Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds.
暂无分享,去创建一个
Ahmad Baroutaji | Arun Arjunan | Chang Wang | M. Demetriou | A. Arjunan | A. Baroutaji | Chang Wang | Marios Demetriou
[1] Ryan B. Wicker,et al. Characterization of Ti–6Al–4V open cellular foams fabricated by additive manufacturing using electron beam melting , 2010 .
[2] Alexander J. Dunbar,et al. Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4V , 2017 .
[3] I. Yadroitsava,et al. Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM , 2016 .
[4] M. Shukla,et al. Lattice Modeling and CFD Simulation for Prediction of Permeability in Porous Scaffolds , 2018 .
[5] Oded Amir,et al. Topology optimization for additive manufacturing: Accounting for overhang limitations using a virtual skeleton , 2017 .
[6] P. Ma,et al. Polymeric Scaffolds for Bone Tissue Engineering , 2004, Annals of Biomedical Engineering.
[7] Patrick J Prendergast,et al. The effect of pore size on permeability and cell attachment in collagen scaffolds for tissue engineering. , 2007, Technology and health care : official journal of the European Society for Engineering and Medicine.
[8] John A Jansen,et al. The performance of human dental pulp stem cells on different three-dimensional scaffold materials. , 2006, Biomaterials.
[9] T. M. Keaveny,et al. Dependence of Intertrabecular Permeability on Flow Direction and Anatomic Site , 1999, Annals of Biomedical Engineering.
[10] Y. Xie,et al. Lattice Ti structures with low rigidity but compatible mechanical strength: Design of implant materials for trabecular bone , 2016 .
[11] D. Lacroix,et al. A dynamical study of the mechanical stimuli and tissue differentiation within a CaP scaffold based on micro-CT finite element models , 2011, Biomechanics and modeling in mechanobiology.
[12] L. Murr,et al. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[13] Sonia Mariel Vrech,et al. Advances in additive manufacturing for bone tissue engineering scaffolds. , 2019, Materials science & engineering. C, Materials for biological applications.
[14] Abdul-Ghani Olabi,et al. Application of Cellular Material in Crashworthiness Applications: An Overview , 2019, Reference Module in Materials Science and Materials Engineering.
[15] Emeka Nkenke,et al. In vivo performance of selective electron beam-melted Ti-6Al-4V structures. , 2010, Journal of biomedical materials research. Part A.
[16] Yunqing Kang,et al. Channels in a porous scaffold: a new player for vascularization. , 2018, Regenerative medicine.
[17] H. Maier,et al. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering. , 2019, Acta biomaterialia.
[18] Kaan Sahingur,et al. Performance of laser sintered Ti–6Al–4V implants with bone-inspired porosity and micro/nanoscale surface roughness in the rabbit femur , 2017, Biomedical materials.
[19] N. Kikuchi,et al. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. , 2004, Journal of biomechanics.
[20] P. Lipinski,et al. Development and mechanical characterization of porous titanium bone substitutes. , 2012, Journal of the mechanical behavior of biomedical materials.
[21] S. Lohfeld,et al. Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering , 2009, Journal of materials science. Materials in medicine.
[22] C. Sutcliffe,et al. Crush Behaviour Of Open Cellular LatticeStructures Manufactured UsingSelective Laser Melting , 2006 .
[23] S. M. Ahmadi,et al. Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials. , 2018, Journal of the mechanical behavior of biomedical materials.
[24] M. Stevens,et al. The Design and In Vivo Testing of a Locally Stiffness-Matched Porous Scaffold. , 2019, Applied materials today.
[25] M. Ashby. The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[26] Cuie Wen,et al. Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications , 2018, Acta Materialia.
[27] Filippo Berto,et al. Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting , 2017 .
[28] S. Amico,et al. Effect of carbon nanotubes addition on the mechanical and thermal properties of epoxy matrices , 2008 .
[29] Christopher Tuck,et al. Microstructure of Ti-6Al-4V produced by selective laser melting , 2012 .
[30] J. Kruth,et al. Selective laser melting of weak-textured commercially pure titanium with high strength and ductility: A study from laser power perspective , 2017 .
[31] J. Rho,et al. Anisotropy of Young's modulus of human tibial cortical bone , 2000, Medical and Biological Engineering and Computing.
[32] H Van Oosterwyck,et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. , 2012, Acta biomaterialia.
