A Review of X-Ray Flow Visualization With Applications to Multiphase Flows

Flow visualization and characterization of multiphase flows have been the quest of many fluid mechanicians. The process is fairly straight forward only when there is good optical access (i.e., the vessel is not opaque or there are appropriate viewing ports) and the flow is transparent, implying a very low volume fraction of the dispersed phase; however, when optical access is not good or the fluid is opaque, alternative methods must be developed. Several different noninvasive visualization tools have been developed to provide high-quality qualitative and quantitative data of various multiphase flow characteristics, and overviews of these methods have appeared in the literature. X-ray imaging is one family of noninvasive measurement techniques used extensively for product testing and evaluation of static objects with complex structures. X-rays can also be used to visualize and characterize multiphase flows. This paper provides a review of the current status of X-ray flow visualization and details various X-ray flow visualization methods that can provide qualitative and quantitative information about the characteristics of complex multiphase flows. Disciplines Complex Fluids | Engineering | Mechanical Engineering | Thermodynamics Comments This article is from Journal of Fluids Engineering 133 (2011): 074001, doi:10.1115/1.4004367. Posted with permission. This article is available at Iowa State University Digital Repository: http://lib.dr.iastate.edu/me_pubs/20 A Review of X-Ray Flow Visualization With Applications to Multiphase Flows

[1]  Ashfaq Shaikh,et al.  Characterization of the hydrodynamic flow regime in bubble columns via computed tomography , 2005 .

[2]  C E Ravin,et al.  Principles of digital radiography with large-area, electronically readable detectors: a review of the basics. , 1999, Radiology.

[3]  Edward Raymond Doering.  Three-dimensional flaw reconstruction using a real-time X-ray imaging system , 1992 .

[4]  Theodore E. Farrington.  Soft x-ray imaging can be used to assess sheet formation and quality , 1988 .

[5]  Ian Hulme,et al.  Determination of bubble diameter and axial velocity for a polyethylene fluidized bed using X-ray fluoroscopy , 2004 .

[6]  Lynn F. Gladden,et al.  The nature of the flow just above the perforated plate distributor of a gas-fluidised bed, as imaged using magnetic resonance , 2006 .

[7]  K. Suzuki,et al.  Void fraction estimation within rod bundles based on three-fluid model and comparison with x-ray CT void data , 1990 .

[8]  T. Heindel,et al.  Developing X-Ray Particle Tracking Velocimetry for Applications in Fluidized Beds , 2008 .

[9]  Shinichi Morooka,et al.  Experimental study on void fraction in a simulated BWR fuel assembly (evaluation of cross-sectional averaged void fraction) , 1989 .

[10]  R. B. Eldridge,et al.  Investigation of X-ray imaging of vapor–liquid contactors. 1. Studies involving stationary objects and a simple flow system , 2004 .

[11]  Geoffrey F. Hewitt,et al.  Development of an X-ray computed tomography (CT) system with sparse sources: application to three-phase pipe flow visualization , 2005 .

[12]  Fredrik Forsberg,et al.  Measurement of granular flow in a silo using Digital Speckle Radiography , 2004 .

[13]  N. Ramachandran,et al.  Application of stereoscopic tracking velocimetry for experimental and numerical investigation of directional solidification , 2006 .

[14]  S. Simons,et al.  Experimental methods in fluidization research , 1994 .

[15]  J. Selman,et al.  The fundamentals of x-ray and radium physics. 7th ed , 1961 .

[16]  R. L. Peyton,et al.  Influence of aggregate size on solute transport as measured using computed tomography , 1992 .

[17]  J. Chaouki,et al.  Flow regime transition pointers in three-phase fluidized beds inferred from a solid tracer trajectory , 2006 .

[18]  G. L. Gore,et al.  Radioactive Tracer Techniques , 1956 .

[19]  H. Norman G. Allen.  Ex Opera Et Industria , 1965 .

[20]  J. D. Lindsay,et al.  Flash X-ray visualization of multiphase flow during impulse drying , 1989 .

