Validation and optimization of SST k-ω turbulence model for pollutant dispersion within a building array

Abstract The prediction of the dispersion of air pollutants in urban areas is of great importance to public health, homeland security, and environmental protection. Computational Fluid Dynamics (CFD) emerges as an effective tool for pollutant dispersion modelling. This paper reports and quantitatively validates the shear stress transport (SST) k-ω turbulence closure model and its transitional variant for pollutant dispersion under complex urban environment for the first time. Sensitivity analysis is performed to establish recommendation for the proper use of turbulence models in urban settings. The current SST k-ω simulation is validated rigorously by extensive experimental data using hit rate for velocity components, and the “factor of two” of observations (FAC2) and fractional bias (FB) for concentration field. The simulation results show that current SST k-ω model can predict flow field nicely with an overall hit rate of 0.870, and concentration dispersion with FAC2 = 0.721 and FB = 0.045. The flow simulation of the current SST k-ω model is slightly inferior to that of a detached eddy simulation (DES), but better than that of standard k-e model. However, the current study is the best among these three model approaches, when validated against measurements of pollutant dispersion in the atmosphere. This work aims to provide recommendation for proper use of CFD to predict pollutant dispersion in urban environment.

[1]  F. Menter.  Zonal Two Equation Kappa-Omega Turbulence Models for Aerodynamic Flows , 1993 .

[2]  Tetsuro Tamura,et al.  LES of turbulent wind and gas dispersion in a city , 2012 .

[3]  Dejan Mumovic,et al.  Integrated air quality modelling for a designated air quality management area in Glasgow , 2006 .

[4]  M. Strelets.  Detached eddy simulation of massively separated flows , 2001 .

[5]  Rex Britter,et al.  Simulations of pollutant dispersion within idealised urban-type geometries with CFD and integral models , 2007 .

[6]  Riccardo Buccolieri,et al.  Analysis of local scale tree-atmosphere interaction on pollutant concentration in idealized street canyons and application to a real urban junction , 2011 .

[7]  Mats Sandberg,et al.  The influence of building height variability on pollutant dispersion and pedestrian ventilation in idealized high-rise urban areas , 2012 .

[8]  Margaret Bell,et al.  Air flow and concentration fields at urban road intersections for improved understanding of personal exposure. , 2011, Environment international.

[9]  Yoshihide Tominaga,et al.  CFD simulation of micro-scale pollutant dispersion in the built environment , 2013 .

[10]  Theodore Stathopoulos,et al.  Application of computational fluid dynamics in building performance simulation for the outdoor environment: an overview , 2011 .

[11]  Yoshihide Tominaga,et al.  Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan , 2007 .

[12]  P. Richards,et al.  Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model , 1993 .

[13]  Simon Branford,et al.  Flow structure and near-field dispersion in arrays of building-like obstacles , 2014 .

[14]  P. A. Costa Rocha,et al.  k–ω SST (shear stress transport) turbulence model calibration: A case study on a small scale horizontal axis wind turbine , 2014 .

[15]  Florian Menter,et al.  The SST Turbulence Model with Improved Wall Treatment for Heat Transfer Predictions in Gas Turbines , 2003 .

[16]  Fue-Sang Lien,et al.  Numerical study of dispersing pollutant clouds in a built-up environment , 2009 .

[17]  Patrick Rambaud,et al.  CFD modelling of small particle dispersion: The influence of the turbulence kinetic energy in the atmospheric boundary layer , 2009 .

[18]  Y. Miao,et al.  Construction and validation of an urban area flow and dispersion model on building scales , 2013, Acta Meteorologica Sinica.

[19]  Pietro Salizzoni,et al.  Recent advancements in numerical modelling of flow and dispersion in urban areas: a short review , 2013 .

[20]  Richard Griffiths,et al.  Field and wind tunnel investigations of plume dispersion around single surface obstacles , 2003 .

[21]  K. Kakosimos,et al.  Application of Detached Eddy Simulation to neighbourhood scale gases atmospheric dispersion modelling. , 2013, Journal of hazardous materials.