[33] F. H. Harlow,et al. A stochastic constitutive model for disordered cellular materials: Finite-strain uni-axial compression , 2006 .
[34] P. Bar-Yoseph,et al. Design, Analysis and Additive Manufacturing of Porous Structures for Biocompatible Micro-Scale Scaffolds☆ , 2013 .
[35] S. M. Ahmadi,et al. Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells. , 2014, Journal of the mechanical behavior of biomedical materials.
[36] Suihuai Yu,et al. Bionic Design, Materials and Performance of Bone Tissue Scaffolds , 2017, Materials.
[37] Xinhua Wu,et al. Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components , 2018 .
[38] Liang Hao,et al. The effect of different build orientations on the consolidation, tensile and fracture toughness properties of direct metal laser sintering Ti-6Al-4V , 2018 .
[39] M. Meskinfam. Polymer scaffolds for bone regeneration , 2017 .
[40] Radovan Hudák,et al. Influence of Build Orientation, Heat Treatment, and Laser Power on the Hardness of Ti6Al4V Manufactured Using the DMLS Process , 2017 .
[41] A. A. Zadpoor,et al. Effects of bone substitute architecture and surface properties on cell response, angiogenesis, and structure of new bone. , 2017, Journal of materials chemistry. B.
[42] J. Planell,et al. Influence of tempering temperature and time on the α′-Ti-6Al-4V martensite , 1996 .
[43] Ph. Bertrand,et al. Parametric analysis of the selective laser melting process , 2007 .
[44] E. Østby,et al. Constraint effect on the near tip stress fields due to difference in plastic work hardening for bi-material interface cracks in small scale yielding , 2001 .
[45] C. Bailey,et al. Analysis of fluid separation in microfluidic T-channels , 2012 .
[46] L. Froyen,et al. Dental root implants produced by the combined selective laser sintering/melting of titanium powders , 2002 .
[47] S. Rosso,et al. Implications of modeling approaches on the fatigue behavior of cellular solids , 2019, Additive Manufacturing.
[48] L. Bonewald. Chapter 10 – Osteocyte Biology , 2013 .
[49] Klaudio Bari,et al. Compressive performance of an arbitrary stiffness matched anatomical Ti64 implant manufactured using Direct Metal Laser Sintering , 2018, Materials & Design.
[50] R. Singer,et al. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.
[51] J. Pegues,et al. Fatigue life estimation of additive manufactured parts in the as‐built surface condition , 2019, Material Design & Processing Communications.
[52] M. Leu,et al. Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering , 2011, Biofabrication.
[53] N. Noda,et al. Relationship between Strain Rate Concentration Factor and Stress Concentration Factor for Round and flat Test Specimens , 2017, The Proceedings of Conference of Kyushu Branch.
[54] R. J. McCoy,et al. Influence of flow rate and scaffold pore size on cell behavior during mechanical stimulation in a flow perfusion bioreactor , 2012, Biotechnology and bioengineering.
[55] A. Arjunan. Acoustic absorption of passive destructive interference cavities , 2019, Materials Today Communications.
[56] M. Todea,et al. Effect of different surface treatments on bioactivity of porous titanium implants , 2019, Journal of Materials Science & Technology.
[57] I. Yadroitsev,et al. Heat transfer modelling and stability analysis of selective laser melting , 2007 .
[58] Robert Souffrant,et al. Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions. , 2013, Medical engineering & physics.
[59] Cheng Yan,et al. Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction , 2017 .
[60] Qian Tang,et al. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting. , 2019, Journal of the mechanical behavior of biomedical materials.
[61] Frank Luyten,et al. Controlled cell-seeding methodologies: a first step toward clinically relevant bone tissue engineering strategies. , 2010, Tissue engineering. Part C, Methods.
[62] G. Nicoletto. Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V , 2018 .
[63] Josep A Planell,et al. Simulation of tissue differentiation in a scaffold as a function of porosity, Young's modulus and dissolution rate: application of mechanobiological models in tissue engineering. , 2007, Biomaterials.
[64] M. D. Vlad,et al. Design and properties of 3D scaffolds for bone tissue engineering. , 2016, Acta biomaterialia.
[65] Zhenhua Liao,et al. Biomechanical Analysis of Porous Additive Manufactured Cages for Lateral Lumbar Interbody Fusion: A Finite Element Analysis. , 2017, World neurosurgery.
