Augmentation of multi-stage Tesla valve design cold plate with reverse flow to enhance thermal management of pouch batteries

[1]  Münür Sacit Herdem,et al.  A Cnn-Abc Model for Estimation and Optimization of Heat Generation Rate and Voltage Distributions of Lithium-Ion Batteries for Electric Vehicles , 2022, SSRN Electronic Journal.

[2]  M. Fowler,et al.  Thermal Modelling Utilizing Multiple Experimentally Measurable Parameters , 2022, Batteries.

[3]  M. Fowler,et al.  Enhanced optimization algorithm for the structural design of an air‐cooled battery pack considering battery lifespan and consistency , 2022, International Journal of Energy Research.

[4]  R. Aravind Sekhar,et al.  Distance to empty soft sensor for ford escape electric vehicle , 2022, Results in Control and Optimization.

[5]  K. Monika,et al.  Comparative assessment among several channel designs with constant volume for cooling of pouch-type battery module , 2022, Energy Conversion and Management.

[6]  M. Sharifpur,et al.  Study of the effect of the aspect ratio of a cylindrical lithium-ion battery enclosure in an air-cooled thermal management system , 2022, Journal of Energy Storage.

[7]  Xiangwei Lin,et al.  Experimental investigation of form-stable phase change material with enhanced thermal conductivity and thermal-induced flexibility for thermal management , 2021, Applied Thermal Engineering.

[8]  Yu Zhang,et al.  A hybrid thermal management system with liquid cooling and composite phase change materials containing various expanded graphite contents for cylindrical lithium-ion batteries , 2021, Applied Thermal Engineering.

[9]  Zhichun Liu,et al.  Experimental study of flat-disk loop heat pipe with R1233zd(E) for cooling terrestrial electronics , 2021 .

[10]  S. Roy,et al.  A numerical analysis on multi-stage Tesla valve based cold plate for cooling of pouch type Li-ion batteries , 2021 .

[11]  S. Roy,et al.  Selection of an Ideal Coolant to Ward Off the Thermal Runaway of a Pouch Type Li-Ion Battery Module , 2021 .

[12]  Lin Su,et al.  Lightweight liquid cooling based thermal management to a prismatic hard-cased lithium-ion battery , 2021 .

[13]  S. Roy,et al.  An improved mini-channel based liquid cooling strategy of prismatic LiFePO4 batteries for electric or hybrid vehicles , 2021 .

[14]  Roydon Andrew Fraser,et al.  High Reynold’s Number Turbulent Model for Micro-Channel Cold Plate Using Reverse Engineering Approach for Water-Cooled Battery in Electric Vehicles , 2020 .

[15]  Xiaoming Xu,et al.  Numerical study and optimizing on cold plate splitter for lithium battery thermal management system , 2020, Applied Thermal Engineering.

[16]  G. Xie,et al.  The performance management of a Li-ion battery by using tree-like mini-channel heat sinks: Experimental and numerical optimization , 2019 .

[17]  Jie Zhang,et al.  Design a J-type air-based battery thermal management system through surrogate-based optimization , 2019, Applied Energy.

[18]  M. S. Kim,et al.  Thermal analysis and pack level design of battery thermal management system with liquid cooling for electric vehicles , 2019, Energy Conversion and Management.

[19]  Yan Ran,et al.  Design optimization of bifurcating mini-channels cooling plate for rectangular Li-ion battery , 2019, International Journal of Heat and Mass Transfer.

[20]  Pan Mei,et al.  A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates , 2019, Applied Thermal Engineering.

[21]  Zhi-jiang Jin,et al.  Hydrogen decompression analysis by multi-stage Tesla valves for hydrogen fuel cell , 2019, International Journal of Hydrogen Energy.

[22]  Zhonghao Rao,et al.  Investigation on thermal management performance of wedge‐shaped microchannels for rectangular Li‐ion batteries , 2019, International Journal of Energy Research.

[23]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[24]  Jie Qu,et al.  Experimental investigation on thermal performance of phase change material coupled with three-dimensional oscillating heat pipe (PCM/3D-OHP) for thermal management application , 2019, International Journal of Heat and Mass Transfer.

[25]  Chengyi Song,et al.  Temperature effect and thermal impact in lithium-ion batteries: A review , 2018, Progress in Natural Science: Materials International.

[26]  Michael Hinterberger,et al.  Battery thermal management system for electric vehicle using heat pipes , 2018, International Journal of Thermal Sciences.

[27]  Zhengguo Zhang,et al.  Compact liquid cooling strategy with phase change materials for Li-ion batteries optimized using response surface methodology , 2018, Applied Energy.

[28]  Nur Irmawati Om,et al.  Influence of the oblique fin arrangement on the fluid flow and thermal performance of liquid cold plate , 2018, Case Studies in Thermal Engineering.

[29]  Jiyun Zhao,et al.  Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery , 2018, Applied Thermal Engineering.

[30]  L. Saw,et al.  Novel thermal management system using mist cooling for lithium-ion battery packs , 2018, Applied Energy.

[31]  M. Carvalho,et al.  The lithium-ion battery: State of the art and future perspectives , 2018, Renewable and Sustainable Energy Reviews.

[32]  Zhi-jiang Jin,et al.  Parametric study on Tesla valve with reverse flow for hydrogen decompression , 2018 .

[33]  D. K. Walters,et al.  Heat transfer and fluid flow characteristics in multistaged Tesla valves , 2018 .

[34]  Massimiliana Carello,et al.  Transient thermal analysis of a lithium-ion battery pack comparing different cooling solutions for automotive applications , 2017 .

[35]  Zhonghao Rao,et al.  Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface , 2017 .

[36]  Chen Lin,et al.  Configuration optimization of battery pack in parallel air-cooled battery thermal management system using an optimization strategy , 2017 .

[37]  Qing Gao,et al.  Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process , 2017 .

[38]  D. Florea,et al.  Design and operation of a Tesla-type valve for pulsating heat pipes , 2017 .

[39]  Yanbao Ma,et al.  Prevent thermal runaway of lithium-ion batteries with minichannel cooling , 2017 .

[40]  Zhonghao Rao,et al.  Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling , 2016 .

[41]  Yanbao Ma,et al.  Thermal management for high power lithium-ion battery by minichannel aluminum tubes , 2016 .

[42]  Jiuchun Jiang,et al.  Comparison of different cooling methods for lithium ion battery cells , 2016 .

[43]  Scott M. Thompson,et al.  Numerical Investigation of Multistaged Tesla Valves , 2014 .

[44]  D. Keith Walters,et al.  Transitional and Turbulent Flow Modeling in a Tesla Valve , 2013 .

[45]  Hyung-Man Cho,et al.  A study on time-dependent low temperature power performance of a lithium-ion battery , 2012 .

[46]  Anthony Jarrett,et al.  Design optimization of electric vehicle battery cooling plates for thermal performance , 2011 .

[47]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[48]  Christopher J. Morris,et al.  Improvements in Fixed-Valve Micropump Performance Through Shape Optimization of Valves , 2005 .

[49]  Xiaosong Hu,et al.  Coestimation of SOC and Three-Dimensional SOT for Lithium-Ion Batteries Based on Distributed Spatial–Temporal Online Correction , 2023, IEEE Transactions on Industrial Electronics.

[50]  S. Roy,et al.  Parametric investigation to optimize the thermal management of pouch type lithium-ion batteries with mini-channel cold plates , 2021 .

[51]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .

[52]  Guoqing Zhang,et al.  A novel strategy to optimize the liquid cooling plates for battery thermal management by precisely tailoring the internal structure of the flow channels , 2022, International Journal of Thermal Sciences.