Hybrid laser arc welding: State-of-art review

Abstract Hybrid laser arc welding simultaneously utilizes the arc welding and the laser welding, in a common interaction zone. The synergic effects of laser beam and eclectic arc in the same weld pool results in an increase of welding speed and penetration depth along with the enhancement of gap bridging capability and process stability. This paper presents the current status of this hybrid technique in terms of research, developments and applications. Effort is made to present a comprehensive technical know-how about this process through a systematic review of research articles, industrial catalogues, technical notes, etc. In the introductory part of the review, an overview of the hybrid laser arc welding is presented, including operation principle, process requirements, historical developments, benefits and drawbacks of the process. This is followed by a detailed discussion on control parameters those govern the performance of hybrid laser arc welding process. Thereafter, a report of improvements of performance and weld qualities achieved by using hybrid welding process is presented based on review of several research papers. The succeeding sections furnish the examples of industrial applications and the concluding remarks.

[1]  Cheolhee Kim,et al.  CO2 laser-micro plasma arc hybrid welding for galvanized steel sheets , 2011 .

[2]  Xiaoyan Zeng,et al.  Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding , 2010 .

[3]  Liming Liu,et al.  Investigation of corrosion behavior of Mg-steel laser-TIG hybrid lap joints , 2012 .

[4]  A. Kaplan,et al.  Undercuts in Laser Arc Hybrid Welding , 2014 .

[5]  Hybrid laser welding techniques for enhanced welding efficiency , 1996 .

[6]  Ming Gao,et al.  Effects of welding parameters on melting energy of CO2 laser–GMA hybrid welding , 2006 .

[7]  U. Dilthey,et al.  Perspectives offered by combining a laser beam with arc welding procedures , 2002 .

[8]  Zhenglong Lei,et al.  Experimental study on welding characteristics of CO2 laser TIG hybrid welding process , 2006 .

[9]  Edward William Reutzel,et al.  Joining Pipe with the Hybrid Laser-GMAW Process: Weld Test Results and Cost Analysis , 2006 .

[10]  J. Ready.  Industrial Applications of Lasers , 1978 .

[11]  William M. Steen,et al.  Arc augmented laser processing of materials , 1980 .

[12]  Giuseppe Casalino,et al.  Effect of power distribution on the weld quality during hybrid laser welding of an Al-Mg alloy , 2015 .

[13]  Xinyu Shao,et al.  Parameters optimization of hybrid fiber laser-arc butt welding on 316L stainless steel using Kriging model and GA , 2016 .

[14]  Liu Fengde,et al.  Analysis of droplet transfer mode and forming process of weld bead in CO2 laser–MAG hybrid welding process , 2012 .

[15]  Akihide Yoshitake,et al.  Development of laser-arc hybrid welding , 2002 .

[16]  C. Bagger,et al.  Closing the weld gap with laser/mig hybrid welding process , 2003 .

[17]  Wiesława Piekarska,et al.  Three-dimensional model for numerical analysis of thermal phenomena in laser–arc hybrid welding process , 2011 .

[18]  K. Nilsson,et al.  Parameter Influence in CO2-laser/MIG Hybrid Welding , 2003 .

[19]  Herbert Staufer,et al.  Laser hybrid welding in the automotive industry , 2007 .

[20]  Zhang Shenghai,et al.  The technology and welding joint properties of hybrid laser-tig welding on thick plate , 2013 .

[21]  Weineng Liao,et al.  Study of metal transfer in CO2 laser+GMAW-P hybrid welding using argon–helium mixtures , 2014 .

[22]  Antti Salminen,et al.  Influence of Filler Wire Feed Rate in Laser-Arc Hybrid Welding of T-butt Joint in Shipbuilding Steel with Different Optical Setups , 2015 .

[23]  Eugen Cicala,et al.  The use of exploratory experimental designs combined with thermal numerical modelling to obtain a predictive tool for hybrid laser/MIG welding and coating processes , 2011 .

