Xylene sensing properties of aryl-bridged polysilsesquioxane thin films coupled to gold nanoparticles

Surface plasmon resonance gas sensors based on organic–inorganic hybrid thin films coupled to gold nanoparticles were fabricated and tested against the detection of xylene at the concentration of 30 ppm. Such nanocomposites are prepared either by dispersing Au nanoparticles inside an aryl-bridged polysilsesquioxane system, synthesized via a sol–gel process, or by depositing an aryl-bridged polysilsesquioxane film on Au nanoparticle sub-monolayers. Ultra-high-vacuum temperature programmed desorption of xylene on both the aryl-bridged polysilsesquioxane films and the nanocomposite Au/hybrid system was investigated, resulting in an interaction energy between the sensitive film and the gas molecules in the 38–139 kJ mol−1 range. The functional activity of the nanostructured composites as xylene gas optical sensors was tested monitoring gold localized surface plasmon resonance, and was shown to be reversible. The detection sensitivity was calculated in 0.1 ppb through a calibration procedure in the 16–30 ppm range, and a threshold limit of detection of 265 ppb xylene was estimated as three standard deviations of the baseline noise. Typical response and regeneration times are of one min and about one ten of minutes, respectively.

[1]  K. Shea,et al.  Bridged polysilsesquioxanes. molecular-engineered hybrid organic-inorganic materials , 2001 .

[2]  C. Xie,et al.  Formaldehyde‐, Benzene‐, and Xylene‐Sensing Characterizations of Zn–W–O Nanocomposite Ceramics , 2007 .

[3]  X. Zhou,et al.  Photon‐ and electron‐induced chemistry of chlorobenzene on Ag(111) , 1990 .

[4]  V. Choudhary,et al.  Temperature programmed desorption of toluene, p-xylene, mesitylene and naphthalene on mesoporous high silica MCM-41 for characterizing its surface properties and measuring heats of adsorption , 2000 .

[5]  Kurt W. Kolasinski,et al.  Surface Science: Foundations of Catalysis and Nanoscience , 2002 .

[6]  J. Turkevich,et al.  Coagulation of Colloidal Gold , 2002 .

[7]  Chia-Jung Lu,et al.  A vapor sensor array using multiple localized surface plasmon resonance bands in a single UV-vis spectrum. , 2010, Talanta.

[8]  Douglas A. Loy,et al.  BRIDGED POLYSILSESQUIOXANES. HIGHLY POROUS HYBRID ORGANIC-INORGANIC MATERIALS , 1995 .

[9]  Abhishek Motayed,et al.  Highly selective GaN-nanowire/TiO2-nanocluster hybrid sensors for detection of benzene and related environment pollutants , 2011, Nanotechnology.

[10]  Bruce E. Koel,et al.  Identification of adsorbed phenyl (C6H5) groups on metal surfaces: Electron-induced dissociation of benzene on Au(111) , 2001 .

[11]  Alessandro Martucci,et al.  Cooperative effect of Au and Pt inside TiO2 matrix for optical hydrogen detection at room temperature using surface plasmon spectroscopy. , 2012, Nanoscale.

[12]  Matthias Karg,et al.  Au nanoparticle monolayers covered with sol-gel oxide thin films: optical and morphological study. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[13]  C. Xie,et al.  High Sensitivity and Selectivity of C-Doped ${\rm WO}_{3}$ Gas Sensors Toward Toluene and Xylene , 2012, IEEE Sensors Journal.

[14]  Michael Vollmer,et al.  Optical properties of metal clusters , 1995 .

[15]  Li Liu,et al.  Synthesis, Characterization, and m-Xylene Sensing Properties of Co-ZnO Composite Nanofibers , 2011 .

[16]  J. Homola.  Surface plasmon resonance sensors for detection of chemical and biological species. , 2008, Chemical reviews.

[17]  Giovanna Brusatin,et al.  Hybrid porous resist with sensing functionality , 2011 .

[18]  Anatolii Viacheslavovich Sokolov,et al.  Optical Properties of Metals , 1967 .

[19]  Giovanna Brusatin,et al.  Positive resist for UV and X-ray lithography synthesized through sol–gel chemistry , 2011 .

[20]  Alessandro Martucci,et al.  Gold‐Nanoparticle‐Doped TiO2 Semiconductor Thin Films: Optical Characterization , 2007 .

[21]  K. Shea,et al.  Aryl-bridged polysilsesquioxanes - New microporous materials , 1989 .

[22]  F. Romanato,et al.  Short and long range surface plasmon polariton waveguides for xylene sensing , 2013, Nanotechnology.

[23]  L Brigo,et al.  Phenyl-bridged polysilsesquioxane positive and negative resist for electron beam lithography. , 2012, Nanotechnology.

[24]  V. Harmandaris,et al.  Properties of Benzene Confined between Two Au(111) Surfaces Using a Combined Density Functional Theory and Classical Molecular Dynamics Approach , 2011 .

[25]  W. Y. Wang,et al.  Improvement in gas sensitivity of ZnO thick film to volatile organic compounds (VOCs) by adding TiO2 , 2004 .

[26]  Chia-Jung Lu,et al.  Surface modification on silver nanoparticles for enhancing vapor selectivity of localized surface plasmon resonance sensors , 2009 .

[27]  E. Robens,et al.  Ethylene and phenylene bridged polysilsesquioxanes functionalized by amine and thiol groups as adsorbents of volatile organic compounds , 2007 .

[28]  Giorgio Sberveglieri,et al.  Solid state gas sensing , 2009 .

[29]  Nicole Jaffrezic-Renault,et al.  SPR fibre sensor sensitised by fluorosiloxane polymers , 2001 .

[30]  Jeffrey N. Anker,et al.  Gas sensing with high-resolution localized surface plasmon resonance spectroscopy. , 2010, Journal of the American Chemical Society.

[31]  F. Romanato,et al.  Active sol–gel thin film on nanostructured plasmonic surface , 2010 .

[32]  Giovanna Brusatin,et al.  New hybrid organic-inorganic sol-gel positive resist , 2010 .