[21]  Faïçal Larachi,et al.  Non-invasive monitoring of multiphase flows , 1997 .

[22]  R. F. Mudde,et al.  Time-Resolved γ-Densitometry Imaging within Fluidized Beds , 2005 .

[23]  Richard A Williams,et al.  Process tomography: a European innovation and its applications , 1996 .

[24]  X-Ray Particle Tracking of Dense Particle Motion in a Vibration-Excited Granular Bed , 2010 .

[25]  Jiang Hsieh,et al.  Computed Tomography: Principles, Design, Artifacts, and Recent Advances, Fourth Edition , 2022 .

[26]  Radioactive Tracer Techniques , 1999 .

[27]  R. Fox,et al.  CFD Modeling of Cold-Flow Fluidized Beds and Validation with X-ray Computed Tomography , 2008 .

[28]  Lynn F. Gladden,et al.  Magnetic Resonance Imaging of fluidized beds , 2008 .

[29]  Sailesh Kumar,et al.  A γ-ray tomographic scanner for imaging voidage distribution in two-phase flow systems , 1995 .

[30]  Theodore J. Heindel,et al.  X-ray Flow Visualization of a Circular Hydraulic Jump , 2009 .

[31]  Liang-Shih Fan,et al.  Dynamics of spiral bubble plume motion in the entrance region of bubble columns and three-phase fluidized beds using 3D ECT , 2005 .

[32]  Guk-Bae Kim,et al.  Velocity field measurements of blood flows using a synchrotron x-ray imaging technique , 2004, SPIE BiOS.

[33]  P. Jenneson,et al.  In situ x-ray imaging of nanoparticle agglomeration in fluidized beds , 2006 .

[34]  Nicolas Kalogerakis,et al.  Quantification of channelling in polyethylene resin fluid beds using X-ray computer assisted tomography (CAT) , 1997 .

[35]  G. Hewitt,et al.  Studies of Two-Phase Flow Patterns by Simultaneous X-Ray and Flash Photography , 1969 .

[36]  S. B. Kumar,et al.  Computer assisted gamma and X-ray tomography: Applications to multiphase flow systems , 1997 .

[37]  Theodore E. Farrington.  Flash X-ray imaging of kraft black liquor sprays , 1987 .

[39]  The effect of fibre type on bubble size , 2000 .

[40]  Theodore J. Heindel,et al.  The effect of fiber consistency on bubble size , 1999 .

[41]  Koji Okamoto,et al.  Measurement technique on the diffusion coefficient of powder flow in a screw feeder by X-ray visualization , 2008 .

[42]  Keiichi Hori,et al.  Cross-sectional void fraction distribution measurements in a vertical annulus two-phase flow by high speed X-ray computed tomography and real-time neutron radiography techniques , 1999 .

[43]  Steven L. Ceccio,et al.  A review of electrical impedance techniques for the measurement of multiphase flows , 1991 .

[44]  F. Battaglia,et al.  Visualizing Cold-Flow Fluidized Beds With X-Rays , 2007 .

[45]  Uwe Hampel,et al.  Dual-plane ultrafast limited-angle electron beam x-ray tomography , 2010 .

[46]  M. Basavaraj,et al.  Local liquid holdups and hysteresis in a 2‐D packed bed using X‐ray radiography , 2005 .

[47]  Gad Hetsroni,et al.  Handbook of multiphase systems , 1982 .

[48]  R. B. Eldridge,et al.  Investigation of X-ray imaging of vapor–liquid contactors. 2. Experiments and simulations of flows in an air–water contactor , 2004 .

[49]  Kaaron Koch.  THE FUNDAMENTALS OF X-RAY AND RADIUM PHYSICS , 1978 .

[50]  Apostolos Kantzas,et al.  Dynamic Flow Behavior Measurements in Gas-Solid Fluidized Beds Using Different Non-Intrusive Techniques and Polyethylene Powder , 2007 .

