Mach Number Effects on Turbine Blade Transition Length Prediction

The effect of a Mach number correction on a model for predicting the length of transition was investigated. The transition length decreases as the turbulent spot production rate increases. Many of the data for predicting the spot production rate come from low-speed flow experiments. Recent data and analysis showed that the spot production rate is affected by Mach number. The degree of agreement between analysis and data for turbine blade heat transfer without film cooling is strongly dependent on accurately predicting the length of transition. Consequently, turbine blade heat transfer data sets were used to validate a transition length turbulence model. A method for modifying models for the length of transition to account for Mach number effects is presented. The modification was made to two transition length models. The modified models were incorporated into the two-dimensional Navier–Stokes code, RVCQ3D. Comparisons were made between predicted and measured midspan surface heat transfer for stator and rotor turbine blades. The results showed that accounting for Mach number effects significantly improved the agreement with the experimental data.

[1]  N. A. Thyson,et al.  Extension of Emmons' spot theory to flows on blunt bodies , 1971 .

[2]  H. W. Emmons,et al.  The Laminar-Turbulent Transition in a Boundary Layer-Part I , 1951 .

[3]  R. E. Mayle,et al.  The 1991 IGTI Scholar Lecture: The Role of Laminar-Turbulent Transition in Gas Turbine Engines , 1991 .

[4]  J. S. Milne,et al.  End-Stage Boundary Layer Transition Models for Engineering Calculations , 1994 .

[5]  M. E. Crawford,et al.  STAN5: A program for numerical computation of two-dimensional internal and external boundary layer flows , 1976 .

[6]  Arnold M. Kuethe,et al.  Effects of Turbulence on Laminar Skin Friction and Heat Transfer , 1966 .

[7]  David E. Ashpis,et al.  Progress in Modeling of Laminar to Turbulent Transition on Turbine Vanes and Blades , 1996 .

[8]  L. D. Hylton,et al.  Analytical and Experimental Evaluation of the Heat Transfer Distribution over the Surfaces of Turbine Vanes , 1983 .

[9]  J. Whitelaw,et al.  Convective heat and mass transfer , 1966 .

[10]  Gregory J. Walker,et al.  Transition Length Prediction for Flows With Rapidly Changing Pressure Gradients , 1995 .

[11]  Rodrick V. Chima.  Application of the kappa-omega Turbulence Model to Quasi-Three-Dimensional Turbomachinery Flows , 1996 .

[12]  R. J. Boyle,et al.  An algebraic turbulence model for three-dimensional viscous flows , 1993 .

[13]  P. Bradshaw,et al.  EFFECTS OF FREE STREAM TURBULENCE , 1990 .

[14]  Rodrick V. Chima,et al.  Explicit multigrid algorithm for quasi-three-dimensional viscous flows in turbomachinery , 1987 .

[15]  R. Sorenson.  A computer program to generate two-dimensional grids about airfoils and other shapes by the use of Poisson's equation , 1980 .

[16]  K. Dullenkopf,et al.  The Effects of Incident Turbulence and Moving Wakes on Laminar Heat Transfer in Gas Turbines , 1992 .

[17]  A. Arnone,et al.  Navier-Stokes turbine heat transfer predictions using two-equation turbulence , 1992 .

[18]  Frederick F. Simon,et al.  The use of transition region characteristics to improve the numerical simulation of heat transfer in bypass transitional flows , 1995 .

[19]  C. Horstman,et al.  Hypersonic transitional boundary layers. , 1972 .

[20]  R. J. Boyle,et al.  Heat Transfer Predictions for Two Turbine Nozzle Geometries at High Reynolds and Mach Numbers , 1995 .

[21]  R. J. Boyle.  Navier–Stokes Analysis of Turbine Blade Heat Transfer , 1991 .

[22]  Gregory J. Walker,et al.  Effects of Streamwise Pressure Gradient on Turbulent Spot Development , 1995 .

[23]  Jeffrey W. Yokota,et al.  Numerical analysis of three-dimensional viscous internal flows , 1988 .

[24]  R. J. Boyle,et al.  Grid orthogonality effects on predicted turbine midspan heat transfer and performance , 1997 .

[25]  T. Arts,et al.  Aero-thermal investigation of a highly loaded transonic linear turbine guide vane cascade: A test case for inviscid and viscous flow computations , 1990 .

[26]  O. Sharma.  Momentum and thermal boundary layers on turbine airfoil suction surfaces , 1987 .

[27]  Gregory J. Walker,et al.  Effects of Free-Stream Turbulence and Adverse Pressure Gradients on Boundary Layer Transition , 1992 .

[28]  Tony Arts,et al.  Aerothermal Performance Measurements and Analysis of a Two-Dimensional High Turning Rotor Blade , 1998 .

[29]  J. P. Clark,et al.  On the propagation of naturally-occurring turbulent spots , 1994 .

[30]  M. E. McCormick,et al.  An Analysis of the Formation of Turbulent Patches in the Transition Boundary Layer , 1968 .

[31]  H. Lomax,et al.  Thin-layer approximation and algebraic model for separated turbulent flows , 1978 .

[32]  G. J. Walker.  Transitional Flow on Axial Turbomachine Blading , 1987 .

[33]  R. E. Mayle,et al.  The Role of Laminar-Turbulent Transition in Gas Turbine Engines , 1991 .

[34]  M. Liou,et al.  Navier-Stokes solution of transonic cascade flows using nonperiodic C-type grids , 1992 .

[35]  Roddam Narasimha,et al.  The laminar-turbulent transition zone in the boundary layer , 1985 .