Impact-modified nylon 6/polypropylene blends: 3. Deformation mechanisms

[1]  Andrea Lazzeri,et al.  Dilatational bands in rubber-toughened polymers , 1993, Journal of Materials Science.

[2]  R. Mülhaupt,et al.  Comparison of maleic anhydride-grafted poly(propylene) with maleic anhydride-grafted polystyrene-block-poly(ethene-co-but-1-ene)-block-polystyrene as blend compatibilizers of poly(propylene)/polyamide-6 blends , 1993 .

[3]  L. Pottick,et al.  Modification and compatibilization of nylon 6 with functionalized styrenic block copolymers , 1993 .

[4]  Jaehwan Lee,et al.  Influence of the mechanical properties of the dispersed phase upon the behaviour of nylon/rubber blends : crosslinking effect , 1993 .

[5]  J. Seppälä,et al.  Effects of compatibilizers on the properties of polyamide/polypropylene blends , 1992 .

[6]  H. Sue.  Study of rubber‐modified brittle epoxy systems. Part I: Fracture toughness measurements using the double‐notch four‐point‐bend method , 1991 .

[7]  D. S. Parker,et al.  Toughening mechanisms in core-shell rubber modified polycarbonate , 1990 .

[8]  B. M. Culbertson.  Multiphase Macromolecular Systems , 1990 .

[9]  C. Bucknall,et al.  Rubber toughening of plastics , 1989 .

[10]  F. Speroni,et al.  Mechanisms of energy dissipation during impact in toughened polyamides: a SEM analysis , 1989 .

[11]  S. Y. Hobbs,et al.  Deformation mechanisms in toughened poly(phenylene oxide)-polyamide blends , 1989 .

[12]  A. Yee,et al.  Toughening mechanisms in a multi-phase alloy of nylon 6,6/polyphenylene oxide , 1989 .

[13]  C. Chou,et al.  Ductile-to-brittle transition of rubber-modified polypropylene , 1988 .

[14]  V. H. Watkins,et al.  Toughened blends of poly(butylene terephthalate) and BPA polycarbonate , 1988 .

[15]  J. W. Barlow,et al.  Deformation behavior of HDPE/(PEC/PS)/SEBS blends , 1988 .

[16]  Souheng Wu.  A generalized criterion for rubber toughening: The critical matrix ligament thickness , 1988 .

[17]  A. Yee,et al.  Toughening mechanisms in elastomer-modified epoxies , 1986 .

[18]  A. Yee,et al.  Toughening mechanisms in elastomer-modified epoxies , 1986 .

[19]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[20]  D. Uhlmann,et al.  The rubber particle size dependence of crazing in polypropylene , 1985 .

[21]  D. Uhlmann,et al.  Rubber‐toughening in polypropylene , 1985 .

[22]  D. Uhlmann,et al.  CRAZING IN POLYPROPYLENE. , 1985 .

[23]  V. H. Watkins,et al.  Toughened nylon resins , 1983 .

[24]  W. Heckmann,et al.  Improved low temperature impact strength of polypropylene by modification with polyethylene , 1983 .

[25]  C. Bucknall,et al.  Rubber-toughening of plastics , 1982 .

[26]  A. Yee,et al.  The effect of strain rate on the toughening mechanisms of rubber‐modified plastics , 1981 .

[27]  W. J. Coumans,et al.  Dilatometer for use in tensile tests , 1980 .

[28]  E. A. Flexman.  Impact behavior of nylon‐66 compositions: Ductile‐brittle transitions , 1979 .

[29]  A. Yee.  The yield and deformation behaviour of some polycarbonate blends , 1977 .

[30]  D. R. Paul,et al.  Impact-modified nylon 6/polypropylene blends: 2. Effect of reactive functionality on morphology and mechanical properties , 1995 .

[31]  C. Bucknall,et al.  A model for particle cavitation in rubber-toughened plastics , 1994, Journal of Materials Science.

[32]  A. Yee,et al.  Study of fracture mechanisms of multiphase polymers using the double-notch four-point-bending method , 1993, Journal of Materials Science.

[33]  R. J. Gaymans,et al.  Nylon 6-rubber blends: 9. Crack initiation and propagation under impact conditions , 1993 .

[34]  A. Yee,et al.  Interfacial adhesion and toughening mechanisms in an alloy of polycarbonate/polyethylene , 1992 .

[35]  J. J. Aartsen,et al.  Strain-rate dependence of interfacial adhesion in particle-reinforced polymers , 1991 .

[36]  A. Yee,et al.  Failure mechanisms in alloy of polyamide 6,6/polyphenylene oxide under severe conditions , 1991, Journal of Materials Science.

[37]  Masayoshi Okubo,et al.  Makromol Chem-Macromol Symp , 1990 .

[38]  R. J. Gaymans,et al.  Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism , 1989 .

[39]  R. Hertzberg,et al.  Effects of rubbery phase and absorbed water on impact-modified nylon 66 , 1986 .

[40]  W. Heckmann,et al.  Mode of deformation in rubber-modified polyamide , 1985 .

[41]  H. Kausch.  Crazing in polymers , 1983 .

[42]  W. J. Coumans,et al.  Dilatometric investigation of deformation mechanisms in polystyrene-polyethylene block copolymer blends: correlation between Poisson ratio and adhesion , 1980 .