[51]  J. Chaouki,et al.  Noninvasive Tomographic and Velocimetric Monitoring of Multiphase Flows , 1997 .

[52]  T. Heindel,et al.  X-Ray Particle Tracking Velocimetry in Fluidized Beds , 2009 .

[53]  J. Bouma,et al.  Computed tomography as a tool for non-destructive analysis of flow patterns in macroporous clay soils. , 1995 .

[54]  G. B. Smith,et al.  X-ray imaging of slurry bubble column reactors : the effects of system pressure and scale , 1995 .

[55]  Uwe Hampel,et al.  Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography , 2008 .

[56]  Liang-Shih Fan,et al.  ECT Studies of Gas−Solid Fluidized Beds of Different Diameters , 2005 .

[57]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[58]  J. Bloch,et al.  Contribution of synchrotron X-ray holotomography to the understanding of liquid distribution in a medium during liquid aerosol filtration , 2011 .

[59]  Joseph N. Gray,et al.  Visualizing Fluid Flows With X-Rays , 2007 .

[60]  T. Heindel.  Bubble size measurements in a quiescent fiber suspension , 1998 .

[61]  S. L. Wellington,et al.  X-ray computerized tomography , 1987 .

[62]  Liang-Shih Fan,et al.  9 – Industrial Applications of Three-Phase Fluidization Systems , 1998 .

[63]  I. Tanasawa,et al.  Study on silicon melt convection during the RF-FZ crystal growth process: I. experimental flow visualization , 1999 .

[64]  Milorad P. Dudukovic,et al.  Multiphase reactors – revisited , 1999 .

[65]  Yong Jin,et al.  A novel X-ray computed tomography method for fast measurement of multiphase flow , 2007 .

[66]  Liang-Shih Fan,et al.  Imaging the Choking Transition in Gas−Solid Risers Using Electrical Capacitance Tomography , 2006 .

[67]  Dominique Toye,et al.  Possibilities and Limits of Application of Electrical Resistance Tomography in Hydrodynamics of Bubble Columns , 2008 .

[68]  A. Kantzas,et al.  X-Ray Fluoroscopy Measurements and CFD Simulation of Hydrodynamics in a Two Dimensional Gas-Solids Fluidized Bed , 2007 .

[69]  F. Battaglia,et al.  Modeling a Biomass Fluidizing Bed With Side Port Air Injection , 2009 .

[70]  F. Battaglia,et al.  CFD Modeling and X-Ray Imaging of Biomass in a Fluidized Bed , 2009 .

[71]  F. Garcia-Nocetti,et al.  Visualisation of gas–oil two-phase flows in pressurised pipes using electrical capacitance tomography , 2005 .

[72]  M. Duduković,et al.  Hydrodynamics of slurry bubble column during dimethyl ether (DME) synthesis : Gas-liquid recirculation model and radioactive tracer studies , 2006 .

[73]  Steven L. Ceccio,et al.  Validation of Electrical-Impedance Tomography for Measurements of Material Distribution in Two-Phase Flows , 2000 .

[74]  Yong Yan,et al.  Appraisal of radiometric techniques to determine absolute solids fraction in pneumatic suspensions of particulate solids , 2000 .

[75]  T. Heindel,et al.  Developing Tracer Particles for X-Ray Particle Tracking Velocimetry , 2011 .

[76]  P. N. Rowe,et al.  The bubbling behaviour of fine powders when fluidised , 1976 .

[77]  Ion Tiseanu,et al.  Comparison between wire-mesh sensor and ultra-fast X-ray tomograph for an air–water flow in a vertical pipe , 2005 .

[78]  Dominique Toye,et al.  Analysis of gas holdup in bubble columns with non-Newtonian fluid using electrical resistance tomography and dynamic gas disengagement technique , 2005 .

[79]  Wuqiang Yang,et al.  Tomography for multi-phase flow measurement in the oil industry , 2005 .

[80]  R. Fox,et al.  Experimental validation of CFD simulations of a lab‐scale fluidized‐bed reactor with and without side‐gas injection , 2010 .

