Ti6Al4V alloy , 2017, Rare Metals.

[21]  Yuehua Wu,et al.  Microstructure, texture evolution and mechanical properties of cold rolled Ti-32.5Nb-6.8Zr-2.7Sn biomedical beta titanium alloy , 2017 .

[22]  Jianrong Liu,et al.  Effect of texture on anisotropy at 600 °C in a near-α titanium alloy Ti60 plate , 2017 .

[23]  Amit Singh,et al.  Effect of rolling mode and annealing temperature on microstructure and texture of commercially pure-titanium , 2017 .

[24]  A. Ghosh,et al.  Effect of crystallographic texture on ratcheting response of commercially pure titanium , 2017 .

[25]  S. M. Abbasi,et al.  Constitutive modeling for high-temperature flow behavior of Ti-6242S alloy , 2017 .

[26]  L. Zhuang,et al.  Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression , 2016 .

[27]  F. Ozturk,et al.  Application of Electric Resistance Heating Method on Titanium Hot Forming at Industrial Scale , 2016 .

[28]  Yangyu Wang,et al.  Mechanism of the anisotropy of yield ratio in TA5 titanium alloy plates , 2015 .

[29]  Guifa Li,et al.  A comparative study on constitutive equations and artificial neural network model to predict high-temperature deformation behavior in Nitinol 60 shape memory alloy , 2015 .

[30]  Guo-Quan Liu,et al.  Physically based constitutive analysis to predict flow stress of medium carbon and vanadium microalloyed steels , 2014 .

[31]  J. Jonas,et al.  Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions , 2014 .

[32]  Amit Kumar Maheshwari,et al.  Prediction of flow stress for hot deformation processing , 2013 .

[33]  J. Cabrera,et al.  Constitutive relationships for hot deformation of austenite , 2011 .

[34]  Jue Zhong,et al.  Constitutive modeling for elevated temperature flow behavior of 42CrMo steel , 2008 .

[35]  J. Jonas,et al.  Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions , 1997 .

[36]  C. Sellars,et al.  On the mechanism of hot deformation , 1966 .

[37]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .