Numerical simulations of two-phase flow in an anode gas channel of a proton exchange membrane fuel cell

In this work, the two-phase flow in an anode gas channel of a PEM (proton exchange membrane) fuel cell is numerically investigated using the VOF (volume of fluid) method. Water movement in the gas channel is analyzed and the effects of hydrogen inlet velocity, operating temperature and channel walls wettability are investigated. Results reveal that for hydrophilic channel walls water moves as films in the upper surface of the channel (surface opposite to the GDL (gas diffusion layer)) whereas it moves as a droplet when the channel walls are hydrophobic. Moreover, increasing hydrogen inlet velocity, operating temperature and channel walls wettability results into a faster water removal. However, for the case when hydrogen velocity is increased, a considerable increment on pressure drop is also observed. Results from the present work provide important quantitative information that complements experimental data from literature.

[1]  Joongmyeon Bae,et al.  Visualization of flooding in a single cell and stacks by using a newly-designed transparent PEMFC , 2012 .

[2]  D. Wilkinson,et al.  Three dimensional numerical simulation of gas–liquid two-phase flow patterns in a polymer–electrolyte membrane fuel cells gas flow channel , 2011 .

[3]  S. Souza,et al.  Flow regimes for liquid water transport in a tapered flow channel of proton exchange membrane fuel cells (PEMFCs) , 2013 .

[4]  P. Sui,et al.  Three-dimensional numerical simulations of water droplet dynamics in a PEMFC gas channel , 2008 .

[5]  Biao Zhou,et al.  A general model of proton exchange membrane fuel cell , 2008 .

[6]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[7]  Yulong Ding,et al.  3D simulations of the impact of two-phase flow on PEM fuel cell performance , 2013 .

[8]  TaeJoo Kim,et al.  Research on water discharge characteristics of PEM fuel cells by using neutron imaging technology at the NRF, HANARO. , 2008, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[9]  Qing Du,et al.  Numerical investigation of water dynamics in a novel proton exchange membrane fuel cell flow channel , 2013 .

[10]  Werner Lehnert,et al.  Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography , 2007 .

[11]  Biao Zhou,et al.  Water behavior in serpentine micro-channel for proton exchange membrane fuel cell cathode , 2005 .

[12]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[13]  Jack S. Brenizer,et al.  Study of water distribution and transport in a polymer electrolyte fuel cell using neutron imaging , 2005 .

[14]  J. Brackbill,et al.  A continuum method for modeling surface tension , 1992 .

[15]  C. Hochenauer,et al.  Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels , 2012 .

[16]  Feng-Yuan Zhang,et al.  Liquid Water Removal from a Polymer Electrolyte Fuel Cell , 2006 .

[17]  S. Kandlikar,et al.  Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing , 2011 .

[18]  B. Yi,et al.  Effects of hydrophilic/hydrophobic properties on the water behavior in the micro-channels of a proton exchange membrane fuel cell , 2006 .

[19]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[20]  W. Tao,et al.  Numerical investigation of liquid water distribution in the cathode side of proton exchange membrane fuel cell and its effects on cell performance , 2012 .

[21]  Ned Djilali,et al.  Numerical investigation of water droplet dynamics in a low-temperature fuel cell microchannel: Effect of channel geometry , 2010 .

[22]  Chao-Yang Wang,et al.  Visualization and quantification of cathode channel flooding in PEM fuel cells , 2009 .

[23]  Kirk W Feindel,et al.  In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy. , 2004, Journal of the American Chemical Society.

[24]  Christopher Hebling,et al.  A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding , 2004 .

[25]  Richard I. Masel,et al.  Quantitative MRI study of water distribution during operation of a PEM fuel cell using Teflon® flow fields , 2007 .

[26]  Shanhai Ge,et al.  Liquid Water Formation and Transport in the PEFC Anode , 2007 .

[27]  J. Nouri,et al.  Dynamics of water droplets detached from porous surfaces of relevance to PEM fuel cells. , 2006, Journal of colloid and interface science.

[28]  Qing Du,et al.  Effective removal and transport of water in a PEM fuel cell flow channel having a hydrophilic plate , 2014 .

[29]  D. Wilkinson,et al.  Three-dimensional numerical simulation of water droplet emerging from a gas diffusion layer surface in micro-channels , 2010 .

[30]  Kenneth E. Goodson,et al.  3-D numerical simulation of contact angle hysteresis for microscale two phase flow , 2008 .

[31]  Kentaro Uesugi,et al.  In situ observation of water distribution and behaviour in a polymer electrolyte fuel cell by synchrotron X-ray imaging. , 2008, Journal of synchrotron radiation.

[32]  A. Abudula,et al.  The effect of wall roughness on the liquid removal in micro-channels related to a proton exchange membrane fuel cell(PEMFC) , 2010 .