[81]  Frikkie de Beer,et al.  Three-dimensional analysis of trickle flow hydrodynamics: Computed tomography image acquisition and processing , 2007 .

[82]  J. Yates,et al.  X-Ray Analysis of Fluidized Beds and Other Multiphase Systems , 2002 .

[83]  Robert F. Mudde,et al.  Gravity-driven bubbly flows , 2005 .

[84]  M. Al-Dahhan,et al.  Phase Distribution in a High Pressure Slurry Bubble Column via a Single Source Computed Tomography , 2008 .

[85]  W. Warsito,et al.  Analysis of distributions of gas and TiO2 particles in slurry bubble column using ultrasonic computed tomography , 2001 .

[86]  U. Hampel,et al.  Evaluation of a limited angle scanned electron beam x-ray CT approach for two-phase pipe flows , 2006 .

[87]  Robert L. Powell,et al.  Experimental techniques for multiphase flows , 2008 .

[88]  S. Owens,et al.  Flow Field Visualization in Structured Packing Using Real Time X-ray Radiography , 2009 .

[89]  Jan Carmeliet,et al.  Analysis of moisture flow in porous materials using microfocus X-ray radiography , 2006 .

[90]  T. Heindel,et al.  Qualitative Observations of Dense Particle Motion in a Vibration-Excited Granular Bed , 2007 .

[91]  P. Zitha,et al.  Effect of Water Solubility on Carbon Dioxide Foam Flow in Porous Media: An X-ray Computed Tomography Study , 2008 .

[92]  Xiaodong Jia,et al.  Combining X-ray microtomography with computer simulation for analysis of granular and porous materials , 2010 .

[93]  Avinash C. Kak,et al.  Principles of computerized tomographic imaging , 2001, Classics in applied mathematics.

[94]  Dominique Toye,et al.  Local measurements of void fraction and liquid holdup in packed columns using X-ray computed tomography 1 This contribution is dedicated to the remembrance of Professor Jaques Villermaux. 1 , 1998 .

[95]  Yassir Makkawi,et al.  Electrical capacitance tomography for conventional fluidized bed measurements - remarks on the measuring technique , 2004 .

[96]  Joseph N. Gray,et al.  Using X-Rays for Multiphase Flow Visualization , 2005 .

[97]  E. T. White,et al.  Flow visualisation study in porous media using X-rays , 1997 .

[98]  Naoki Ichikawa,et al.  Observation of 3-D Structure of Bubbles in a Fluidized Catalyst Bed , 2008 .

[99]  Ikeda Takashi,et al.  Preliminary Study on Application of X-Ray CT Scanner to Measurement of Void Fractions in Steady State Two-Phase Flows , 1983 .

[100]  M. E. Kipp,et al.  Experimental and computational simulation of the high velocity impact of copper spheres on steel plates , 1994 .

[101]  R. F. Mudde,et al.  Bubbles in a fluidized bed: A fast X‐ray scanner , 2011 .

[102]  Theodore J. Heindel.  Bubble Size in a Cocurrent Fiber Slurry , 2002 .

[103]  Joseph N. Gray,et al.  X-ray computed tomography in large bubble columns , 2005 .

[104]  M. Stampanoni,et al.  Multiphase flow visualization in microchannels using x-ray tomographic microscopy (xtm) , 2005 .

[105]  K. Okamoto,et al.  Measurement of powder flow in a screw feeder by x-ray penetration image analysis , 2006 .

[106]  Theodore E. Farrington.  A more fundamental approach to the problem of high consistency forming , 1986 .

[107]  J. Chaouki,et al.  Verification of fluidized bed electrical capacitance tomography measurements with a fibre optic probe , 2003 .

[108]  Milorad P. Dudukovic.  Relevance of Multiphase Reaction Engineering to Modern Technological Challenges , 2007 .

[109]  F. Battaglia,et al.  A Validation Study for the Hydrodynamics of Biomass in a Fluidized Bed , 2008 .

