Water cooling assisted laser dissimilar welding with filler wire of nickel-based alloy/austenitic stainless steel

[1]  Yueqing Xia,et al.  Inhomogeneous microstructure and mechanical properties of rotary friction welded joints between 5052 aluminum alloy and 304 stainless steel , 2019, Journal of Materials Processing Technology.

[2]  Yupeng Guo,et al.  Fiber laser butt joining of AZ31B alloy to 304 stainless steels with copper foil , 2019, Optics & Laser Technology.

[3]  A. Ekrami,et al.  Corrosion behavior of TLP bonded stainless steel 304 with Ni-based interlayer , 2019, Journal of Manufacturing Processes.

[4]  Xiaoyan Zeng,et al.  Microstructures and mechanical properties of laser-arc hybrid welded dissimilar pure copper to stainless steel , 2019, Optics & Laser Technology.

[5]  Zhuji Jin,et al.  Cavitation erosion behavior of Hastelloy™ C-276 weld by laser welding , 2019, Wear.

[6]  J. Majumdar,et al.  Effect of post-weld heat treatment on the tensile strength of laser beam welded Hastelloy C-276 sheets at different heat inputs , 2019, Journal of Manufacturing Processes.

[7]  Yifu Shen,et al.  A strategy for improving the mechanical properties of FSWed joints of non-heat-treatable Al alloys through a combination of water cooling and particle addition , 2018, Journal of Manufacturing Processes.

[8]  S. Tiwari,et al.  Consumable selection for pulsed current gas tungsten arc welded bimetallic joints between Super C-276 alloy and Ti -stabilized Grade 321 , 2018 .

[9]  Han. Dong,et al.  The effect of aging on the serrated yielding and intermediate temperature embrittlement of nickel-base C-276 alloy , 2018 .

[10]  K. Shinozaki,et al.  Effect of Chemical Composition on Susceptibility to Weld Solidification Cracking in Austenitic Weld Metal , 2017, Metallurgical and Materials Transactions A.

[11]  Chun-ming Lin,et al.  Effects of water cooling on microstructural evolution, hardness and anti-corrosion properties of Inconel 52 fusion-cladded AISI 316L stainless steel , 2017 .

[12]  Haiyang Li,et al.  Effect of Water Cooling on the Microstructure and Mechanical Properties of 6N01 Aluminum Alloy P-MIG-Welded Joints , 2017, Journal of Materials Engineering and Performance.

[13]  Weidong Liu,et al.  Water cooling keyhole gas tungsten arc welding of HSLA steel , 2017 .

[14]  Ravindra V. Taiwade,et al.  Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments Between Hastelloy C-276/AISI 321 Austenitic Stainless Steel , 2017, Journal of Materials Engineering and Performance.

[15]  M. Manikandan,et al.  Analysis of Metallurgical and Mechanical Properties of Continuous and Pulsed Current Gas Tungsten Arc Welded Alloy C-276 with Duplex Stainless Steel , 2017, Transactions of the Indian Institute of Metals.

[16]  C. C. Silva,et al.  Assessment of microstructure of alloy Inconel 686 dissimilar weld claddings , 2016 .

[17]  Q. Lu,et al.  Optical laser welding Q235 steel joint structure and performance under different cooling conditions , 2015 .

[18]  Yixiong Wu,et al.  Characteristics of plasma plume and effect mechanism of lateral restraint during high power CO2 laser welding process , 2014 .

[19]  D. Guo,et al.  Trailing heat sink effects on residual stress and distortion of pulsed laser welded Hastelloy C-276 thin sheets , 2014 .

[20]  C. Liang,et al.  Method for evaluating yield strength of laser weldments of maraging steels using hardness test , 2013 .

[21]  D. K. Dwivedi,et al.  Influence of in-process cooling on tensile behaviour of friction stir welded joints of AA7039 , 2012 .

[22]  H. J. Zhang,et al.  Effect of Water Cooling on the Performances of Friction Stir Welding Heat-Affected Zone , 2012, Journal of Materials Engineering and Performance.

[23]  F. M. Ghaini,et al.  The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy , 2012 .

[24]  D. Guo,et al.  Segregation Characteristics of Pulsed Laser Butt Welding of Hastelloy C-276 , 2011 .

[25]  K. Rajasekhar,et al.  Microstructural evolution during solidification of austenitic stainless steel weld metals: A color metallographic and electron microprobe analysis study , 1997 .

[26]  A. D. Romig,et al.  The welding metallurgy of HASTELLOY alloys C-4, C-22, and C-276 , 1986 .

[27]  M. Raghavan,et al.  Determination of isothermal sections of nickel rich portion of Ni-Cr-Mo system by analytical electron microscopy , 1984 .

[28]  D. Tabor.  A simple theory of static and dynamic hardness , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[29]  E. Mittemeijer.  Fundamentals of Materials Science , 2019, Craig's Restorative Dental Materials.

[30]  M. Lei,et al.  Ultrasonic vibration assisted laser welding of nickel-based alloy and Austenite stainless steel , 2018 .

[31]  Guang-yi Ma,et al.  Microstructure characteristic and mechanical property of pulsed laser lap-welded nickel-based superalloy and stainless steel , 2017 .