[22]  Thierry Maître,et al.  Modeling of the flow in a Darrieus water turbine: Wall grid refinement analysis and comparison with experiments , 2013 .

[23]  M. Gu,et al.  Influences of equilibrium atmosphere boundary layer and turbulence parameter on wind loads of low-rise buildings , 2008 .

[24]  Yoshihide Tominaga,et al.  Numerical simulation of dispersion around an isolated cubic building: Comparison of various types of k–ɛ models , 2009 .

[25]  Fue-Sang Lien,et al.  Numerical modeling of passive scalar dispersion in an urban canopy layer , 2007 .

[26]  Bert Blocken,et al.  Near-field pollutant dispersion in an actual urban area: Analysis of the mass transport mechanism by high-resolution Large Eddy Simulations , 2015 .

[27]  S. Gokhale,et al.  The impact of traffic-flow patterns on air quality in urban street canyons. , 2016, Environmental pollution.

[28]  Kit Ming Lam,et al.  Recent progress in CFD modelling of wind field and pollutant transport in street canyons , 2006 .

[29]  K. Pericleous,et al.  Modelling air quality in street canyons : a review , 2003 .

[30]  Zheng-Tong Xie,et al.  Large-eddy simulation for flow and dispersion in urban streets , 2009 .

[31]  D. Wilcox.  Turbulence modeling for CFD , 1993 .

[32]  Theodore Stathopoulos,et al.  Assessment of near-field pollutant dispersion: Effect of upstream buildings , 2012 .

[33]  Yoshihide Tominaga,et al.  CFD Simulation of Near-Field Pollutant Dispersion in the Urban Environment: A Review of Current Modeling Techniques , 2013 .

[34]  Johan Meyers,et al.  Influence of turbulent boundary conditions on RANS simulations of pollutant dispersion in mechanically ventilated enclosures with transitional slot Reynolds number , 2013 .

[35]  Claude Bédard,et al.  Comparison of various types of k–ε models for pollutant emissions around a two-building configuration , 2013 .

[36]  Fue-Sang Lien,et al.  A comparison of large Eddy simulations with a standard k–ε Reynolds-averaged Navier–Stokes model for the prediction of a fully developed turbulent flow over a matrix of cubes , 2003 .

[37]  Xiaoming Cai,et al.  Coupling dynamics and chemistry in the air pollution modelling of street canyons: A review. , 2016, Environmental pollution.

[38]  Bert Blocken,et al.  Influence of avenue-trees on air quality at the urban neighborhood scale. Part I: quality assurance studies and turbulent Schmidt number analysis for RANS CFD simulations. , 2015, Environmental pollution.

[39]  Livia Puljak,et al.  Extracting data from figures with software was faster, with higher interrater reliability than manual extraction. , 2016, Journal of clinical epidemiology.

[40]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation for a generic isolated building : impact of computational parameters , 2012 .

[41]  Bert Blocken,et al.  Influence of avenue-trees on air quality at the urban neighborhood scale. Part II: traffic pollutant concentrations at pedestrian level. , 2015, Environmental pollution.

[42]  Mohamed F. Yassin,et al.  Impact of height and shape of building roof on air quality in urban street canyons , 2011 .

[43]  Theodore Stathopoulos,et al.  Numerical evaluation of pollutant dispersion in the built environment: comparisons between models and experiments , 2008 .

[44]  Theodore Stathopoulos,et al.  Near-field pollutant dispersion in the built environment by CFD and wind tunnel simulations , 2011 .

[45]  Horia Hangan,et al.  A numerical approach to the investigation of wind loading on an array of ground mounted solar photovoltaic (PV) panels , 2016 .

[46]  Xiaoping Liu,et al.  Dispersion of air pollutants around buildings: A review of past studies and their methodologies , 2014 .

[47]  Florian R. Menter,et al.  Review of the shear-stress transport turbulence model experience from an industrial perspective , 2009 .

[48]  R Rota,et al.  Hazardous gas releases in urban areas: assessment of consequences through CFD modelling. , 2010, Journal of hazardous materials.