[110]  Yassir Makkawi,et al.  Fluidization regimes in a conventional fluidized bed characterized by means of electrical capacitance tomography , 2002 .

[111]  Ashfaq Shaikh,et al.  Solids flow mapping in a high pressure slurry bubble column , 2005 .

[112]  Z. Olujic,et al.  Liquid distribution images on structured packing by X‐ray computed tomography , 2001 .

[113]  N. Triantafillopoulos,et al.  Flash x-ray radiography techniques for visualizing coating flows , 1988 .

[114]  Ying Zheng,et al.  Simultaneous measurement of gas and solid holdups in multiphase systems using ultrasonic technique , 2004 .

[115]  K. Ng,et al.  Liquid distribution in trickle-beds. An experimental study using computer-assisted tomography , 1991 .

[116]  Karl-Ernst Wirth,et al.  X-ray computer tomography — potential and limitation for the measurement of local solids distribution in circulating fluidized beds , 2000 .

[117]  Ying Zheng,et al.  Application of Ultrasonic Technique in Multiphase Flows , 2004 .

[118]  G. Kim,et al.  X-ray particle image velocimetry for measuring quantitative flow information inside opaque objects , 2003 .

[119]  Richard A Williams,et al.  Process tomography : principles, techniques and applications , 1995 .

[120]  K. Hori,et al.  Development of ultra-fast X-ray computed tomography scanner system , 1997, 1997 IEEE Nuclear Science Symposium Conference Record.

[121]  Liang-Shih Fan,et al.  Electrical Capacitance Tomography − A Perspective , 2008 .

[122]  Apostolos Kantzas,et al.  Computation of holdups in fluidized and trickle beds by computer-assisted tomography , 1994 .

[123]  Vivek V. Ranade,et al.  Computational fluid dynamics for designing process equipment: Expectations, current status, and path forward , 2003 .

[124]  E. W. Grohse.  Analysis of gas-fluidized solid systems by x-ray absorption , 1955 .

[125]  Liang-Shih Fan,et al.  ECT imaging of three-phase fluidized bed based on three-phase capacitance model , 2003 .

[126]  P. Rowe,et al.  The division of gas between bubble and interstitial phases in fluidised beds of fine powders , 1978 .

[127]  Steven L. Ceccio,et al.  Quantitative measurement of solids distribution in gas–solid riser flows using electrical impedance tomography and gamma densitometry tomography , 2006 .

[128]  Yuri A. Sergeev,et al.  EXPERIMENTAL OBSERVATIONS OF VOIDAGE DISTRIBUTION AROUND BUBBLES IN A FLUIDIZED BED , 1994 .

[129]  R. Mudde,et al.  Time-resolved X-ray tomography of a fluidized bed , 2010 .

[130]  Theodore J. Heindel,et al.  The repeatability and uniformity of 3D fluidized beds , 2011 .

[131]  Sankaran Sundaresan,et al.  Modeling the hydrodynamics of multiphase flow reactors: Current status and challenges , 2000 .

[132]  Hiroto Habu,et al.  X‐Ray Visualization Measurement of Slurry Flow in Solid Propellant Casting , 2007 .

[133]  R. Eldridge,et al.  The experimental application of X-ray tomography to a vapor–liquid contactor , 2001 .

[134]  K. Kakimoto,et al.  Direct observation by X-ray radiography of convection of molten silicon in the Czochralski growth method , 1988 .

[135]  Jason J. Ford,et al.  X-ray computed tomography of a gas-sparged stirred-tank reactor , 2008 .

[136]  Horst-Michael Prasser,et al.  Novel experimental measuring techniques required to provide data for CFD validation , 2008 .

[137]  Marko Hočevar,et al.  Local Measurements in Cavitating Flow by Ultra-Fast X-Ray Imaging , 2009 .

[139]  Liang-Shih Fan,et al.  3D‐ECT Velocimetry for Flow Structure Quantification of Gas‐Liquid‐Solid Fluidized Beds , 2008 .

