Influence of talc genesis and particle surface on the crystallization kinetics of polypropylene/talc composites

Talc is a laminar silicate, considered as an excellent nucleating agent for polypropylene (PP) crystallization. However, properties of PP/talc composites depend on the morphology, size, and surface of mineral particles. In this sense, talc from several ores, having different morphology, imparts specific characteristics on these materials. Also, taking into account that PP-talc adhesion is not necessarily good due to the apolar character of PP, talc surface has been modified in order to increase this parameter. In this work, the effects of talc genesis, geomorphologic aspects, and particle surface characteristics on crystallization of PP/talc composites are analyzed. Isothermal crystallization of PP/talc composites was studied by using differential scanning calorimetry, based on Avrami model. The final crystalline morphology of talc-filled PP was analyzed by means optical microscopy. The results show that the blocky talc morphology favors even more the crystallization compared to the platy one, at the same particle size. Taking into account the surface treatment studied in this work, the talc surface is made hydrophobic and the particle delamination is favored. As a consequence, so-modified talc is very effective in increasing the crystallization temperature of PP and the nuclei number that grow during the crystallization with respect to the untreated talc. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

[1]  N. Capiati,et al.  Surface modifications of talcs. Effects of inorganic and organic acid treatments , 2011 .

[2]  C. Albano,et al.  Application of different macrokinetic models to the isothermal crystallization of PP/talc blends , 2003 .

[3]  S. Salvi,et al.  Talc as nucleating agent of polypropylene: morphology induced by lamellar particles addition and interface mineral-matrix modelization , 2002 .

[4]  A. G. Souza,et al.  Nucleating Effect and Dynamic Crystallization of a Poly(propylene)/Talc System , 2001 .

[5]  I. Hudeč,et al.  Influence of filler on the polypropylene structure , 1998 .

[6]  G. Marosi,et al.  Thermoanalytical study of nucleating effects in polypropylene composites , 1996 .

[7]  J. R. White,et al.  Crystal orientation distributions in injection‐molded polypropylene compounds , 1992 .

[8]  M. Fujiyama,et al.  Structures and properties of injection moldings of crystallization nucleator‐added polypropylenes. I. Structure–property relationships , 1991 .

[9]  L. A. Irgen,et al.  Non-isothermal crystallization kinetics of filled blends of polypropylene and low density polyethylene , 1990 .

[10]  J. R. White,et al.  Residual stresses and molecular orientation in particulate-filled polypropylene , 1988 .

[11]  P. Cebe,et al.  Crystallization behaviour of poly(ether-ether-ketone) , 1986 .

[12]  J. Menczel,et al.  Influence of nucleating agents on crystallization of polypropylene , 1983 .

[13]  S. Newman,et al.  Heterogeneous nucleation of crystallization of high polymers from the melt. II. Aspects of transcrystallinity and nucleation density , 1975 .

[14]  M. Avrami.  Kinetics of Phase Change. I General Theory , 1939 .