Sensors and sensitivity: Carbon nanotube buckypaper films as strain sensing devices

Abstract In this study we explore the effect of applied strain on the electrical resistance of carbon nanotube buckypaper films encapsulated in several types of epoxy resins. We find that such buckypaper sensors are indeed able to measure strains in polymers with different elastic properties and that the electrical resistance change similarly for all polymers tested here. For highly ductile polymers, the resistance change of the buckypaper sensors can be measured for strains higher than 30%, thus demonstrating surprisingly high sensitivity at large deformations. Different electromechanical responses are observed when the buckypapers are made of single-walled or multi-walled carbon nanotubes. The response of the buckypapers to the stress and strain distributions locally induced by well defined defects deliberately introduced into the resins is also assessed. The buckypaper sensors are found to be sensitive to the geometry of local defects.

[1]  A. B. Kaiser,et al.  Effect of chemical treatment on electrical conductivity, infrared absorption, and Raman spectra of single-walled carbon nanotubes. , 2005, The journal of physical chemistry. B.

[2]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[3]  M. Álvarez,et al.  Rapid generation of protein aerosols and nanoparticles via SAW atomisation , 2008 .

[4]  Tsu-Wei Chou,et al.  Real-time in situ sensing of damage evolution in advanced fiber composites using carbon nanotube networks , 2008, Nanotechnology.

[5]  V. Shanov,et al.  Introduction to carbon nanotube and nanofiber smart materials , 2006 .

[6]  Yong Jung Kim,et al.  Pore structure and oxidation stability of double-walled carbon nanotube-derived bucky paper , 2005 .

[7]  C. Levy,et al.  Multiwalled carbon nanotube film for strain sensing , 2008, Nanotechnology.

[8]  Chunyu Li,et al.  Sensors and actuators based on carbon nanotubes and their composites: A review , 2008 .

[9]  N. Kotov,et al.  Multifunctional layer-by-layer carbon nanotube–polyelectrolyte thin films for strain and corrosion sensing , 2007 .

[10]  A. V. Kats,et al.  On Resonance Diffraction of High Frequency Radiation at Periodically Corrugated Semiconductor Surfaces , 2006, 2006 International Conference on Mathematical Methods in Electromagnetic Theory.

[11]  Qiang Zhang,et al.  The feasibility of producing MWCNT paper and strong MWCNT film from VACNT array , 2008 .

[12]  A. Rinzler,et al.  Resistance vs. pressure of single-wall carbon nanotubes , 1998 .

[13]  Tsu-Wei Chou,et al.  Modeling of damage sensing in fiber composites using carbon nanotube networks , 2008 .

[14]  Charles M. Lieber,et al.  Probing Electrical Transport in Nanomaterials: Conductivity of Individual Carbon Nanotubes , 1996, Science.

[15]  Karl Schulte,et al.  Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix , 2008 .

[16]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[17]  J. Coleman,et al.  The relationship between network morphology and conductivity in nanotube films , 2008 .

[18]  Marco Buongiorno Nardelli,et al.  Mechanical deformations and coherent transport in carbon nanotubes , 1999 .

[19]  Meijie Tang,et al.  Reversible electromechanical characteristics of carbon nanotubes underlocal-probe manipulation , 2000, Nature.

[20]  N. Hu,et al.  Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .

[21]  I. Kiricsi,et al.  Multiwall carbon nanotube films surface‐doped with electroceramics for sensor applications , 2008 .

[22]  Satish Nagarajaiah,et al.  Nanotube film based on single-wall carbon nanotubes for strain sensing , 2004 .