Energy Absorption Characteristics of a CFRP-Al Hybrid Thin-Walled Circular Tube under Axial Crushing

Thin-walled tubes have gained wide applications in aerospace, automobile and other engineering fields due to their excellent energy absorption and lightweight properties. In this study, a novel method of entropy-weighted TOPSIS was adopted to study the energy absorption characteristics of a thin-walled circular tube under axial crushing. Three types of thin-walled circular tubes, namely, aluminum (Al) tubes, carbon-fiber-reinforced plastics (CFRP) tubes and CFRP-Al hybrid thin-walled tubes, were fabricated. Quasi-static axial crushing tests were then carried out for these specimens, and their failure modes and energy absorption performance were analyzed. The CFRP material parameters were obtained through tensile, compression and in-plane shear tests of CFRP laminates. The finite element models for the quasi-static axial crushing of these three types of circular tubes were established. The accuracy of the finite element models was verified by comparing the simulation results with the test results. On this basis, the effects of the geometric dimension and ply parameters of a CFRP-Al hybrid thin-walled circular tube on the axial crushing energy absorption characteristics were studied based on an orthogonal design and entropy-weighted TOPSIS method. The results showed that Al tube thickness, CFRP ply thickness and orientation have great effect on the energy absorption performance of a CFRP-Al hybrid thin-walled circular tube, whereas the tube diameter and length have little effect. The energy absorption capability of a CFRP-Al hybrid tube can be improved by increasing the thickness of the Al tube and the CFRP tube as well as the number of ±45° plies.

[1]  Rongchao Jiang,et al.  A Hybrid Multi-Objective Optimization Method Based on NSGA-II Algorithm and Entropy Weighted TOPSIS for Lightweight Design of Dump Truck Carriage , 2021, Machines.

[2]  Chen Liang,et al.  Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters , 2021 .

[3]  Haiyang Yang,et al.  Crashworthiness of circular fiber reinforced plastic tubes filled with composite skeletons/aluminum foam under drop-weight impact loading , 2021 .

[4]  G. Luo,et al.  On energy-absorbing mechanisms and structural crashworthiness of laterally crushed thin-walled structures filled with aluminum foam and CFRP skeleton , 2021 .

[5]  S. Ebrahimi-Nejad,et al.  Multi-objective optimization of a sports car suspension system using simplified quarter-car models , 2020 .

[6]  Guohua Zhu,et al.  Energy-absorbing mechanisms and crashworthiness design of CFRP multi-cell structures , 2020 .

[7]  S. Pirmohammad,et al.  Crashworthiness optimization design of foam-filled tapered decagonal structures subjected to axial and oblique impacts , 2019, Journal of Central South University.

[8]  Qing Li,et al.  Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes , 2018, Composite Structures.

[9]  Qiang Liu,et al.  On crushing characteristics of different configurations of metal-composites hybrid tubes , 2017 .

[10]  Abdul-Ghani Olabi,et al.  On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments , 2017 .

[11]  Thomas Tröster,et al.  Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact , 2017 .

[12]  Dengfeng Wang,et al.  A hybrid method of modified NSGA-II and TOPSIS for lightweight design of parameterized passenger car sub-frame , 2016 .

[13]  Scott W. Case,et al.  Numerical modeling of the effects of FRP thickness and stacking sequence on energy absorption of metal–FRP square tubes , 2016 .

[14]  Lieping Ye,et al.  Compressive bearing capacity of CFRP–aluminum alloy hybrid tubes , 2016 .

[15]  Mostafa Rassaian,et al.  LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen , 2011 .

[16]  Rongchao Jiang,et al.  Multi-objective Optimization of Vehicle Dynamics Performance Based on Entropy Weighted TOPSIS Method , 2018 .

[17]  S. Li,et al.  Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading , 2018 .

[18]  Feng Zhen-y,et al.  Evaluation method for energy-absorbing composite structures with uncertain parameters , 2015 .

[19]  Yi Xiaosu,et al.  Effects of triggers on the energy absorption behavior of sine-wave beam and the crush morphology , 2008 .