[140]  Kamel Fezzaa,et al.  Particle tracking velocimetry using fast x-ray phase-contrast imaging , 2007 .

[141]  Klaus Affeld,et al.  X-ray-based assessment of the three-dimensional velocity of the liquid phase in a bubble column , 2001 .

[142]  Theodore J. Heindel.  Gas flow regime changes in a bubble column filled with a fibre suspension , 2000 .

[143]  Chongyoup Kim,et al.  Simulation of particle migration in free‐surface flows , 2010 .

[144]  R. Mudde.  Double X-ray Tomography of a Bubbling Fluidized Bed , 2010 .

[145]  Dominique Toye,et al.  Modelling of multiphase flow in packed beds by computer-assisted x-ray tomography , 1996 .

[146]  Keiichi Hori,et al.  Real-time cross-sectional averaged void fraction measurements in vertical annulus gas-liquid two-phase flow by neutron radiography and X-ray tomography techniques , 1996 .

[147]  Theodore J. Heindel,et al.  Flash x-ray radiography for visualizing gas flow in opaque liquid/fiber suspensions , 1997 .

[148]  E. Wellnhofer,et al.  Measurement of the local velocity of the solid phase and the local solid hold-up in a three-phase flow by X-ray based particle tracking velocimetry (XPTV) , 2003 .

[149]  Milorad P. Dudukovic,et al.  Opaque Multiphase Reactors: Experimentation, Modeling and Troubleshooting , 2000 .

[150]  J. Romero,et al.  Flash x‐ray analysis of fluidized beds , 1965 .

[151]  B. A. Bennett,et al.  Flow visualization studies of boiling at high pressure , 1965 .

[152]  Artin Afacan,et al.  Liquid holdup distribution in packed columns: gamma ray tomography and CFD simulation , 2002 .

[153]  P. N. Rowe,et al.  An x-ray study of bubbles in fluidised beds , 1997 .

[154]  E. Wellnhofer,et al.  Assessment of Flow Structures in Bubble Columns by X-ray Based Particle Tracking Velocimetry , 2001 .

[155]  Robert F. Mudde,et al.  The 12th International Conference on Fluidization-New Horizons in Fluidization Engineering , 2016 .

[156]  J. Pate.  Introduction to Optics , 1937, Nature.

[157]  M. Duduković,et al.  Flow mapping in bubble columns using CARPT , 1990 .

[158]  Yi Cheng,et al.  Measurement of Axisymmetric Two-Phase Flows by an Improved X-ray-Computed Tomography Technique , 2008 .

[159]  Development of an ultrafast X-ray computed tomography scanner system : Application for measurement of instantaneous void distribution of gas-liquid two-phase flow , 2000 .

[160]  Christopher F. Powell,et al.  Nozzle Geometry and Injection Duration Effects on Diesel Sprays Measured by X-Ray Radiography , 2008 .

[161]  T. Heindel,et al.  Local time-averaged gas holdup in a fluidized bed with side air injection using X-ray computed tomography , 2009 .

[162]  Uwe Hampel,et al.  Ultrafast cross‐sectional imaging of gas‐particle flow in a fluidized bed , 2009 .

[164]  Nicolas Kalogerakis,et al.  Monitoring the fluidization characteristics of polyolefin resins using X-ray Computer Assisted Tomography scanning , 1996 .

[165]  Robert Stanton,et al.  Radiological Imaging: The Theory of Image Formation, Detection, and Processing , 1983 .

[166]  W. Nicol,et al.  Trickle flow distribution and stability by X-ray radiography , 2007 .

[167]  Gabriel Wild,et al.  Measuring Techniques in Gas—Liquid and Gas—Liquid—Solid Reactors , 2003 .

[168]  Joseph N. Gray,et al.  An X-ray system for visualizing fluid flows , 2008 .

[169]  Alex C. Hoffmann,et al.  Positron emission tomography applied to fluidization engineering , 2008 .

[170]  J. Killough,et al.  Computed tomography imaging of air sparging in porous media , 1996 .