Proper-Orthogonal-Decomposition-Based Buckling Analysis and Optimization of Hybrid Fiber Composite Shells

Composite cylindrical shells have been widely used in the fuel tanks of launch vehicles. To reduce the material cost of carbon-fiber-reinforced polymer shells, hybrid fiber composite shells compose...

[1]  J. Naveen,et al.  Hybrid fiber reinforced polymer composites – a review , 2014 .

[2]  Y. Mai,et al.  On the elastic modulus of hybrid particle/short-fiber/polymer composites , 2002 .

[3]  Bo Wang,et al.  Extended multiscale finite element method for small-deflection analysis of thin composite plates with aperiodic microstructure characteristics , 2017 .

[4]  R. Macneal.  A hybrid method of component mode synthesis , 1971 .

[5]  Bhavani V. Sankar,et al.  Mechanical properties of hybrid composites using finite element method based micromechanics , 2014 .

[6]  Jeffrey P. Thomas,et al.  Proper Orthogonal Decomposition Technique for Transonic Unsteady Aerodynamic Flows , 2000 .

[7]  Bin Wang,et al.  Free Vibration Analysis of Beam-Type Structures Based on Novel Reduced-Order Model , 2017 .

[8]  T. Q. Bui,et al.  An effective meshfree reproducing kernel method for buckling analysis of cylindrical shells with and without cutouts , 2017 .

[9]  M. Hyer,et al.  Postbuckling Behavior of Segmented Circular Composite Cylinders , 2004 .

[10]  H. P. Lee,et al.  PROPER ORTHOGONAL DECOMPOSITION AND ITS APPLICATIONS—PART I: THEORY , 2002 .

[11]  Hamid Zahrouni,et al.  A model reduction method for the post-buckling analysis of cellular microstructures , 2007 .

[12]  Xiao-Wei Gao,et al.  A Proper Orthogonal Decomposition Analysis Method for Multimedia Heat Conduction Problems , 2016 .

[13]  Yu Sun,et al.  Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method , 2015 .

[14]  K. P. Rao,et al.  Design, Analysis, Fabrication and Testing of CFRP with CNF Composite Cylinder for Space Applications , 2015 .

[15]  R. Guyan.  Reduction of stiffness and mass matrices , 1965 .

[16]  Lawrence Sirovich,et al.  The use of the Karhunen-Loegve procedure for the calculation of linear Eigenfunctions , 1991 .

[17]  M. Farshad,et al.  Buckling loads of CFRP composite cylinders under combined axial and torsion loading: experiments and computations , 2001 .

[18]  Richard Degenhardt,et al.  Investigations on imperfection sensitivity and deduction of improved knock-down factors for unstiffened CFRP cylindrical shells , 2010 .

[19]  Yunlong Ma,et al.  Grid-pattern optimization framework of novel hierarchical stiffened shells allowing for imperfection sensitivity , 2017 .

[20]  Sharad Shrivastava,et al.  A review on mechanical behavior of natural fiber based hybrid composites , 2012 .

[21]  Richard Degenhardt,et al.  EXPERIMENTS ON BUCKLING AND POSTBUCKLING OF THIN-WALLED CFRP STRUCTURES USING ADVANCED MEASUREMENT SYSTEMS , 2007 .

[22]  Ashish Srivastava,et al.  Elastic properties of CNT- and graphene-reinforced nanocomposites using RVE , 2016 .

[23]  Chiara Bisagni,et al.  An experimental investigation into the buckling and post-buckling of CFRP shells under combined axial and torsion loading , 2003 .

[24]  K. Soldatos,et al.  A comparison of some shell theories used for the dynamic analysis of cross-ply laminated circular cylindrical panels , 1984 .

[25]  Mark W. Hilburger,et al.  Shell Buckling Design Criteria Based on Manufacturing Imperfection Signatures , 2003 .

[26]  Constantinos Soutis.  Carbon fiber reinforced plastics in aircraft construction , 2005 .

[27]  S. Mohammadi,et al.  Eigenvalue buckling analysis of cracked functionally graded cylindrical shells in the framework of the extended finite element method , 2017 .

[28]  Bryan Glaz,et al.  Reduced-Order Nonlinear Unsteady Aerodynamic Modeling Using a Surrogate-Based Recurrence Framework , 2010 .

[29]  Mark W. Hilburger,et al.  Response of composite shells with cutouts to internal pressure and compression loads , 1999 .

[30]  A. Waas,et al.  Compression Response of 2D Braided Textile Composites: Single Cell and Multiple Cell Micromechanics Based Strength Predictions , 2008 .

[31]  P. Holmes,et al.  The Proper Orthogonal Decomposition in the Analysis of Turbulent Flows , 1993 .

[32]  Marco Amabili,et al.  Chaotic vibrations of circular cylindrical shells: Galerkin versus reduced-order models via the proper orthogonal decomposition method , 2006 .

[33]  Venkatesh Agaram,et al.  Analysis of 2D triaxial flat braided textile composites , 2003 .

[34]  Christian Soize,et al.  Post-buckling nonlinear static and dynamical analyses of uncertain cylindrical shells and experimental validation , 2014 .

[35]  A. Elayaperumal,et al.  Prediction of tensile properties of hybrid-natural fiber composites , 2012 .

[36]  B. Irons.  Structural eigenvalue problems - elimination of unwanted variables , 1965 .

[37]  J. Hutchinson,et al.  Buckling of Bars, Plates and Shells , 1975 .

[38]  Bo Wang,et al.  Numerical-based smeared stiffener method for global buckling analysis of grid-stiffened composite cylindrical shells , 2016 .

[39]  Bo Wang,et al.  A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells , 2017, International Journal of Solids and Structures.

[40]  Julia A. King,et al.  Mechanical properties of graphene nanoplatelet/carbon fiber/epoxy hybrid composites: multiscale modeling and experiments , 2015 .

[41]  G. Kerschen,et al.  The Method of Proper Orthogonal Decomposition for Dynamical Characterization and Order Reduction of Mechanical Systems: An Overview , 2005 .

[42]  Z. Bai.  Krylov subspace techniques for reduced-order modeling of large-scale dynamical systems , 2002 .

[43]  Wenbin Yu,et al.  A Unified Theory for Constitutive Modeling of Composites , 2016 .

[44]  K. Lam,et al.  Analysis of rotating laminated cylindrical shells by different thin shell theories , 1995 .

[45]  Earl H. Dowell,et al.  Proper Orthogonal Decomposition Reduced-Order Model for Nonlinear Aeroelastic Oscillations , 2014 .

[46]  Wook-Jin Lee,et al.  Finite element analysis of compressive behavior of hybrid short fiber/particle/mg metal matrix composites using RVE model , 2015, Metals and Materials International.

[47]  Raimund Rolfes,et al.  Robust design of composite cylindrical shells under axial compression — Simulation and validation , 2008 .

[48]  L. C. Pardini,et al.  A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures , 2006 .

[49]  I. Ghasemi,et al.  Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites , 2007 .