Elastohydrodynamic lubrication of real surfaces

The paper describes recent experimental and theoretical work on scuffing using a two disc machine. The machine was designed to simulate the operating conditions of high speed, high temperature aerospace gears. A key feature of the rig is the use of axially finished discs to simulate the orientation of finish on real gears, and crowning which avoids the complications of misalignment and unquantifiable edge effects. Scuffing has been studied using both conventionally ground and superfinished surfaces. The latter process is found to give a significant improvement in scuffing load together with reduced friction and bulk temperatures. Corresponding theoretical work is aimed at directly simulating the experimental conditions with the eventual objective of predicting circumstances under which failure of the physical mechanism of micro elastohydrodynamic lubrication (micro EHL) will occur. A line contact micro EHL analysis of typical disc machine conditions shows the mechanism to be extremely robust in theory, but a more recent model which takes account of film thinning at the edges of a real contact due to sideways leakage of oil in valley features of roughness shows promise as a means of explaining film collapse and scuffing failure.

[1]  R. W. Snidle,et al.  The failure of elastohydrodynamic lubrication , 1984, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[2]  A. Dyson,et al.  The Failure of Elastohydrodynamic Lubrication of Circumferentially Ground Discs , 1976 .

[3]  Henry Peredur Evans,et al.  Simulation of Elastohydrodynamic Contacts Between Rough Surfaces , 1992 .

[4]  Duncan Dowson,et al.  A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts. I. Direction of lubricant entrainment coincident with the major axis of the Hertzian contact ellipse , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[5]  Henry Peredur Evans,et al.  Micro-Elastohydrodynamic Lubrication of an Elliptical Contact With Transverse and Three-Dimensional Sinusoidal Roughness , 1989 .

[6]  T. F. Conry,et al.  The Effects of Surface Irregularities on the Elastohydrodynamic Lubrication of Sliding Line Contacts. Part I—Single Irregularities , 1984 .

[7]  Henry Peredur Evans,et al.  Scuffing Failure of Steel Discs: Conditions for the Failure of Elastohydrodynamic Lubrication , 1990 .

[8]  J A Greenwood,et al.  The Behaviour of Transverse Roughness in EHL Contacts , 1994 .

[9]  R. Bosma,et al.  The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts , 1988 .

[10]  A. Jackson,et al.  On the Pressure Rippling and Roughness Deformation in Elastohydrodynamic Lubrication of Rough Surfaces , 1993 .

[11]  Henry Peredur Evans,et al.  Conditions for Scuffing Failure of Ground and Superfinished Steel Disks at High Sliding Speeds Using a Gas Turbine Engine Oil , 1995 .

[12]  T. F. Conry,et al.  A Reynolds-Eyring Equation for Elastohydrodynamic Lubrication in Line Contacts , 1987 .

[13]  R W Snidle,et al.  A Simple Method of Elastic Contact Simulation , 1994 .