Numerical procedure for optimizing dye-sensitized solar cells

We propose a numerical procedure consisting of a simplified physical model and a numerical method with the aim of optimizing the performance parameters of dye-sensitized solar cells (DSSCs). We calculate the real rate of absorbed photons (in the dye spectral range) Greal(x) by introducing a factor β > 1 in order to simplify the light absorption and reflection on TCO electrode. We consider the electrical transport to be purely diffusive and the recombination process only to occur between electrons from the TiO2 conduction band and anions from the electrolyte. The used numerical method permits solving the system of differential equations resulting from the physical model. We apply the proposed numerical procedure on a classical DSSC based on Ruthenium dye in order to validate it. For this, we simulate the J-V characteristics and calculate the main parameters: short-circuit current density jsc, open circuit voltage Voc, fill factor FF, and power conversion efficiency ρ. We analyze the influence of the nature of semiconductor (TiO2) and dye and also the influence of different technological parameters on the performance parameters of DSSCs. The obtained results show that the proposed numerical procedure is suitable for developing a numerical simulation platform for improving the DSSCs performance by choosing the optimal parameters.

[1]  A. Zaban,et al.  Influence of the porosity on diffusion and lifetime in porous TiO2 layers , 2006 .

[2]  Noel W. Duffy,et al.  Transport and interfacial transfer of electrons in dye-sensitized nanocrystalline solar cells , 2002 .

[3]  J. Ferber,et al.  An electrical model of the dye-sensitized solar cell , 1998 .

[4]  G. Viswanathan,et al.  Universal aspects of photocurrent-voltage characteristics in dye-sensitized nanocrystalline TiO 2 photoelectrochemical cells , 2008, 0801.4334.

[5]  K. Murakami,et al.  Improved performance of dye-sensitized solar cells using a diethyldithiocarbamate-modified TiO 2 surface , 2013 .

[6]  M. R. Mitroi,et al.  Calculation of the quantum efficiency for the absorption on confinement levels in quantum dots , 2011 .

[7]  Xudong Yang,et al.  High-efficiency dye-sensitized solar cell with a novel co-adsorbent , 2012 .

[8]  A. Mendes,et al.  Phenomenological modeling of dye-sensitized solar cells under transient conditions , 2011 .

[9]  Xudong Yang,et al.  Reliable evaluation of dye-sensitized solar cells , 2013 .

[10]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[11]  Gavin Conibeer,et al.  Silicon nanostructures for third generation photovoltaic solar cells , 2006 .

[12]  Hyun Suk Jung,et al.  Dye Sensitized Solar Cells for Economically Viable Photovoltaic Systems. , 2013, The journal of physical chemistry letters.

[13]  A. Carlo,et al.  Dye solar cells efficiency maps: a parametric study , 2011, 2011 Numerical Simulation of Optoelectronic Devices.

[14]  Yuan Wang,et al.  Enhance the optical absorptivity of nanocrystalline TiO2 film with high molar extinction coefficient ruthenium sensitizers for high performance dye-sensitized solar cells. , 2008, Journal of the American Chemical Society.

[15]  Laurentiu Fara,et al.  Organic Solar Cells Modeling and Simulation , 2013 .

[16]  H. Tsuboi,et al.  Modeling of Dye-Sensitized Solar Cells Based on TiO2 Electrode Structure Model , 2010 .

[17]  M. Grätzel.  Photoelectrochemical cells : Materials for clean energy , 2001 .

[18]  S. Hayase,et al.  Differences in characteristics of dye-sensitized solar cells containing acetonitrile and ionic liquid-based electrolytes studied using a novel model , 2006 .

[19]  Michael Grätzel,et al.  Photoelectrochemical cells , 2001, Nature.

[20]  Weifeng Zhang,et al.  Dye-Sensitized Solar Cells Based on , 2011 .

[21]  K. Ho,et al.  Gelation of ionic liquid with exfoliated montmorillonite nanoplatelets and its application for quasi-solid-state dye-sensitized solar cells. , 2011, Journal of colloid and interface science.

[22]  Optimum oxide thickness for dye-sensitized solar cells—effect of porosity and porous size. A numerical approach , 2013, Ionics.

[23]  D. Law,et al.  40% efficient metamorphic GaInP∕GaInAs∕Ge multijunction solar cells , 2007 .

[24]  Juan Bisquert,et al.  Simulation of Steady-State Characteristics of Dye- Sensitized Solar Cells and the Interpretation of the Diffusion Length , 2010 .

[25]  F. Smole,et al.  Optical and electrical modelling and characterization of dye-sensitized solar cells , 2010 .

[26]  R. Pitchumani,et al.  Analysis and design of dye-sensitized solar cell , 2012 .

[27]  Jürgen Schumacher,et al.  Coupled Optical and Electronic Modeling of Dye-Sensitized Solar Cells for Steady-State Parameter Extraction , 2011 .

[28]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[29]  Jean M. J. Fréchet,et al.  Increased light harvesting in dye-sensitized solar cells with energy relay dyes , 2009 .

[30]  J. P. Connolly,et al.  Recent results for single‐junction and tandem quantum well solar cells , 2011 .

[31]  Peter Lund,et al.  Device Physics of Dye Solar Cells , 2010, Advanced materials.