Investigating the performance of “Smart Probe” based indirect EMI technique for strength development monitoring of cementitious materials : modelling and parametric study

Abstract Electromechanical impedance (EMI) technique has been proven effective in strength development monitoring of early age cementitious materials with the aid of statistical tools. The critical limitation of this technique lies in that no parametric evaluation of the cementitious material can be provided. This is partially due to the inconsistency of the baseline of the measured impedance signatures. The recently developed Smart Probe based indirect EMI technique overcomes the abovementioned drawbacks of this technique, enabling parametric estimation of the cementitious material being monitored. The influence of various physical parameters of the Smart Probe on its performance in curing monitoring of cementitious material has not been investigated. In this study, the analytical model of the Smart Probe previously proposed by the authors is improved. In the improved model, the distributed stiffness and mass of the embedded segment of the Smart Probe are explicitly formulated in the governing equations of motion, allowing more realistic predictions of the actual dynamic features of the Smart Probe-cementitious material system. A 3-D coupled field finite element (FE) model is also established to predict the admittance spectrum of the Smart Probe embedded in cementitious material. It is found that multiple resonance peaks in the conductance spectrum computed by FE simulation are in good agreement with the experimental data in terms of resonance frequency. The resonance peaks predicted by both the FE and the analytical models exhibit the same trend of movement as the experiment throughout the curing process, which verifies the effectiveness of the proposed models in monitoring the strength development process of cementitious materials. Parametric study conducted on the Smart Probe shows that the effect of the Poisson’s ratio of the cementitious material on the resonance frequency is limited when compared with that of the dynamic modulus. It is also found that the dimensions and position of the PZT patch influence the magnitude and the sharpness of the resonance peaks in the admittance spectrum. The improved analytical model can be a useful tool for optimizing the design of Smart Probes for monitoring purpose.

[1]  Suresh Bhalla,et al.  Monitoring early hydration of reinforced concrete structures using structural parameters identified by piezo sensors via electromechanical impedance technique , 2018 .

[2]  Chee Kiong Soh,et al.  A novel electromechanical impedance–based model for strength development monitoring of cementitious materials , 2018 .

[3]  Craig A. Rogers,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems — Determination of the Actuator Power Consumption and System Energy Transfer , 1994 .

[4]  Chee Kiong Soh,et al.  Damage detction and characterization using EMI technique under varying axial load , 2013 .

[5]  C. Yun,et al.  Piezoelectric sensor based nondestructive active monitoring of strength gain in concrete , 2008 .

[6]  Chee Kiong Soh,et al.  Three-Dimensional Electromechanical Impedance Model. I: Formulation of Directional Sum Impedance , 2007 .

[7]  Suresh Bhalla,et al.  Structural Health Monitoring by Piezo-Impedance Transducers. I: Modeling , 2004 .

[8]  Gangbing Song,et al.  Underwater pipeline impact localization using piezoceramic transducers , 2017 .

[9]  Venu Gopal Madhav Annamdas,et al.  Electromechanical impedance of piezoelectric transducers for monitoring metallic and non-metallic structures: A review of wired, wireless and energy-harvesting methods , 2013 .

[10]  J. H. Bungey,et al.  Testing concrete in structures , 1989 .

[11]  Xin Cheng,et al.  Assessment of corrosion of reinforcing steel bars in concrete using embedded piezoelectric transducers based on ultrasonic wave , 2017 .

[12]  V. M. Malhotra,et al.  CRC Handbook on Nondestructive Testing of Concrete , 1990 .

[13]  Chee Kiong Soh,et al.  Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique , 2011 .

[14]  Chee Kiong Soh,et al.  A Reusable PZT Transducer for Monitoring Initial Hydration and Structural Health of Concrete , 2010, Sensors.

[15]  Hongping Zhu,et al.  Embedded 3D electromechanical impedance model for strength monitoring of concrete using a PZT transducer , 2014 .

[16]  Craig A. Rogers,et al.  An Impedance Method for Dynamic Analysis of Active Material Systems , 1997 .

[17]  Xin Feng,et al.  Crack detection in pipelines using multiple electromechanical impedance sensors , 2017 .

[18]  W. D. Kovacs,et al.  An Introduction to Geotechnical Engineering , 1981 .

[19]  Rudy Tawie,et al.  Monitoring the strength development in concrete by EMI sensing technique , 2010 .

[20]  Stephen P. Timoshenko,et al.  Vibration problems in engineering , 1928 .

[21]  Daniel J. Inman,et al.  IMPEDANCE-BASED HEALTH MONITORING OF CIVIL STRUCTURAL COMPONENTS , 2000 .

[22]  Chee Kiong Soh,et al.  Non-destructive concrete strength evaluation using smart piezoelectric transducer—a comparative study , 2016 .

[23]  Anil K. Chopra,et al.  Dynamics of Structures: Theory and Applications to Earthquake Engineering , 1995 .

[24]  Guoliang Huang,et al.  On the study of surface wave propagation in concrete structures using a piezoelectric actuator/sensor system , 2008 .

[25]  Gangbing Song,et al.  Concrete structural health monitoring using embedded piezoceramic transducers , 2007 .

[26]  Vaibhav,et al.  Non-destructive Strength Evaluation of Fly Ash Based Geopolymer Concrete Using Piezo Sensors☆ , 2016 .

[27]  Chung Bang Yun,et al.  Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques , 2006 .

[28]  Chee Kiong Soh,et al.  Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing , 2017 .

[29]  Victor Giurgiutiu,et al.  Characterization of Piezoelectric Wafer Active Sensors , 2000 .

[30]  Suresh Bhalla,et al.  Calibration of piezo-impedance transducers for strength prediction and damage assessment of concrete , 2005 .

[31]  Xiaohui Lin,et al.  Crack detection in plastic pipe using piezoelectric transducers based on nonlinear ultrasonic modulation , 2017 .

[32]  Rudy Tawie,et al.  Characterization of cement-based materials using a reusable piezoelectric impedance-based sensor , 2011 .

[33]  Chee Kiong Soh,et al.  Towards more accurate numerical modeling of impedance based high frequency harmonic vibration , 2014 .

[34]  Sung Woo Shin,et al.  Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patches , 2009 .

[35]  R. Cook,et al.  Advanced Mechanics of Materials , 1985 .

[36]  Chee Kiong Soh,et al.  Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: II. Numerical verification , 2008 .

[37]  Chee Kiong Soh,et al.  An electromechanical impedance model of a piezoceramic transducer-structure in the presence of thick adhesive bonding , 2007 .