Oxidative degradation of acid doped polybenzimidazole membranes and fuel cell durability in the presence of ferrous ions

[1]  J. Jensen,et al.  Oxidative Degradation of Polybenzimidazole Membranes as Electrolytes for High Temperature Proton Exchange Membrane Fuel Cells , 2011 .

[2]  D. Plackett,et al.  High-temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells , 2011 .

[3]  P. Cañizares,et al.  Promising TiOSO₄ composite polybenzimidazole-based membranes for high temperature PEMFCs. , 2011, ChemSusChem.

[4]  P. Cañizares,et al.  Enhancement of the fuel cell performance of a high temperature proton exchange membrane fuel cell running with titanium composite polybenzimidazole-based membranes , 2011 .

[5]  T. Jana,et al.  Polybenzimidazole gel membrane for the use in fuel cell , 2011 .

[6]  Hui Li,et al.  Durability of PEM fuel cell cathode in the presence of Fe3+ and Al3+ , 2010 .

[7]  R. He,et al.  Preparation and characterization of polybenzimidazole membranes prepared by gelation in phosphoric acid , 2010 .

[8]  D. Wan,et al.  Effects of adjacent groups of benzimidazole on antioxidation of polybenzimidazoles , 2010 .

[9]  T. Lim,et al.  Synthesis and characterization of acid-doped polybenzimidazole membranes by sol–gel and post-membrane casting method , 2010 .

[10]  Jens Oluf Jensen,et al.  Properties, degradation and high temperature fuel cell test of different types of PBI and PBI blend membranes , 2010 .

[11]  Brian C. Benicewicz,et al.  Synthesis and Properties of Functionalized Polybenzimidazoles for High-Temperature PEMFCs , 2009 .

[12]  Benjamin D. Gould,et al.  Comparison of the Sulfur Poisoning of PBI and Nafion PEMFC Cathodes , 2009 .

[13]  D. Wan,et al.  Chemical oxidative degradation of Polybenzimidazole in simulated environment of fuel cells , 2009 .

[14]  Robert F. Savinell,et al.  High temperature proton exchange membranes based on polybenzimidazoles for fuel cells , 2009 .

[15]  Brian C. Benicewicz,et al.  Durability Studies of PBI‐based High Temperature PEMFCs , 2008 .

[16]  Qingfeng Li,et al.  Partially Fluorinated Arylene Polyethers and Their Ternary Blend Membranes with PBI and H3PO4. Part I. Synthesis and Characterisation of Polymers and Binary Blend Membranes , 2008 .

[17]  Jürgen Mergel,et al.  Durability of ABPBI‐based MEAs for High Temperature PEMFCs at Different Operating Conditions , 2008 .

[18]  Thomas J. Schmidt,et al.  Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode , 2008 .

[19]  Pablo Cañizares,et al.  Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC , 2007 .

[20]  Qingfeng Li,et al.  Doping phosphoric acid in polybenzimidazole membranes for high temperature proton exchange membrane fuel cells , 2007 .

[21]  Jesper Schramm,et al.  High temperature PEMFC and the possible utilization of the excess heat for fuel processing , 2007 .

[22]  Qingfeng Li,et al.  Cross-Linked Polybenzimidazole Membranes for Fuel Cells , 2007 .

[23]  T. Schmidt,et al.  Durability and Reliability in High-Temperature Reformed Hydrogen PEFCs , 2006 .

[24]  P. Cañizares,et al.  Synthesis and characterisation of poly[2,2-(m-phenylene)-5,5-bibenzimidazole] as polymer electrolyte membrane for high temperature PEMFCs , 2006 .

[25]  Minoru Inaba,et al.  Durability of perfluorinated ionomer membrane against hydrogen peroxide , 2006 .

[26]  Ronghuan He,et al.  Integration of high temperature PEM fuel cells with a methanol reformer , 2005 .

[27]  Brian C. Benicewicz,et al.  Synthesis and Characterization of Pyridine‐Based Polybenzimidazoles for High Temperature Polymer Electrolyte Membrane Fuel Cell Applications , 2005 .

[28]  M. Inaba,et al.  Effect of Agglomeration of Pt/C Catalyst on Hydrogen Peroxide Formation , 2004 .

[29]  Evan O. Jones,et al.  Power generation using a mesoscale fuel cell integrated with a microscale fuel processor , 2004 .

[30]  Qingfeng Li,et al.  Water uptake and acid doping of polybenzimidazoles as electrolyte membranes for fuel cells , 2004 .

[31]  Qingfeng Li,et al.  Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 °C , 2003 .

[32]  Ronghuan He,et al.  The CO Poisoning Effect in PEMFCs Operational at Temperatures up to 200°C , 2003 .

[33]  M. De Francesco,et al.  Nafion degradation in PEFCs from end plate iron contamination , 2003 .

[34]  E. Roduner,et al.  EPR investigation of HO/ radical initiated degradation reactions of sulfonated aromatics as model compounds for fuel cell proton conducting membranes , 1999 .

[35]  H. Wang,et al.  Behavior of Raipore Radiation‐Grafted Polymer Membranes in H 2 / O 2 Fuel Cells , 1998 .

[36]  R. Savinell,et al.  Thermal Stability of Proton Conducting Acid Doped Polybenzimidazole in Simulated Fuel Cell Environments , 1996 .

[37]  Jesse S. Wainright,et al.  A H2O2 fuel cell using acid doped polybenzimidazole as polymer electrolyte , 1996 .

[38]  Jesse S. Wainright,et al.  Acid-doped polybenzimidazoles : a new polymer electrolyte , 1995 .

[39]  F. E. Karasz,et al.  Fourier transform infra-red spectroscopy on the thermo-oxidative degradation of polybenzimidazole and of a polybenzimidazole/polyetherimide blend , 1993 .

[40]  G. Scherer.  Polymer Membranes for Fuel Cells , 1990 .

[41]  H. Mark,et al.  Encyclopedia of polymer science and engineering , 1985 .

[42]  R. Gaudiana,et al.  Weak‐link versus active carbon degradation routes in the oxidation of aromatic heterocyclic systems , 1969 .