Modeling pore processes for particle-resolved CFD simulations of catalytic fixed-bed reactors

Abstract The most rigorous description of catalytic fixed-bed reactors is particle-resolved CFD simulations. Pore processes can have a large effect toward reactor performance, since they limit internal mass transport. In this study, three pore models of different complexity are incorporated into the CFD software STAR-CCM+. Instantaneous diffusion, effectiveness-factor approach, and three-dimensional reaction–diffusion model are validated firstly with experimental data of CO oxidation in a stagnation-flow reactor from Karadeniz et al. (2013) . The 3D approach predicts the experiments with high accuracy over the entire temperature range followed by the computationally cheaper effectiveness-factor. In a second study, the effect of the three pore models is evaluated on a catalytic single sphere with Reynolds numbers varying between 10 and 2000. The local interplay between kinetics and transport phenomena are quantified. For all investigated cases internal mass transfer limitations are larger than external ones. This study can be applied for entire packed-bed simulations.

[1]  Anthony G. Dixon,et al.  CFD study of fluid flow and wall heat transfer in a fixed bed of spheres , 2004 .

[2]  M. Kraume,et al.  Investigating dry reforming of methane with spatial reactor profiles and particle‐resolved CFD simulations , 2016 .

[3]  Matthias Kraume,et al.  Evaluating Catalytic Fixed‐Bed Reactors for Dry Reforming of Methane with Detailed CFD , 2015 .

[4]  Vladimír Novák,et al.  Multi-scale modelling of reaction and transport in porous catalysts , 2010 .

[5]  T. Shih,et al.  A new k-ϵ eddy viscosity model for high reynolds number turbulent flows , 1995 .

[6]  O. Deutschmann,et al.  A one-dimensional modeling approach for dual-layer monolithic catalysts , 2016 .

[7]  Milorad P. Dudukovic,et al.  Frontiers in Reactor Engineering , 2009, Science.

[8]  Hua Bai,et al.  A Coupled DEM and CFD Simulation of Flow Field and Pressure Drop in Fixed Bed Reactor with Randomly Packed Catalyst Particles , 2009 .

[9]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[10]  Anthony G. Dixon,et al.  Heat Transfer in Fixed Beds at Very Low (<4) Tube-to-Particle Diameter Ratio , 1997 .

[11]  O. Deutschmann,et al.  Kinetics of hydrogen oxidation on Rh/Al2O3 catalysts studied in a stagnation-flow reactor , 2013 .

[12]  Anthony G. Dixon,et al.  Computationally efficient incorporation of microkinetics into resolved-particle CFD simulations of fixed-bed reactors , 2016, Comput. Chem. Eng..

[13]  P. Glarborg,et al.  Chemically Reacting Flow : Theory and Practice , 2003 .

[14]  Stefano Rebughini,et al.  A multiregion operator-splitting CFD approach for coupling microkinetic modeling with internal porous transport in heterogeneous catalytic reactors , 2016 .

[15]  Flow Visualizations and Transient Temperature Measurements in an Axisymmetric Impinging Jet Rapid Thermal Chemical Vapor Deposition Reactor , 2002 .

[16]  M. Kraume,et al.  Detailed numerical simulations of catalytic fixed-bed reactors: Heterogeneous dry reforming of methane , 2015 .

[17]  O. Deutschmann,et al.  Numerical modeling of stagnation-flows on porous catalytic surfaces: CO oxidation on Rh/Al2O3 , 2013 .

[18]  M. Stamatakis,et al.  A review of multiscale modeling of metal-catalyzed reactions: Mechanism development for complexity and emergent behavior , 2011 .

[19]  O. Deutschmann,et al.  Mass Transfer Effects in Stagnation Flows on a Porous Catalyst: Water-Gas-Shift Reaction Over Rh/Al2O3 , 2015 .

[20]  R. Hayes,et al.  The effect of washcoat geometry on mass transfer in monolith reactors , 2004 .

[21]  Matthias Kraume,et al.  Fluidic effects on kinetic parameter estimation in lab-scale catalysis testing – A critical evaluation based on computational fluid dynamics , 2014 .

[22]  F. H. Garner,et al.  Mass transfer from a soluble solid sphere , 1958 .

[23]  O. Deutschmann.  Computational Fluid Dynamics Simulation of Catalytic Reactors , 2008 .

[24]  Frerich J. Keil,et al.  Complexities in modeling of heterogeneous catalytic reactions , 2013, Comput. Math. Appl..

[25]  A. Dixon.  Fixed bed catalytic reactor modelling—the radial heat transfer problem , 2012 .

[26]  Anthony G. Dixon,et al.  Packed Tubular Reactor Modeling and Catalyst Design using Computational Fluid Dynamics , 2006 .

[27]  Steffen Tischer,et al.  Modeling of transport and chemistry in channel flows of automotive catalytic converters , 2010 .

[28]  Anthony G. Dixon,et al.  Systematic mesh development for 3D CFD simulation of fixed beds: Single sphere study , 2011, Comput. Chem. Eng..

[29]  R. Chhabra,et al.  A numerical study on the forced convection heat transfer from an isothermal and isoflux sphere in the steady symmetric flow regime , 2006 .