Improvement of surface flashover performance in vacuum by co-firing Mo/Al2O3 cermets and Al2O3 ceramics

A new insulation structure of Mo/Al<sub>2</sub>O<sub>3</sub> cermet-Al<sub>2</sub>O<sub>32</sub> ceramic-Mo/Al<sub>2</sub>O<sub>3</sub> cermet was designed to improve the surface flashover performance in vacuum through co-firing, where the volume addition of metal Mo was managed from 2 vol% to 50 vol% and there could exist one or two layers with different Mo addition in Mo/Al2O3 cermet. The influences of Mo addition of Mo/Al<sub>2</sub>O<sub>3</sub> cermet on the surface flashover voltage in vacuum of samples were experimentally investigated, indicating that the surface flashover voltage of three and five-layer structures were improved by 77% and 117%, respectively. Through electrostatic field simulation, it was found that the improvement is caused by the weakening of the electric field at vacuum-insulator-cathode triple junction. On the basis of an in-depth investigation, it was also concluded that Mo particles of Mo/Al<sub>2</sub>O<sub>3</sub> cermet layer can decline the surface charging and secondary electron emission near the triple junction. Then with a further increase of Mo addition, the decreasing trend of flashover voltage after the growing has been reasonably explained by investigating the configuration of Mo particles in Mo/Al<sub>2</sub>O<sub>3</sub> cermet.

[1]  Shengtao Li,et al.  Improvement of Surface Flashover Performance in Vacuum of A-B-A Insulator by Adopting ZnO Varistor Ceramics as Layer A , 2010, IEEE Transactions on Plasma Science.

[2]  H. Okubo,et al.  Application of functionally graded material for solid insulator in gaseous insulation system , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  D. Xiao,et al.  Influence of Cr/sub 2/O/sub 3/ and MnO additives on the surface properties of alumina insulators , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[4]  M. Frary,et al.  Connectivity and percolation behaviour of grain boundary networks in three dimensions , 2005 .

[5]  O. Sbaizero,et al.  Electrical conductivity of an insulator matrix (alumina) and conductor particle (molybdenum) composites , 2003 .

[6]  M. Fukuda,et al.  Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum , 2002, 20th International Symposium on Discharges and Electrical Insulation in Vacuum.

[7]  Hitoshi Okubo,et al.  Charging characteristics and electric field distribution on alumina as affected by triple junctions in vacuum , 2002 .

[8]  Jingchun Wang,et al.  The influence of sintering temperature on the flashover performance of alumina insulators in vacuum , 2001, Proceedings of 2001 International Symposium on Electrical Insulating Materials (ISEIM 2001). 2001 Asian Conference on Electrical Insulating Diagnosis (ACEID 2001). 33rd Symposium on Electrical and Ele.

[9]  J. Pojman,et al.  Preparation of functionally gradient materials via frontal polymerization , 2000 .

[10]  Andreas A. Neuber,et al.  Initiation of high power microwave dielectric interface breakdown , 1999 .

[11]  A. Neuber,et al.  The role of outgassing in surface flashover under vacuum , 1999, Digest of Technical Papers. 12th IEEE International Pulsed Power Conference. (Cat. No.99CH36358).

[12]  Chen Li,et al.  Dielectric surface preflashover processes in vacuum , 1994 .

[13]  H. C. Miller.  Flashover of insulators in vacuum: review of the phenomena and techniques to improved holdoff voltage , 1993 .

[14]  M. Koizumi,et al.  Functionally Gradient Materials , 1993 .

[15]  Masayuki Niino,et al.  Recent development status of functionally gradient materials. , 1990 .

[16]  R. G. Bommakanti,et al.  Influence of mechanical grinding and polishing operations of brittle polycrystalline alumina on the pulsed surface flashover performance , 1990 .

[17]  H. Miller,et al.  Improving the Voltage Holdoff Performance of Alumina Insulators in Vacuum Through Quasimetallizing , 1980, IEEE Transactions on Electrical Insulation.

[18]  H. C. Miller,et al.  The effect of Mn/Ti surface treatment on voltage‐holdoff performance of alumina insulators in vaccum , 1978 .

[19]  T. Sudarshan,et al.  Prebreakdown Processes Associated with Surface Flashover of Solid Insulators in Vacuum , 1977, IEEE Transactions on Electrical Insulation.

[20]  T. Sudarshan,et al.  The Effect of Chromium Oxide Coatings on Surface Flashover of Alumina Spacers in Vacuum , 1976, IEEE Transactions on Electrical Insulation.

[21]  P. H. Dawson,et al.  Secondary Electron Emission Yields of some Ceramics , 1966 .