Toughening modification of poly(lactic acid)/poly(ε-caprolactone) blends by in-situ compatibilization
暂无分享,去创建一个
Xia Dong | Q. Xing | Yuwen Wang | Haochen Li | Yunrui Long | Rong-bo Li
[1] Bo Wang,et al. Effect of Physical Aging on Heterogeneity of Poly(ε-caprolactone) Toughening Poly(lactic acid) Probed by Nanomechanical Mapping , 2022, Chinese Journal of Polymer Science.
[2] Yunsheng Ding,et al. Polymerized Ionic Liquid for the Regulation of Phase Structure of PLA/PCL Blends , 2022, Macromolecular Research.
[3] G. P.,et al. Effect of cashew shell biomass synthesized cardanol oil green compatibilizer on flexibility, barrier, thermal, and wettability of PLA/PBAT biocomposite films , 2021, Biomass Conversion and Biorefinery.
[4] Ayse Aytac,et al. The effect of different compatibilizers on the properties of prepared poly(lactic acid)/polyurethane nanofibers by electrospinning , 2021, Journal of Industrial Textiles.
[5] Yanshun Xu,et al. Development and properties of bacterial cellulose, curcumin, and chitosan composite biodegradable films for active packaging materials. , 2021, Carbohydrate polymers.
[6] Md. Hafizur Rahman,et al. An overview of non-biodegradable bioplastics , 2021 .
[7] B. Kandasubramanian,et al. Needleless electrospun phytochemicals encapsulated nanofibre based 3-ply biodegradable mask for combating COVID-19 pandemic , 2021, Chemical Engineering Journal.
[8] W. Zhen,et al. Preparation, structure, and performance of poly(lactic acid)/vermiculite‐poly(lactic acid)‐β‐cyclodextrin inclusion complex nanocomposites , 2021 .
[9] Yufeng Zheng,et al. Biodegradable Zn–Sr alloy for bone regeneration in rat femoral condyle defect model: In vitro and in vivo studies , 2020, Bioactive materials.
[10] L. Turng,et al. Improving Polylactide Toughness by Plasticizing with Low Molecular Weight Polylactide-Poly(Butylene Succinate) Copolymer , 2021 .
[11] Soojin Park,et al. Synergistic reinforcing of poly(lactic acid) by poly(butylene adipate‐ co ‐terephthalate) and alumina nanoparticles , 2021, Journal of Applied Polymer Science.
[12] Qian Wang,et al. Selection of antibiotic resistance genes on biodegradable and non-biodegradable microplastics. , 2020, Journal of hazardous materials.
[13] Gopa Kumar,et al. Dual purpose, bio-based polylactic acid (PLA)-polycaprolactone (PCL) blends for coated abrasive and packaging industrial coating applications , 2020, Journal of Polymer Research.
[14] Shaoliang Zhang,et al. Non-biodegradable microplastics in soils: A brief review and challenge. , 2020, Journal of hazardous materials.
[15] Caili Zhang,et al. Enhancing gas barrier performance of polylactic acid/lignin composite films through cooperative effect of compatibilization and nucleation , 2020 .
[16] P. Chumsamrong,et al. Effect of triblock copolymers based on liquid natural rubber and low molecular weight poly(lactic acid) on physical properties of poly(lactic acid)/natural rubber blend , 2020, Polymer Bulletin.
[17] Changyu Shen,et al. Selective dispersion of carbon nanotubes and nanoclay in biodegradable poly(ε-caprolactone)/poly(lactic acid) blends with improved toughness, strength and thermal stability. , 2019, International journal of biological macromolecules.
[18] Xin Wang,et al. Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization , 2019, Composites Part B: Engineering.
[19] M. Šlouf,et al. Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review , 2019, Front. Mater..
[20] M. A. Chinelatto,et al. Effect of Poly(ε-caprolactone-b-tetrahydrofuran) Triblock Copolymer Concentration on Morphological, Thermal and Mechanical Properties of Immiscible PLA/PCL Blends , 2019 .
[21] Jun Luo,et al. Melt Crystallization Behavior and Crystalline Morphology of Polylactide/Poly(ε-caprolactone) Blends Compatibilized by Lactide-Caprolactone Copolymer , 2018, Polymers.
[22] Guanghui Gao,et al. Improvement of compatibility and mechanical properties of the poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends and films by reactive extrusion with chain extender , 2018 .
[23] K. Srikulkit,et al. Preparation and Properties of Poly(lactic Acid)/PLA-g-ABS Blends , 2018, Fibers and Polymers.
[24] S. Ray,et al. A new insight into morphological, thermal, and mechanical properties of melt-processed polylactide/poly(ε-caprolactone) blends , 2018, Polymer Degradation and Stability.
[25] Xiao Liang,et al. Enhanced thermal and mechanical properties of PLA/MoS 2 nanocomposites synthesized via the in-situ ring-opening polymerization , 2018 .
[26] W. Zhen,et al. Preparation, Structure and Performance of Poly(lactic acid)/Poly(lactic acid)-γ-Cyclodextrin Inclusion Complex-Poly(glycidyl methacrylate) Composites , 2018, Macromolecular Research.
[27] E. Murillo,et al. Hyperbranched polyester polyol modified with polylactic acid as a compatibilizer for plasticized tapioca starch/polylactic acid blends , 2018 .
[28] R. Malinowski. Some effects of radiation treatment of biodegradable PCL/PLA blends , 2018 .
[29] M. Šlouf,et al. Strong synergistic effects in PLA/PCL blends: Impact of PLA matrix viscosity. , 2017, Journal of the mechanical behavior of biomedical materials.
[30] P. Fang,et al. Toughening of polylactide via in situ formation of polyurethane crosslinked elastomer during reactive blending , 2017 .
[31] S. Ray,et al. Super toughened biodegradable polylactide blends with non-linear copolymer interfacial architecture obtained via facile in-situ reactive compatibilization , 2015 .
[32] I. Yilgor,et al. Understanding the influence of hydrogen bonding and diisocyanate symmetry on the morphology and properties of segmented polyurethanes and polyureas: Computational and experimental study , 2014 .
[33] P. Ma,et al. Influence of phthalic anhydride and bioxazoline on the mechanical and morphological properties of biodegradable poly(lactic acid)/poly[(butylene adipate)‐co‐terephthalate] blends , 2013 .
[34] Y. Inoue,et al. Polymorphic Transition in Disordered Poly(l-lactide) Crystals Induced by Annealing at Elevated Temperatures , 2008 .
[35] J. Sarasua,et al. Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends , 2006 .
[36] Y. Inoue,et al. Compatibilization effect of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers and phase morphology analysis in immiscible poly(lactide)/poly(epsilon-caprolactone) blends. , 2002, Biomacromolecules.