[66] G. Straten,et al. Darcian permeability constant as indicator for shear stresses in regular scaffold systems for tissue engineering , 2009, Biomechanics and modeling in mechanobiology.
[67] Aldo R Boccaccini,et al. Permeability evaluation of 45S5 Bioglass-based scaffolds for bone tissue engineering. , 2009, Journal of biomechanics.
[68] Paul A. Hooper,et al. The influence of laser parameters, scanning strategies and material on the fatigue strength of a stochastic porous structure , 2018, Additive Manufacturing.
[69] Amit Bandyopadhyay,et al. Surface modification of biomaterials and biomedical devices using additive manufacturing. , 2018, Acta biomaterialia.
[70] Philip J. Withers,et al. The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing , 2015 .
[71] C K Chua,et al. Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds. , 2011, Acta biomaterialia.
[72] Miguel Cervera,et al. Modeling of Microstructure Evolution of Ti6Al4V for Additive Manufacturing , 2018, Metals.
[73] Ahmad Baroutaji,et al. Acoustic Performance of Metallic Foams , 2019, Reference Module in Materials Science and Materials Engineering.
[74] Yan Hu,et al. Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes. , 2018, Journal of the mechanical behavior of biomedical materials.
[75] Y. Shin,et al. Additive manufacturing of Ti6Al4V alloy: A review , 2019, Materials & Design.
[76] H. Zreiqat,et al. Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone , 2018, Advanced healthcare materials.
[77] M. Bram,et al. Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. , 2010, Acta biomaterialia.
[78] A. Arjunan,et al. Extra low interstitial titanium based fully porous morphological bone scaffolds manufactured using selective laser melting. , 2019, Journal of the mechanical behavior of biomedical materials.
[79] Bikramjit Basu,et al. Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis. , 2017, Materials science & engineering. C, Materials for biological applications.
[80] J. Kadkhodapour,et al. Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure. , 2014, Materials science & engineering. C, Materials for biological applications.
[81] Klaudio Bari,et al. Investigation of Ti64 sheathed cellular anatomical structure as a tibia implant , 2019, Biomedical Physics & Engineering Express.
[82] O. Yeheskel,et al. Texture analysis of additively manufactured Ti-6Al-4V using neutron diffraction , 2018, Additive Manufacturing.
[83] V. Jinga,et al. Natural Polymer-Cell Bioconstructs for Bone Tissue Engineering. , 2016, Current stem cell research & therapy.
[84] T. Mower,et al. Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .
[85] Wenmiao Shu,et al. 3D bioactive composite scaffolds for bone tissue engineering , 2017, Bioactive materials.
[86] M. Preuss,et al. On the work hardening of titanium: new insights from nanoindentation , 2019, Journal of Materials Science.
[87] Chunguang Xia,et al. Xenopus laevis as a novel model to study long bone critical-size defect repair by growth factor-mediated regeneration. , 2011, Tissue engineering. Part A.
[88] T Guda,et al. A cellular perspective to bioceramic scaffolds for bone tissue engineering: the state of the art. , 2008, Current topics in medicinal chemistry.
[89] S. Goldstein,et al. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. , 1999, Journal of biomechanics.
[90] Wai Yee Yeong,et al. Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method , 2016 .
[91] L. Marșavina,et al. Experimental investigations and numerical simulations of notch effect in cellular plastic materials , 2016, IOP Conference Series: Materials Science and Engineering.
[92] W. Binder,et al. Chlorophyll fluorescence, root growth potential, and stomatal conductance as estimates of field performance potential in conifer seedlings , 2007, New Forests.
[93] Diansheng Chen,et al. Evaluation and Prediction of Mass Transport Properties for Porous Implant with Different Unit Cells: A Numerical Study , 2019, BioMed research international.
[94] J. Kubásek,et al. Highly porous, low elastic modulus 316L stainless steel scaffold prepared by selective laser melting. , 2016, Materials science & engineering. C, Materials for biological applications.
[95] Xuan Pei,et al. Bionic design and 3D printing of porous titanium alloy scaffolds for bone tissue repair , 2019, Composites Part B: Engineering.
[96] Cen Chen,et al. 3D printed porous Ti6Al4V cage: Effects of additive angle on surface properties and biocompatibility; bone ingrowth in Beagle tibia model , 2019, Materials & Design.
[97] Paul A. Colegrove,et al. Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement , 2018 .
[98] W. Yeong,et al. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. , 2017, Materials science & engineering. C, Materials for biological applications.
