Power scaling of narrowband high-power all-fiber superfluorescent fiber source to 1.87  kW.

We demonstrate a high-power narrowband all-fiber superfluorescent fiber source employing three-stages master oscillator power-amplifier chain. Narrowband seed light is selected from a broadband-amplified spontaneous-emission source by a spectrum filter combing with fiber circulator and fiber Bragg grating. In the main amplifier, the maximal output power is 1.87 kW with an optical-to-optical conversion efficiency of 77.4% and a full width at half-maximum (FWHM) linewidth of 1.7 nm. The corresponding power fluctuation is ±1.4% in 100 s operation, and no parasitic oscillation or self pulsation is observed. A beam quality of M(2)=1.71 is measured at 1.4 kW output power. This manuscript investigates the spectral evolution in high-power amplification. The central wavelength shifted from 1079.5 nm to 1080.7 nm, and the FWHM linewidth narrowed from 2 nm to 1.7 nm at full power, respectively. These effects could be inferred as hybrid effects of many factors, such as wavelength shifting of pump LD, nonoptimized length of gain fiber, and enhancement of temperature level of gain fiber. The narrowband-maintained characteristic in spectral domain under high-power amplification is significant for applications such as spectral beam combination, and further power scaling is available as the output power is only limited by the pump power.

[1]  A. Fercher,et al.  Optical coherence tomography - principles and applications , 2003 .

[2]  J. Solís,et al.  Broadband spectrally flat and high power density light source for fibre sensing purposes , 2006 .

[3]  Pu Zhou,et al.  Active Phase Locking of Fiber Amplifiers with 180 GHz Ultrabroad Linewidth , 2010 .

[4]  W. Clarkson,et al.  High-Power Broadband Ytterbium-Doped Helical-Core Fiber Superfluorescent Source , 2007, IEEE Photonics Technology Letters.

[5]  Qirong Xiao,et al.  High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration. , 2011, Applied optics.

[6]  H. J. Shaw,et al.  Characteristics of erbium-doped superfluorescent fiber sources for interferometric sensor applications , 1994 .

[7]  L. Goldberg,et al.  High-power superfluorescent source with a side-pumped Yb-doped double-cladding fiber. , 1998, Optics letters.

[8]  T. C. Newell,et al.  Temperature effects on the emission properties of Yb-doped optical fibers , 2007 .

[9]  Vladimir M. Paramonov,et al.  Effect of heating on the optical properties of Yb3+-doped fibres and fibre lasers , 2004 .

[10]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[11]  Tso Yee Fan,et al.  Beam combining of ytterbium fiber amplifiers (Invited) , 2007 .

[12]  A Tünnermann,et al.  High power narrow-band fiber-based ASE source. , 2011, Optics express.

[13]  K. Chow,et al.  Operation-Switchable Bidirectional Pulsed Fiber Laser Incorporating Carbon-Nanotube-Based Saturable Absorber , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[14]  J K Sahu,et al.  Broadband Tm-doped superfluorescent fiber source with 11 W single-ended output power. , 2008, Optics express.

[15]  J K Sahu,et al.  110 W double-ended ytterbium-doped fiber superfluorescent source with M2 = 1.6. , 2006, Optics letters.

[16]  E. M. Dianov,et al.  Superfluorescent 1.44-μm bismuth-doped fiber source , 2012, 2012 17th Opto-Electronics and Communications Conference.

[17]  E. M. Dianov,et al.  Superfluorescent 1.34 μm bismuth-doped fibre source , 2014 .

[18]  M. Zervas,et al.  High Power Fiber Lasers: A Review , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[19]  Jianqiu Cao,et al.  High-power all-fiberized superfluorescent source with distributed side-coupled cladding-pumped fiber. , 2014, Applied optics.

[20]  Deyuan Shen,et al.  High power Er,Yb-doped superfluorescent fiber source with over 16 W output near 1.55 μm. , 2012, Optics express.