[24]  Luca Tomesani,et al.  The influence of arc transfer mode in hybrid laser-mig welding , 2007 .

[25]  Radovan Kovacevic,et al.  Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process , 2011 .

[26]  Z. Lei,et al.  Numerical simulation of droplet shapes in laser-MIG hybrid welding , 2017 .

[27]  Z. Zeng,et al.  Numerical and experiment analysis of residual stress on magnesium alloy and steel butt joint by hybrid laser-TIG welding , 2011 .

[28]  Chunming Wang,et al.  Microstructure and mechanical properties of laser-arc hybrid welding joint of GH909 alloy , 2016 .

[29]  W. V. Vaidya,et al.  Strength and Fatigue Resistance of Laser-MIG Hybrid Butt Welds of an Airframe Aluminium Alloy AA6013 , 2006 .

[30]  Minghua Chen,et al.  Effect of keyhole characteristics on porosity formation during pulsed laser-GTA hybrid welding of AZ31B magnesium alloy , 2017 .

[31]  R. Kovacevic,et al.  Hybrid laser-arc welding of advanced high-strength steel , 2014 .

[32]  Chuang Cai,et al.  Influence of laser on the droplet behavior in short-circuiting, globular, and spray modes of hybrid fiber laser-MIG welding , 2016 .

[33]  Peter Seyffarth,et al.  Laser-Arc Processes and Their Applications in Welding and Material Treatment , 2002 .

[34]  P. Romero,et al.  Laser-tig hybrid welding of very thin austenitic stainless steel sheets , 2005 .

[35]  Hongtao Ding,et al.  Effects of relative positioning of energy sources on weld integrity for hybrid laser arc welding , 2016 .

[36]  Uwe Reisgen,et al.  Robot application for laser-GMA hybrid welding in shipbuilding , 2007 .

[37]  Hui Huang,et al.  Residual stresses in laser-arc hybrid welded butt-joint with different energy ratios , 2015 .

[38]  Cui Li,et al.  Fiber laser-GMA hybrid welding of commercially pure titanium , 2009 .

[39]  X. Zhan,et al.  Comparison between hybrid laser-MIG welding and MIG welding for the invar36 alloy , 2016 .

[40]  Radovan Kovacevic,et al.  3D finite element modeling of the thermally induced residual stress in the hybrid laser/arc welding of lap joint , 2010 .

[41]  Eugen Cicala,et al.  The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach , 2014 .

[42]  H. Bhadeshia,et al.  Characteristics of high-power diode–laser welds for industrial assembly , 2003 .

[43]  J. Ruge,et al.  Wechselwirkungen zwischen WIG-Schweißlichtbogen und fokussiertem Laserstrahl , 1990 .

[44]  Dirk Petring,et al.  RECENT PROGRESS AND INNOVATIVE SOLUTIONS FOR LASER-ARC HYBRID WELDING , 2004 .

[45]  Ming Gao,et al.  Process and joint characterizations of laser–MIG hybrid welding of AZ31 magnesium alloy , 2012 .

[46]  Yanyan Zhu,et al.  A comparative study of laser beam welding and laser–MIG hybrid welding of Ti–Al–Zr–Fe titanium alloy , 2011 .

[47]  Liming Liu,et al.  Investigation of the corrosion behaviour of laser-TIG hybrid welded Mg alloys , 2010 .

[48]  Suck-Joo Na,et al.  Numerical analysis of hybrid plasma generated by Nd:YAG laser and gas tungsten arc , 2011 .

[49]  A. Kaplan,et al.  An investigation on stability of laser hybrid arc welding , 2013 .

[50]  Xiaoyan Zeng,et al.  Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy , 2016 .

[51]  Radovan Kovacevic,et al.  Hybrid laser/arc welding of advanced high strength steel in different butt joint configurations , 2014 .

[52]  G. Gou,et al.  Hybrid laser-Metal Inert Gas welding of Al–Mg–Si alloy joints: Microstructure and mechanical properties , 2014 .