[49]  Gábor Janiga,et al.  Comparative analysis of turbulence models for the aerodynamic simulation of H-Darrieus rotors , 2015 .

[50]  M. Darwish,et al.  The Finite Volume Method in Computational Fluid Dynamics: An Advanced Introduction with OpenFOAM® and Matlab , 2015 .

[51]  Guixiang Cui,et al.  Large eddy simulation of wind field and plume dispersion in building array , 2008 .

[52]  Yoshihide Tominaga,et al.  Turbulent Schmidt numbers for CFD analysis with various types of flowfield , 2007 .

[53]  N. Koutsourakis,et al.  Evaluation of Reynolds stress, k-ε and RNG k-ε turbulence models in street canyon flows using various experimental datasets , 2012, Environmental Fluid Mechanics.

[54]  R N Meroney,et al.  On the use of numerical modelling for near-field pollutant dispersion in urban environments--A review. , 2016, Environmental pollution.

[55]  G. Cui,et al.  Flow pattern and pollutant dispersion over three dimensional building arrays , 2015 .

[56]  Mauricio Chavez Yanez,et al.  A Comprehensive Numerical Study of the Effects of Adjacent Buildings on Near-Field Pollutant Dispersion , 2014 .

[57]  Jörg Franke,et al.  Validation of OpenFOAM 1.6.x with the German VDI guideline for obstacle resolving micro-scale models , 2012 .

[58]  Jörg Franke,et al.  Recommendations of the COST action C14 on the use of CFD in predicting pedestrian wind environment , 2006 .

[59]  Y. Tominaga.  Flow around a high-rise building using steady and unsteady RANS CFD: Effect of large-scale fluctuations on the velocity statistics , 2015 .

[60]  Hesheng Yu,et al.  Simulation of gaseous pollutant dispersion around an isolated building using the k–ω SST (shear stress transport) turbulence model , 2017, Journal of the Air & Waste Management Association.

[61]  V. Dorer,et al.  Urban Physics: Effect of the micro-climate on comfort, health and energy demand , 2012 .

[62]  Naiping Gao,et al.  The airborne transmission of infection between flats in high-rise residential buildings: A review , 2015, Building and Environment.

[63]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[64]  Guixiang Cui,et al.  Study on micro-atmospheric environment by coupling large eddy simulation with mesoscale model , 2012 .

[65]  P. A. Costa Rocha,et al.  A case study on the calibration of the k–ω SST (shear stress transport) turbulence model for small scale wind turbines designed with cambered and symmetrical airfoils , 2016 .

[66]  A. Chan,et al.  Strategic guidelines for street canyon geometry to achieve sustainable street air quality—part II: multiple canopies and canyons , 2003 .

[67]  Riccardo Buccolieri,et al.  Chapter 1.1 Application and validation of FLUENT flow and dispersion modelling within complex geometries , 2006 .

[68]  Konrad Koeltzsch.  The height dependence of the turbulent Schmidt number within the boundary layer , 2000 .

[69]  Horia Hangan,et al.  Numerical simulation of wind effects on a stand-alone ground mounted photovoltaic (PV) system , 2014 .

[70]  Inmaculada Palomino,et al.  Modelling the influence of peri-urban trees in the air quality of Madrid region (Spain). , 2011, Environmental pollution.

[71]  Yoshihide Tominaga,et al.  CFD Modeling of Pollution Dispersion in Building Array: Evaluation of turbulent scalar flux modeling in RANS model using LES results , 2012 .

[72]  Guixiang Cui,et al.  Large eddy simulation of wind field and pollutant dispersion in downtown Macao , 2011 .

[73]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[74]  Bje Bert Blocken,et al.  Computational Fluid Dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations , 2015 .

[75]  Bert Blocken,et al.  CFD analysis of cross-ventilation of a generic isolated building with asymmetric opening positions : impact of roof angle and opening location , 2015 .

[76]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[77]  D. Wilcox.  Simulation of Transition with a Two-Equation Turbulence Model , 1994 .

[78]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .