Numerical evaluation of the effect of air inlet and outlet cross-sections of a lithium-ion battery pack in an air-cooled thermal management system

[1]  Z. Said,et al.  Machinability of ultrasonic vibration-assisted micro-grinding in biological bone using nanolubricant , 2023, Frontiers of Mechanical Engineering.

[2]  Z. Said,et al.  Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant , 2022, Frontiers of Mechanical Engineering.

[3]  Z. Said,et al.  Tribology of enhanced turning using biolubricants: A comparative assessment , 2022, Tribology International.

[4]  Anas M. Abdelrahman,et al.  Cooling of non-sloped, positively sloped, and negatively sloped arrangements of Li-ion batteries with a phase change material connected to a solar system , 2022, Journal of Energy Storage.

[5]  Gangqiang Kong,et al.  Group Performance of Energy Piles under Cyclic and Variable Thermal Loading , 2022, Journal of Geotechnical and Geoenvironmental Engineering.

[6]  Ahmad Hajatzadeh Pordanjani,et al.  Investigation of passive method in thermal management of lithium-ion batteries at different discharge rates by changing the number of cavities containing phase change materials , 2022, Journal of Energy Storage.

[7]  Yongbing Tang,et al.  Unusual Size Effect in Ion and Charge Transport in Micron-sized Particulate Aluminum Anodes of Lithium-ion Batteries. , 2022, Angewandte Chemie.

[8]  Lili Ma,et al.  State of charge estimation of supercapacitors based on multi‐innovation unscented Kalman filter under a wide temperature range , 2022, International Journal of Energy Research.

[9]  Z. Said,et al.  Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids , 2022, Solar Energy Materials and Solar Cells.

[10]  Qi Zhang,et al.  Activated metal-organic frameworks (a-MIL-100 (Fe)) as fillers in polymer electrolyte for high-performance all-solid-state lithium metal batteries , 2022, SSRN Electronic Journal.

[11]  Yanli Tan,et al.  Engineering hierarchical porous S-doped Defective nickel Cobaltite/carbon hybrids to boost efficient asymmetric electrochemical capacitor , 2022, Composites Science and Technology.

[12]  Li Ma,et al.  Hierarchical polygon Co3O4 flakes/N,O-dual doped porous carbon frameworks for flexible hybrid supercapacitors , 2022, Electrochimica Acta.

[13]  Daolian Chen,et al.  Data-driven dynamic harmonic model for modern household appliances , 2022, Applied Energy.

[14]  Yu Yin,et al.  Domain size control in all-polymer solar cells , 2022, iScience.

[15]  Zhen Gong,et al.  Fast Grid Frequency and Voltage Control of Battery Energy Storage System Based on the Amplitude-Phase-Locked-Loop , 2022, IEEE Transactions on Smart Grid.

[16]  Z. Said,et al.  Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: Experimental investigations and model -prediction using modern machine learning techniques , 2022, Powder Technology.

[17]  S. Lorente,et al.  Canopy-to-canopy liquid cooling for the thermal management of lithium-ion batteries, a constructal approach , 2022, International Journal of Heat and Mass Transfer.

[18]  Xiaomin Xu,et al.  Hierarchical multi-objective optimal planning model of active distribution network considering distributed generation and demand-side response , 2022, Sustainable Energy Technologies and Assessments.

[19]  Qi Zhang,et al.  Metal-Organic Frameworks-Based Solid-State Electrolytes for All Solid-State Lithium Metal Batteries: A Review , 2022, CrystEngComm.

[20]  Jiao Wang,et al.  Topology optimization design and numerical analysis on cold plates for lithium-ion battery thermal management , 2022, International Journal of Heat and Mass Transfer.

[21]  J. Monsalve-Serrano,et al.  Thermal runaway evaluation and thermal performance enhancement of a lithium-ion battery coupling cooling system and battery sub-models , 2021, Applied Thermal Engineering.

[22]  Alireza Mahdavi Nejad,et al.  Novel hybrid thermal management for Li-ion batteries with nanofluid cooling in the presence of alternating magnetic field: An experimental study , 2021, Case Studies in Thermal Engineering.

[23]  Raja Mazuir Raja Ahsan Shah,et al.  Modelling of battery thermal management: A new concept of cooling using fuel , 2021, Fuel.

[24]  Sinan Gocmen,et al.  Emergence of elevated battery positioning in air cooled battery packs for temperature uniformity in ultra-fast dis/charging applications , 2021, Journal of Energy Storage.

[25]  Ikou Kaku,et al.  Electric vehicle routing problem: A systematic review and a new comprehensive model with nonlinear energy recharging and consumption , 2021 .