[53]  Hongtao Ding,et al.  Analysis of plasma characteristics and conductive mechanism of laser assisted pulsed arc welding , 2017 .

[54]  Yan-bin Chen,et al.  Laser-tungsten inert gas hybrid welding of dissimilar metals AZ31B Mg alloys to Zn coated steel , 2013 .

[55]  G. Casalino,et al.  Arc Leading Versus Laser Leading in the Hybrid Welding of Aluminium Alloy Using a Fiber Laser , 2013 .

[56]  A. Salminen,et al.  Fiber laser-MIG hybrid welding of 5 mm 5083 aluminum alloy , 2016 .

[57]  K. Magee,et al.  Laser assisted gas metal arc weld characteristics , 1990 .

[58]  Janusz Adamiec,et al.  Fibre laser usage in boiler elements' production for the power industry , 2010 .

[59]  You Chul Kim,et al.  Analysis of residual stress on AH32 butt joint by hybrid CO2 laser-GMA welding , 2010 .

[60]  Kezhao Zhang,et al.  Microstructure characteristics and mechanical properties of laser-TIG hybrid welded dissimilar joints of Ti–22Al–27Nb and TA15 , 2015 .

[61]  Liming Liu,et al.  Effect of electric arc on laser keyhole behavior based on direct observation during low power pulsed laser–arc hybrid welding process , 2013 .

[62]  Claus Emmelmann,et al.  Development of Plasma-Laser-Hybrid Welding Process , 2011 .

[63]  A. Bîrdeanu,et al.  Pulsed LASER-(micro)TIG hybrid welding: Process characteristics , 2012 .

[64]  H. B. Cary,et al.  Modern Welding Technology , 1979 .

[65]  Christian Walz,et al.  Hybrid Welding of Steel For Offshore Applications , 2001 .

[66]  P. Masson,et al.  Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration , 2017 .

[67]  J. F. Porter,et al.  Laser-assisted gas metal arc welding of 25-mm-thick HY-80 plate , 2001 .

[68]  Chuansong Wu,et al.  Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding , 2017 .

[69]  M. Wahba,et al.  Hybrid welding with fiber laser and CO2 gas shielded arc , 2015 .

[70]  Houzheng Wu,et al.  Plasma augmented laser welding of 6 mm steel plate , 2007 .

[71]  Weineng Liao,et al.  The effect of the welding direction on the plasma and metal transfer behavior of CO2 laser+GMAW-P hybrid welding processes , 2014 .

[72]  Xiaoyan Zeng,et al.  Relationship between pool characteristic and weld porosity in laser arc hybrid welding of AA6082 aluminum alloy , 2017 .

[73]  Gao Ming,et al.  Effects of gas shielding parameters on weld penetration of CO2 laser-TIG hybrid welding , 2007 .

[74]  G. Gou,et al.  Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al–Mg alloy joints , 2014 .

[75]  Hans-Åke Häggblad,et al.  The influence of surface geometry and topography on the fatigue cracking behaviour of laser hybrid welded eccentric fillet joints , 2010 .

[76]  Flemming Ove Olsen,et al.  Review of laser hybrid welding , 2005 .

[77]  W. Piekarska,et al.  Modeling of thermal phenomena in single laser beam and laser-arc hybrid welding processes using projection method , 2013 .

[78]  R. Poprawe,et al.  Progress in laser-mag hybrid welding of high-strength steels up to 30 mm thickness , 2007 .

[79]  A. Utsumi,et al.  TIG OR MIG ARC AUGMENTED LASER WELDING OF THICK MILD STEEL PLATE , 1988 .

[80]  P. Masson,et al.  Analysis of hybrid Nd:Yag laser-MAG arc welding processes. , 2011 .

[81]  P. Sanders,et al.  High power Nd:YAG and CO2 laser welding of magnesium , 1999 .

[82]  G. Casalino,et al.  Study on arc and laser powers in the hybrid welding of AA5754 Al-alloy , 2014 .