[99] Jianfeng Kang,et al. Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants , 2017 .
[100] S. Karuppudaiyan,et al. Finite element analysis of scaffold for large defect in femur bone , 2018, IOP Conference Series: Materials Science and Engineering.
[101] M. F. Ashby,et al. Potential applications for steel and titanium metal foams , 2005 .
[102] Shiwei Zhou,et al. Nondestructive characterization of bone tissue scaffolds for clinical scenarios. , 2019, Journal of the mechanical behavior of biomedical materials.
[103] Ziyu Zhang,et al. Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting , 2015 .
[104] Deepak M. Kalaskar,et al. 3D printing families: Laser, powder, nozzle based techniques , 2017 .
[105] Han Huang,et al. Deformation behavior of porous PHBV scaffold in compression: A finite element analysis study. , 2019, Journal of the mechanical behavior of biomedical materials.
[106] T. Albrektsson,et al. Osteoinduction, osteoconduction and osseointegration , 2001, European Spine Journal.
[107] Byran J. Smucker,et al. Validation of scaffold design optimization in bone tissue engineering: finite element modeling versus designed experiments , 2017, Biofabrication.
[108] D. Gu,et al. Compressive Properties of Bio‐Inspired Reticulated Shell Structures Processed by Selective Laser Melting , 2019, Advanced Engineering Materials.
[109] Lorenzo Moroni,et al. The Use of Finite Element Analyses to Design and Fabricate Three-Dimensional Scaffolds for Skeletal Tissue Engineering , 2017, Front. Bioeng. Biotechnol..
[110] M. Dargusch,et al. Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell , 2019, Materials Science and Engineering: A.
[111] J. Kruth,et al. Residual stresses in selective laser sintering and selective laser melting , 2006 .
[112] Nicola Contuzzi,et al. Manufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting , 2014, Materials.
[113] H. Bhadeshia,et al. The Strengthening of Iron and its Alloys , 2006 .
[114] Jordi Delgado,et al. Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material , 2013 .
[115] T. Zhai,et al. Effects of Pore Position in Depth on Stress/Strain Concentration and Fatigue Crack Initiation , 2012, Metallurgical and Materials Transactions A.
[116] M. Amaral,et al. Densification route and mechanical properties of Si3N4-bioglass biocomposites. , 2002, Biomaterials.
[117] L. Froyen,et al. Fundamentals of Selective Laser Melting of alloyed steel powders , 2006 .
[118] Xiaowei Deng,et al. Scaffold Structural Microenvironmental Cues to Guide Tissue Regeneration in Bone Tissue Applications , 2018, Nanomaterials.
[119] Emil H Schemitsch,et al. Size Matters: Defining Critical in Bone Defect Size! , 2017, Journal of orthopaedic trauma.
[120] M. Whittaker,et al. Titanium Alloys , 2015 .
[121] Oscar Martel,et al. Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction , 2018 .
[122] Mark Taylor,et al. Computational modelling of cell spreading and tissue regeneration in porous scaffolds. , 2007, Biomaterials.
[123] Li Wang,et al. Recent progress in the synthesis of poly(organo)phosphazenes and their applications in tissue engineering and drug delivery , 2018 .
[124] N. Velisavljevic,et al. Direct hcp→bcc structural phase transition observed in titanium alloy at high pressure , 2007 .
[125] Rashid K. Abu Al-Rub,et al. Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study , 2019, Materials & Design.
[126] C. Please,et al. Pore Geometry Regulates Early Stage Human Bone Marrow Cell Tissue Formation and Organisation , 2013, Annals of Biomedical Engineering.
[127] M. Mastrogiacomo,et al. Role of scaffold internal structure on in vivo bone formation in macroporous calcium phosphate bioceramics. , 2006, Biomaterials.
[128] M. Ashby,et al. FOAM TOPOLOGY BENDING VERSUS STRETCHING DOMINATED ARCHITECTURES , 2001 .
[129] H Van Oosterwyck,et al. Prediction of permeability of regular scaffolds for skeletal tissue engineering: a combined computational and experimental study. , 2012, Acta biomaterialia.
[130] Roger J. Narayan,et al. Additive Manufacturing for Tissue Engineering , 2018 .
[131] E. Ewais. Bioceramic Scaffolds , 2019 .
