Design of a multilink-articulated wheeled inspection robot for winding pipelines: AIRo-II

This paper presents a multilink-articulated robot with omni and hemispherical wheels (AIRo-II) for inspecting and exploring winding pipes. To quickly adapt to winding pipes, holonomic rolling movement without moving forward and backward is more useful. However, this requires the replacement of driving actuators with rolling actuators at the expense of the driving force. In this paper, we investigate the possibility of high maneuverability of multilink-articulated robots in winding pipes by using less actuators and by designing spring joints. We further validate this by experimental verification.

[1]  Rüdiger Dillmann,et al.  Compliant motion of a multi-segmented inspection robot , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Rüdiger Dillmann,et al.  KAIRO 3: Moving over stairs & unknown obstacles with reconfigurable snake-like robots , 2015, 2015 European Conference on Mobile Robots (ECMR).

[3]  Hagen Schempf,et al.  Visual and nondestructive evaluation inspection of live gas mains using the Explorer™ family of pipe robots , 2010, J. Field Robotics.

[4]  Stefano Stramigioli,et al.  Development of an inspection robot for small diameter gas distribution mains , 2011, 2011 IEEE International Conference on Robotics and Automation.

[5]  Hyoukryeol Choi,et al.  Design of back-drivable joint mechanism for in-pipe robot , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[6]  Shugen Ma,et al.  Development of an omnidirectional mobile platform , 2009, 2009 International Conference on Mechatronics and Automation.

[7]  Shugen Ma,et al.  1P2-A01 An Articulated Wheeled In-pipe Inspection Robot with Holonomic Rolling Motion , 2015 .

[8]  Kenjiro Tadakuma,et al.  Development of holonomic omnidirectional Vehicle with “Omni-Ball”: spherical wheels , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Shigeo Hirose,et al.  2A2-L08 Development of articulated spherical wheeled in-pipe robot "ThesV"(Mobile Robot with Special Mechanism) , 2011 .

[10]  K. Tadakuma,et al.  Tetrahedral Mobile Robot with Novel Ball Shape Wheel , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[11]  Joachim Hertzberg,et al.  Towards autonomous sewer robots: the MAKRO project , 1999 .

[12]  Hyoukryeol Choi,et al.  2-2D differential gear mechanism for robot moving inside pipelines , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[13]  Shigeo Hirose,et al.  PipeTron series - Robots for pipe inspection , 2014, Proceedings of the 2014 3rd International Conference on Applied Robotics for the Power Industry.

[14]  Shugen Ma,et al.  Dynamic analysis of 3-dimensional snake robots , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[15]  SchempfHagen,et al.  Visual and nondestructive evaluation inspection of live gas mains using the Explorer family of pipe robots , 2010 .

[16]  Stefano Stramigioli,et al.  Design of a robot for in-pipe inspection using omnidirectional wheels and active stabilization , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[17]  Hagen Schempf,et al.  Visual and nondestructive evaluation inspection of live gas mains using the Explorer™ family of pipe robots , 2010 .

[18]  Pål Liljebäck,et al.  A snake-like robot for internal inspection of complex pipe structures (PIKo) , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[19]  George C. Vradis,et al.  DEVELOPMENT OF AN INSPECTION PLATFORM AND A SUITE OF SENSORS FOR ASSESSING CORROSION AND MECHANICAL DAMAGE ON UNPIGGABLE TRANSMISSION MAINS , 2004 .