Ultrasonic guided waves for nondestructive evaluation/structural health monitoring of trusses

Ultrasonic guided waves (UGWs) are particularly effective in those nondestructive evaluation and structural health monitoring applications that benefit from built-in transduction, moderately large inspection ranges and high sensitivity to small flaws. This paper describes a method to detect cracks in large trusses that combines the advantages of UGWs with the extraction of defect-sensitive features to perform a multivariate diagnosis of damage. The proposed algorithm was applied to the guided waves propagating along one of the main chords of a dismantled overhead sign support structure. The probing hardware consisted of a data acquisition system that controlled the generation and detection of ultrasonic signals by means of piezoelectric transducers made of lead zirconate titanate. The effectiveness of the proposed approach to diagnose the presence of an artificial defect around the welded joint between one main chord and a diagonal member of the truss structure is explained.

[1]  M. J. S. Lowe,et al.  PROPAGATION OF FEATURE GUIDED WAVES IN A PLATE WITH A WELDED JOINT , 2009 .

[2]  Joseph L. Rose,et al.  Ultrasonic guided wave NDE for piping , 1996 .

[3]  Charles R. Farrar,et al.  The fundamental axioms of structural health monitoring , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  R. M. Sanderson,et al.  The application of finite element modelling to guided ultrasonic waves in rails , 2002 .

[5]  Ser Tong Quek,et al.  Detection of cracks in cylindrical pipes and plates using piezo-actuated Lamb waves , 2005 .

[6]  Zongqi Sun,et al.  Guided wave flexural mode tuning and focusing for pipe testing , 2003 .

[7]  V. Giurgiutiu,et al.  In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection. , 2008, Ultrasonics.

[8]  Keith Worden,et al.  EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART II. NOVELTY DETECTION ON A GNAT AIRCRAFT , 2003 .

[9]  L. Gavric.  Computation of propagative waves in free rail using a finite element technique , 1995 .

[10]  I. Charles Ume,et al.  Three-dimensional ray tracing of laser ultrasound for weld penetration sensing , 2004 .

[11]  B. Kozy,et al.  Bearing Capacity in Long-Span Tubular Truss Chords , 2007 .

[12]  Peter Cawley,et al.  The Guiding of Ultrasound by a Welded Joint in a Plate , 2007 .

[13]  Ivan Bartoli,et al.  A semi-analytical finite element formulation for modeling stress wave propagation in axisymmetric damped waveguides , 2008 .

[14]  Li Zhang,et al.  Ultrasonic Guided Wave Focusing Beyond Welds in a Pipeline , 2006 .

[15]  Lingyu Yu,et al.  Lamb Wave-Mode Tuning of Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2007 .

[16]  Peter Cawley,et al.  The excitation of Lamb waves in pipes using dry-coupled piezoelectric transducers , 1996 .

[17]  J. Rose,et al.  Guided wave propagation and mode differentiation in hollow cylinders with viscoelastic coatings. , 2008, The Journal of the Acoustical Society of America.

[18]  Mohamed A. El-Sharkawi,et al.  Elliptical novelty grouping for on-line short-turn detection of excited running rotors , 1999 .

[19]  P. Cawley,et al.  Rapid, Long Range Inspection of Chemical Plant Pipework Using Guided Waves , 2001 .

[20]  Alessandro Marzani,et al.  Time–transient response for ultrasonic guided waves propagating in damped cylinders , 2008 .

[21]  J. Rose,et al.  Guided wave propagation in an elastic hollow cylinder coated with a viscoelastic material , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[22]  Patrick Gaydecki,et al.  An axisymmetric guided wave encoded system for flood detection of oil rig cross-beams , 2005 .

[23]  A. G. Roosenbrand,et al.  The reflection of the fundamental torsional mode from cracks and notches in pipes. , 2003, The Journal of the Acoustical Society of America.

[24]  Francesco Lanza di Scalea,et al.  Wavelet-based outlier analysis for guided wave structural monitoring: Application to multi-wire strands , 2007 .

[25]  J. Rose,et al.  Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example. , 2003, Ultrasonics.

[26]  Ivan Bartoli,et al.  Digital signal processing for rail monitoring by means of ultrasonic guided waves , 2007 .

[27]  Keith Worden,et al.  DAMAGE DETECTION USING OUTLIER ANALYSIS , 2000 .

[28]  Hoon Sohn,et al.  An unsupervised learning algorithm for fatigue crack detection in waveguides , 2009 .

[29]  P. Wilcox,et al.  The effect of load on guided wave propagation. , 2007, Ultrasonics.

[30]  Francesco Simonetti,et al.  Feasibility study of sludge and blockage detection inside pipes using guided torsional waves , 2007 .

[31]  Charles R. Farrar,et al.  Novelty detection in a changing environment: Regression and interpolation approaches , 2002 .

[32]  M. Lowe,et al.  DISPERSE: A GENERAL PURPOSE PROGRAM FOR CREATING DISPERSION CURVES , 1997 .

[33]  Joseph L. Rose,et al.  A guided wave inspection technique for nuclear steam generator tubing , 1994 .

[34]  David Thompson,et al.  EXPERIMENTAL ANALYSIS OF WAVE PROPAGATION IN RAILWAY TRACKS , 1997 .

[35]  Ivan Bartoli,et al.  Modeling wave propagation in damped waveguides of arbitrary cross-section , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[36]  M. Lowe,et al.  The Reflection of Guided Waves From Circumferential Notches in Pipes , 1998 .

[37]  Hoon Sohn,et al.  Statistical Damage Classification Under Changing Environmental and Operational Conditions , 2002 .

[38]  Vic Barnett,et al.  Outliers in Statistical Data , 1980 .

[39]  Mark D. Bowman,et al.  Fatigue Strength and Evaluation of Double-Mast Arm Cantilevered Sign Structures , 2005 .

[40]  Keith Worden,et al.  The use of pseudo-faults for novelty detection in SHM , 2010 .

[41]  Peter B. Nagy,et al.  Ultrasonic NDE of solid-state bonds: Inertia and friction welds , 1988 .

[42]  M. Lowe,et al.  The Mode Conversion of a Guided Wave by a Part-Circumferential Notch in a Pipe , 1998 .

[43]  Victor Giurgiutiu,et al.  Piezoelectric wafer active sensors for in situ ultrasonic‐guided wave SHM , 2008 .

[44]  J. Ditri.  Utilization of guided elastic waves for the characterization of circumferential cracks in hollow cylinders , 1994 .

[45]  Keith Worden,et al.  STRUCTURAL FAULT DETECTION USING A NOVELTY MEASURE , 1997 .

[46]  Yang Xiao-dong,et al.  Research on transducer and frequency of ultrasonic guided waves in urban pipe inspection , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[47]  M.J.S. Lowe,et al.  Matrix techniques for modeling ultrasonic waves in multilayered media , 1995, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[48]  Tribikram Kundu,et al.  Pipe Wall Damage Detection in Buried Pipes Using Guided Waves , 2009 .

[49]  Tribikram Kundu,et al.  Underwater Pipeline Inspection Using Guided Waves , 2001, NDE Challenges of the 21st Century: Theory to Practice.

[50]  Keith Worden,et al.  Detection of defects in composite plates using Lamb waves and novelty detection , 2000, Int. J. Syst. Sci..

[51]  M. Hinders,et al.  Guided wave helical ultrasonic tomography of pipes. , 2003, The Journal of the Acoustical Society of America.