[132] D. F. de Lange,et al. A complete structural performance analysis and modelling of hydroxyapatite scaffolds with variable porosity , 2015, Computer methods in biomechanics and biomedical engineering.
[133] Ke Yang,et al. Study on compression behavior of porous magnesium used as bone tissue engineering scaffolds , 2009, Biomedical materials.
[134] R. Wong,et al. Unraveling the mechanical strength of biomaterials used as a bone scaffold in oral and maxillofacial defects , 2018, Oral Science International.
[135] K. Zhou,et al. Pore structures and mechanical properties of porous titanium scaffolds by bidirectional freeze casting. , 2017, Materials science & engineering. C, Materials for biological applications.
[136] V. Laizé,et al. Development of two bone-derived cell lines from the marine teleost Sparus aurata; evidence for extracellular matrix mineralization and cell-type-specific expression of matrix Gla protein and osteocalcin , 2004, Cell and Tissue Research.
[137] Anthony J. Deegan,et al. Influence of Additive Manufactured Scaffold Architecture on the Distribution of Surface Strains and Fluid Flow Shear Stresses and Expected Osteochondral Cell Differentiation , 2017, Front. Bioeng. Biotechnol..
[138] A. Olivares,et al. Finite element study of scaffold architecture design and culture conditions for tissue engineering. , 2009, Biomaterials.
[139] Mythili Prakasam,et al. Biodegradable Materials and Metallic Implants—A Review , 2017, Journal of functional biomaterials.
[140] Lei Jin,et al. In vitro cell proliferation evaluation of porous nano-zirconia scaffolds with different porosity for bone tissue engineering , 2015, Biomedical materials.
[141] S. Zaefferer. A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture , 2003 .
[142] Kristina Shea,et al. Computationally designed lattices with tuned properties for tissue engineering using 3D printing , 2017, PloS one.
[143] S. L. Sing,et al. Concepts of Selective Laser Melting for Orthopaedic Implants , 2018, Springer Theses.
[144] J. Kruth,et al. Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures , 2015 .
[145] C. Tuck,et al. The formation of α + β microstructure in as-fabricated selective laser melting of Ti–6Al–4V , 2014 .
[146] D. Kaplan,et al. Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.
[147] Masoud Asgari,et al. Elastic and plastic characterization of a new developed additively manufactured functionally graded porous lattice structure: Analytical and numerical models , 2019, International Journal of Mechanical Sciences.
[148] V. Sikavitsas,et al. Predicting the stress distribution within scaffolds with ordered architecture. , 2012, Biorheology.
[149] S. Kenzari,et al. Stress Concentration and Mechanical Strength of Cubic Lattice Architectures , 2018, Materials.
[150] Scott J Hollister,et al. Scaffold engineering: a bridge to where? , 2009, Biofabrication.
[151] Masakazu Kawashita,et al. Novel bioactive materials with different mechanical properties. , 2003, Biomaterials.
[152] Y. Murakami. Stress concentration , 2019, Metal Fatigue.
[153] Stefan Lohfeld,et al. Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling , 2013, Annals of Biomedical Engineering.
[154] A. Vaccaro. The role of the osteoconductive scaffold in synthetic bone graft. , 2002, Orthopedics.
[155] Charles P. Lin,et al. Engineered vascularized bone grafts , 2010, Proceedings of the National Academy of Sciences.
[156] R. Banerjee,et al. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys , 2017, Science and technology of advanced materials.
[157] Hala Zreiqat,et al. Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects , 2016, Scientific Reports.
[158] Dietmar Werner Hutmacher,et al. State of the art and future directions of scaffold‐based bone engineering from a biomaterials perspective , 2007, Journal of tissue engineering and regenerative medicine.
[159] Amir A Zadpoor,et al. Bone tissue regeneration: the role of scaffold geometry. , 2015, Biomaterials science.
[160] Davar Ali,et al. Finite element analysis of mechanical behavior, permeability and fluid induced wall shear stress of high porosity scaffolds with gyroid and lattice-based architectures. , 2017, Journal of the mechanical behavior of biomedical materials.
[161] B Vamsi Krishna,et al. Low stiffness porous Ti structures for load-bearing implants. , 2007, Acta biomaterialia.
[162] Qing Liu,et al. Osteogenic Scaffolds for Bone Reconstruction , 2012, BioResearch open access.
[163] Arun Arjunan,et al. Sound Transmission Loss of Light-Weight Slotted Steel Studs in a Gypsum Plasterboard Partition Wall , 2017 .
