High-temperature mechanical behaviour of flaw tolerant alumina–zirconia multilayered ceramics

[1]  A. Sanchez-Herencia,et al.  Processing optimisation and fracture behaviour of layered ceramic composites with highly compressive layers , 2007 .

[2]  C. Baudín,et al.  Flaw Tolerant Ceramic Laminates with Negligible Residual Stresses between Layers , 2007 .

[3]  A. Sanchez-Herencia,et al.  Residual stresses, strength and toughness of laminates with different layer thickness ratios , 2006 .

[4]  R. Cook.  Toughening of a Cordierite Glass–Ceramic by Compressive Surface Layers , 2005 .

[5]  V. Sglavo,et al.  Tailored Residual Stresses in High Reliability Alumina‐Mullite Ceramic Laminates , 2005 .

[6]  R. Bermejo,et al.  Thermal Shock Behavior of an Al2O3/ZrO2 Multilayered Ceramic with Residual Stresses due to Phase Transformations , 2005 .

[7]  F. Lange,et al.  Crack Bifurcation at the Surface of Laminar Ceramics That Exhibit a Threshold Strength , 2005 .

[8]  E. Rybacki,et al.  Mechanical and microstructural characterization of calcium aluminosilicate (CAS) and SiO2/CAS composites deformed at high temperature and high pressure , 2005 .

[9]  C. Baudín,et al.  Design and processing of Al2O3–Al2TiO5 layered structures , 2005 .

[10]  A. Sanchez-Herencia,et al.  Microstructure and High‐Temperature Mechanical Behavior of Alumina/Alumina–Yttria‐Stabilized Tetragonal Zirconia Multilayer Composites , 2005 .

[11]  M. Lewis,et al.  Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers , 2005 .

[12]  F. Lange,et al.  ZrO2/ZrO2 Layered Composites for Crack Bifurcation , 2004 .

[13]  Guo‐Jun Zhang,et al.  High-Temperature Multilayer Composites with Superplastic Interlayers , 2004 .

[14]  J. Halloran,et al.  Elevated‐Temperature Mechanical Properties of Silicon Nitride/Boron Nitride Fibrous Monolithic Ceramics , 2004 .

[15]  N. Orlovskaya,et al.  Crack arrest in Si3N4-based layered composites with residual stress , 2004 .

[16]  Desiderio Kovar,et al.  High-temperature deformation of Al2O3/Y-TZP particulate laminates , 2004 .

[17]  G. Tan,et al.  Effect of porous interlayers on crack deflection in ceramic laminates , 2004 .

[18]  B. Sheldon,et al.  A Layered Alumina Composite Tested at High Temperature in Air , 2000 .

[19]  A. Domínguez-Rodríguez,et al.  Effect of layer interfaces on the high-temperature mechanical properties of alumina/zirconia laminate composites , 2000 .

[20]  F. Lange,et al.  Bifurcation in alumina plates produced by a phase transformation in central, alumina/zirconia thin layers , 2000 .

[21]  Yang,et al.  Direct adjustment procedure for weight functions of graded materials , 2000 .

[22]  D. Munz,et al.  Applicability of the extended Petroski–Achenbach weight function procedure to graded materials , 2000 .

[23]  Rao,et al.  Laminar Ceramics That Exhibit a Threshold Strength. , 1999, Science.

[24]  Green,et al.  Crack Arrest and Multiple Cracking in Glass Through the Use of Designed Residual Stress Profiles. , 1999, Science.

[25]  E. Roncari,et al.  High temperature plastic deformation of multilayered YTZP/ZTA composites obtained by tape casting , 1998 .

[26]  W. Clegg.  Design of ceramic laminates for structural applications , 1998 .

[27]  B. Bollen,et al.  Impulse excitation apparatus to measure resonant frequencies, elastic moduli, and internal friction at room and high temperature , 1997 .

[28]  H. M. Chan.  LAYERED CERAMICS: Processing and Mechanical Behavior , 1997 .

[29]  M. Oechsner,et al.  Crack Bifurcation in Laminar Ceramic Composites , 1996 .

[30]  A. Evans,et al.  Crack deflection at an interface between dissimilar elastic materials: Role of residual stresses , 1994 .

[31]  Linghui He,et al.  A linear theory of laminated shells accounting for continuity of displacements and transverse shear stresses at layer interfaces , 1994 .

[32]  J. E. Ritter,et al.  Erosion damage and strength degradation of zirconia-toughened alumina , 1988 .

[33]  B. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method , 1981 .

[34]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[35]  J. Dundurs.  Discussion: ``Edge-Bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading'' (Bogy, D. B., 1968, ASME J. Appl. Mech., 35, pp. 460-466) , 1969 .

[36]  C. Smith,et al.  Calculated High‐Temperature Elastic Constants for Zero Porosity Monoclinic Zirconia , 1964 .

[37]  J. B. Wachtman,et al.  Young's Modulus of Various Refractory Materials as a Function of Temperature , 1959 .

[38]  A. Sanchez-Herencia,et al.  Threshold strength evaluation on an Al2O3–ZrO2 multilayered system , 2007 .

[39]  J. Gurauskis,et al.  Alumina–zirconia layered ceramics fabricated by stacking water processed green ceramic tapes , 2007 .

[40]  G. D. Portu,et al.  Effective fracture toughness in Al2O3–Al2O3/ZrO2 laminates , 2007 .

[41]  C. Baudín,et al.  Layered materials with high strength and flaw tolerance based on alumina and aluminium titanate , 2007 .

[42]  R. Danzer,et al.  Prediction of the fracture toughness of a ceramic multilayer composite – Modeling and experiments , 2007 .

[43]  A. Sanchez-Herencia,et al.  Fracture behaviour of an Al2O3-ZrO2 multi-layered ceramic with residual stresses due to phase transformations , 2006 .

[44]  Rolf W. Steinbrech,et al.  Mechanical properties of coated materials and multi-layered composites determined using bending methods , 2004 .

[45]  Theo Fett,et al.  Stress intensity factors and weight functions , 1997 .

[46]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[47]  John W. Hutchinson,et al.  Crack deflection at an interface between dissimilar elastic-materials , 1989 .

[48]  J. Srawley.  Wide range stress intensity factor expressions for ASTM E 399 standard fracture toughness specimens , 1976, International Journal of Fracture.

[49]  J. Dundurs,et al.  Discussion of Edge-Bonded Dissimilar Orthogonal Elastic Wedges under Normal and Shear Loading , 1969 .