[83]  G. Song,et al.  The influence of laser pulse waveform on laser-TIG hybrid welding of AZ31B magnesium alloy , 2011 .

[84]  Huan Li,et al.  Coupling mechanism of laser and arcs of laser-twin-arc hybrid welding and its effect on welding process , 2013 .

[85]  P. Masson,et al.  3D heat transfer model of hybrid laser Nd : Yag-MAG welding of a S355 steel and experimental validation , 2011 .

[86]  R. Poprawe,et al.  Investigations and applications of laser-arc hybrid welding from thin sheets up to heavy section components , 2003 .

[87]  Masao Watanabe,et al.  Latest MIG, TIG arc-YAG laser hybrid welding systems for various welding products , 2003, International Congress on Laser Advanced Materials Processing.

[88]  Xiaoyan Zeng,et al.  Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensitic stainless steel , 2017 .

[89]  Ji-cai Feng,et al.  Influence of laser power on microstructure and mechanical properties of fiber laser-tungsten inert gas hybrid welded Mg/Cu dissimilar joints , 2015 .

[90]  Flemming Ove Olsen,et al.  Comparison of plasma, metal inactive gas (MIG) and tungsten inactive gas (TIG) processes for laser hybrid welding , 2003 .

[91]  P. Prangnell,et al.  Laser and Hybrid Laser-MIG Welding of 6.35 and 12.7mm Thick Aluminium Aerospace Alloy , 2006 .

[92]  W. Piekarska,et al.  Numerical Simulation of Thermal Phenomena and Phase Transformations in Laser-Arc Hybrid Welded Joints , 2011 .

[93]  Jianxun Zhang,et al.  Single pass hybrid laser–MIG welding of 4-mm thick copper without preheating , 2015 .

[94]  Leonardo Orazi,et al.  The influence of process parameters on porosity formation in hybrid LASER-GMA welding of AA6082 aluminum alloy , 2012 .

[95]  R. Kovacevic,et al.  Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration , 2014 .

[96]  D. Petring,et al.  Joining of thick section steels using hybrid laser welding , 2008 .

[97]  Liming Liu,et al.  A New Laser-Arc Hybrid Welding Technique Based on Energy Conservation , 2006 .

[98]  Ryoji Ohashi,et al.  Improvements of welding characteristics of aluminum alloys with YAG laser and TIG arc hybrid system , 2003, International Congress on Laser Advanced Materials Processing.

[99]  T. Graf,et al.  Laser-hybrid welding drives VW improvements , 2003 .

[100]  G. M. Eboo,et al.  Arc augmented laser welding , 1979 .

[101]  Shuangyue Liu,et al.  Experimental investigation on arc characteristic and droplet transfer in CO2 laser–metal arc gas (MAG) hybrid welding , 2013 .

[103]  R. Kovacevic,et al.  Laser-based welding of 17-4 PH martensitic stainless steel in a tubular butt joint configuration with a built-in backing bar , 2016 .

[104]  B. Shanmugarajan,et al.  Shielding gas effect on weld characteristics in arc-augmented laser welding process of super austenitic stainless steel , 2013 .

[105]  R. Kovacevic,et al.  Hybrid laser/arc welding of advanced high strength steel to aluminum alloy by using structural transition insert , 2015 .

[106]  U. Füssel,et al.  Laser-assisted plasma arc welding of stainless steel , 2013 .

[107]  Liming Liu,et al.  Interactions between laser and arc plasma during laser-arc hybrid welding of magnesium alloy , 2011 .

[108]  Yan-bin Chen,et al.  Microstructure and mechanical properties of a thick-section high-strength steel welded joint by novel double-sided hybrid fibre laser-arc welding , 2013 .

[109]  F. Möller,et al.  Interaction Effects between Laser Beam and Plasma Arc in Hybrid Welding of Aluminum , 2013 .

[110]  Liming Liu,et al.  Improvement of laser keyhole formation with the assistance of arc plasma in the hybrid welding process of magnesium alloy , 2009 .