[164] Howon Lee,et al. Ultralight, ultrastiff mechanical metamaterials , 2014, Science.
[165] Óscar L. Rodríguez-Montaño,et al. Comparison of the mechanobiological performance of bone tissue scaffolds based on different unit cell geometries. , 2018, Journal of the mechanical behavior of biomedical materials.
[166] Jan Wieding,et al. The Effect of Structural Design on Mechanical Properties and Cellular Response of Additive Manufactured Titanium Scaffolds , 2012, Materials.
[167] A. Boccaccini,et al. Determination of stress concentration factors in porous materials , 1996 .
[168] P. Ji,et al. The effect of 3D-printed Ti6Al4V scaffolds with various macropore structures on osteointegration and osteogenesis: A biomechanical evaluation. , 2018, Journal of the mechanical behavior of biomedical materials.
[169] Mark Stanford,et al. Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications , 2013 .
[170] M. Bermingham,et al. Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering. , 2017, Journal of the mechanical behavior of biomedical materials.
[171] K. Leong,et al. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. , 2002, Tissue engineering.
[172] Nicholas Dunne,et al. Effect of microporosity on scaffolds for bone tissue engineering , 2018, Regenerative biomaterials.
[173] Tomiharu Matsushita,et al. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. , 2016, Materials science & engineering. C, Materials for biological applications.
[174] Wai Yee Yeong,et al. Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[175] P. Lee,et al. Failure Analysis of an Additive Manufactured Porous Titanium Structure for Orthopedic Implant Applications , 2016 .
[176] Wei Sun,et al. Computer‐aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds , 2004, Biotechnology and applied biochemistry.
[177] Rasheed Atif,et al. The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites , 2016 .
[178] T. Woodfield,et al. Microchannels in Development, Survival, and Vascularisation of Tissue Analogues for Regenerative Medicine. , 2019, Trends in biotechnology.
[179] Aldo R Boccaccini,et al. Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds , 2010, Journal of The Royal Society Interface.
[180] Francesco Baino,et al. Bioceramics and Scaffolds: A Winning Combination for Tissue Engineering , 2015, Front. Bioeng. Biotechnol..
[181] M. Kaur,et al. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. , 2019, Materials science & engineering. C, Materials for biological applications.
[182] Rubens Caram,et al. Laser additive processing of a functionally graded internal fracture fixation plate , 2017 .
[183] Abhay Pandit,et al. Fabrication methods of porous metals for use in orthopaedic applications. , 2006, Biomaterials.
[184] S. Raman,et al. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications , 2011 .
[185] Stefan Hengsbach,et al. High-strength cellular ceramic composites with 3D microarchitecture , 2014, Proceedings of the National Academy of Sciences.
[186] Davar Ali,et al. Finite element analysis of boron nitride nanotubes' shielding effect on the stress intensity factor of semielliptical surface crack in a wide range of matrixes using RVE model , 2017 .
[187] R. Huiskes,et al. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials. , 1992, Clinical orthopaedics and related research.
[188] Junjie Jiang,et al. Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties , 2018, Materials & Design.
[189] R. Ainsworth. Stress Redistribution Effects on Creep Crack Growth , 1989 .
[190] Mohsen Badrossamay,et al. Mapping and Modelling Single Scan Track Formation in Direct Metal Selective Laser Melting , 2004 .
[191] Yang Hao,et al. Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting , 2012 .
[192] O. Harrysson,et al. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology , 2008 .
[193] Abhay S Pandit,et al. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. , 2008, Biomaterials.
[194] L. C. Brinson,et al. Finite element modeling of porous titanium , 2007, International Journal of Solids and Structures.
[195] John D. Currey,et al. Stress Concentrations in Bone , 1962 .
[196] A. A. Griffith. The Phenomena of Rupture and Flow in Solids , 1921 .
[197] Ishvari F. Zuñiga Tello,et al. Numerical investigation of the stress concentration on 7075-T651 aluminum alloy with one or two hemispherical pits under uniaxial or biaxial loading , 2019, Adv. Eng. Softw..
[198] Jun Xu,et al. Compressive properties of hollow lattice truss reinforced honeycombs (Honeytubes) by additive manufacturing: Patterning and tube alignment effects , 2018, Materials & Design.
[199] Lars-Erik Rännar,et al. Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction , 2017 .