[26]  A. Allouhi,et al.  Thermophysical properties of water, water and ethylene glycol mixture-based nanodiamond+Fe3O4 hybrid nanofluids: An experimental assessment and application of data-driven approaches , 2021, Journal of Molecular Liquids.

[27]  W. Wang,et al.  Effective interlaminar reinforcing and delamination monitoring of carbon fibrous composites using a novel nano-carbon woven grid , 2021 .

[28]  Michael Negnevitsky,et al.  A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles , 2021, Journal of Power Sources.

[29]  G. Cheraghian,et al.  Loading PCM Into Buildings Envelope to Decrease Heat Gain-Performing Transient Thermal Analysis on Nanofluid Filled Solar System , 2021, Frontiers in Energy Research.

[30]  M. Farid,et al.  Development of the inorganic composite phase change materials for passive thermal management of Li-ion batteries: Application , 2021 .

[31]  Yanlai Zhang,et al.  Design of battery thermal management system based on phase change material and heat pipe , 2021 .

[32]  Guoqing Zhang,et al.  Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials , 2021, Applied Thermal Engineering.

[33]  L. Tjeng,et al.  A combinatory ferroelectric compound bridging simple ABO3 and A-site-ordered quadruple perovskite , 2020, Nature Communications.

[34]  Rohit Bhagat,et al.  Air and PCM cooling for battery thermal management considering battery cycle life , 2020, Applied Thermal Engineering.

[35]  Baobao Chang,et al.  Rapid sintering method for highly conductive Li7La3Zr2O12 ceramic electrolyte , 2020, Ceramics International.

[36]  C. Bibin,et al.  A review on thermal issues in Li-ion battery and recent advancements in battery thermal management system , 2020 .

[37]  Fayaz,et al.  Enhancement of heat transfer in paraffin wax PCM using nano graphene composite for industrial helmets , 2019 .

[38]  Hengyun Zhang,et al.  Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling , 2019 .

[39]  A. Garg,et al.  Thermal performance investigation of an air-cooled lithium-ion battery pack considering the inconsistency of battery cells , 2019, Applied Thermal Engineering.

[40]  Akhil Garg,et al.  A surrogate thermal modeling and parametric optimization of battery pack with air cooling for EVs , 2019, Applied Thermal Engineering.

[41]  Bill J. Van Heyst,et al.  A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations , 2018, Journal of Power Sources.

[42]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[43]  Ibrahim Dincer,et al.  Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles , 2017 .

[44]  Rui Zhao,et al.  Optimization of a phase change material based internal cooling system for cylindrical Li-ion battery pack and a hybrid cooling design , 2017 .

[45]  Wen Tong Chong,et al.  Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling , 2016 .

[46]  Yuwen Zhang,et al.  Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam , 2015 .

[47]  Xiongwen Zhang,et al.  Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements , 2015 .

[48]  Hongguang Sun,et al.  Development of cooling strategy for an air cooled lithium-ion battery pack , 2014 .

[49]  Choi Yong-Seok,et al.  Prediction of thermal behaviors of an air-cooled lithium-ion battery system for hybrid electric vehicles , 2014 .

[50]  R. AL-Dadah,et al.  Thermoelectric Cooling Device Integrated with PCM Heat Storage for MS Patients , 2014 .

[51]  Rui Liu,et al.  Numerical and analytical modeling of lithium ion battery thermal behaviors with different cooling designs , 2013 .

[52]  Pascal Henry Biwole,et al.  Phase-change materials to improve solar panel's performance , 2013 .

[53]  Xianguo Li,et al.  Thermal management of lithium‐ion batteries for electric vehicles , 2013 .

[54]  D. Jeon,et al.  Thermal modeling of cylindrical lithium ion battery during discharge cycle , 2011 .

[55]  Said Al-Hallaj,et al.  An alternative cooling system to enhance the safety of Li-ion battery packs , 2009 .

[56]  J. Selman,et al.  Passive control of temperature excursion and uniformity in high-energy Li-ion battery packs at high current and ambient temperature , 2008 .

[57]  Y. Inui,et al.  Simulation of temperature distribution in cylindrical and prismatic lithium ion secondary batteries , 2007 .

[58]  K. Kaygusuz,et al.  Experimental study on melting/solidification characteristics of a paraffin as PCM , 2007 .

[59]  Ahmad Pesaran,et al.  Battery Thermal Management Design Modeling , 2007 .

[60]  Said Al-Hallaj,et al.  Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter , 2004 .

[61]  J. Selman,et al.  Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications , 2002 .

[62]  Roman Domański,et al.  Exergy analysis for the evaluation of a thermal storage system employing PCMS with different melting temperatures , 1996 .

[63]  John Newman,et al.  A General Energy Balance for Battery Systems , 1984 .