[200] R. G. Reid,et al. Analysis of stress concentration around a spheroidal cavity under asymmetric dynamic loading , 2011 .
[201] Zaliha Wahid,et al. ABAQUS Simulation of Different Critical Porosities Cubical Scaffold Model , 2019, IOP Conference Series: Materials Science and Engineering.
[202] Wai Yee Yeong,et al. 3D bioprinting processes: A perspective on classification and terminology , 2018, International journal of bioprinting.
[203] John J. Vericella,et al. Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness , 2014 .
[204] Chuanzhen Huang,et al. Design and Simulation of Flow Field for Bone Tissue Engineering Scaffold Based on Triply Periodic Minimal Surface , 2019, Chinese Journal of Mechanical Engineering.
[205] Peter D. Lee,et al. Modelling of Marangoni effects in electron beam melting , 1998, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.
[206] P. M. Lister,et al. A Computationally-Efficient Numerical Model to Characterize the Noise Behavior of Metal-Framed Walls , 2015 .
[207] W. Walsh,et al. Ovine model for critical-size tibial segmental defects. , 2014, Comparative medicine.
[208] J. Kruth,et al. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison. , 2017, Journal of the mechanical behavior of biomedical materials.
[209] R. Lakes. Materials with structural hierarchy , 1993, Nature.
[210] Arun Arjunan,et al. Targeted sound attenuation capacity of 3D printed noise cancelling waveguides , 2019, Applied Acoustics.
[211] Debdulal Das,et al. Understanding compressive deformation behavior of porous Ti using finite element analysis. , 2016, Materials science & engineering. C, Materials for biological applications.
[212] R. B. Ashman,et al. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.
[213] Rama Krishna Alla,et al. Surface Roughness of Implants: A Review , 2011 .
[214] F. Mahyudin,et al. Combination of bone marrow aspirate, cancellous bone allograft, and platelet-rich plasma as an alternative solution to critical-sized diaphyseal bone defect: A case series , 2019, International journal of surgery case reports.
[215] Ralf Schumacher,et al. Bone regeneration by the osteoconductivity of porous titanium implants manufactured by selective laser melting: a histological and micro computed tomography study in the rabbit. , 2013, Tissue engineering. Part A.
[216] T. Vaughan,et al. Quantification of fluid shear stress in bone tissue engineering scaffolds with spherical and cubical pore architectures , 2016, Biomechanics and modeling in mechanobiology.
[217] H. K. D. H. Bhadeshia,et al. Chapter 2 – Strengthening of Iron and Its Alloys , 2017 .
[218] Hideo Nakajima,et al. Metallic Scaffolds for Bone Regeneration , 2009, Materials.
[219] D Lacroix,et al. A finite element study of mechanical stimuli in scaffolds for bone tissue engineering. , 2008, Journal of biomechanics.
[220] Q. Rong,et al. Finite-element design and optimization of a three-dimensional tetrahedral porous titanium scaffold for the reconstruction of mandibular defects. , 2017, Medical engineering & physics.
[221] Davar Ali,et al. Permeability and fluid flow-induced wall shear stress of bone tissue scaffolds: Computational fluid dynamic analysis using Newtonian and non-Newtonian blood flow models , 2018, Comput. Biol. Medicine.
[222] P R Fernandes,et al. Permeability analysis of scaffolds for bone tissue engineering. , 2012, Journal of biomechanics.
[223] Mark Stanford,et al. An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting , 2014 .
[224] Damiano Pasini,et al. Fully porous 3D printed titanium femoral stem to reduce stress‐shielding following total hip arthroplasty , 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[225] S. Kenzari,et al. A continuous crystallographic approach to generate cubic lattices and its effect on relative stiffness of architectured materials , 2018 .
[226] Moataz M. Attallah,et al. The design of additively manufactured lattices to increase the functionality of medical implants. , 2019, Materials science & engineering. C, Materials for biological applications.
[227] Mohsen Badrossamay,et al. Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling , 2014 .
[228] Cuie Wen,et al. Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications , 2018 .
[229] G. Maliaris,et al. Mechanical Behavior of 3D Printed Stochastic Lattice Structures , 2016 .
[230] Shaun Eshraghi,et al. Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone-hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering. , 2012, Acta biomaterialia.
[231] D. Dunand,et al. High strength, low stiffness, porous NiTi with superelastic properties. , 2005, Acta biomaterialia.