Partial discharge and aging phenomena in insulation systems of rotating machines fed by power electronics

This paper deals with partial discharge measurements carried out on specimens of Type I and Type II insulation systems for rotating machines. Partial discharge (PD) patterns under sinusoidal and repetitive impulse voltage, considering two level and five level inverters, are presented showing that phenomenology is deeply different, but that increasing the number of inverter steps, PD patterns closer to those obtained under sinusoidal supply voltages can be obtained. The different characteristics, magnitude and repetition rate of PD varying the voltage supply waveshape have significant impact on life and insulation system reliability, for both Type I and Type II insulation.

[1]  M. Kaufhold,et al.  Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse controlled inverters , 1995, Proceedings of 1995 Conference on Electrical Insulation and Dielectric Phenomena.

[2]  Andrea Cavallini,et al.  The influence of repetitive square wave voltage parameters on enameled wire endurance , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  Gian Carlo Montanari,et al.  Influence of PWM-type voltage waveforms on reliability of machine insulation system , 1998, 8th International Conference on Harmonics and Quality of Power. Proceedings (Cat. No.98EX227).

[4]  G. Borner,et al.  Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controll , 1996 .

[5]  D. Fabiani,et al.  A novel method to diagnose PWM-fed induction motors , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[6]  J.C.G. Wheeler,et al.  Effects of converter pulses on the electrical insulation in low and medium voltage motors , 2005, IEEE Electrical Insulation Magazine.

[7]  A. Cavallini,et al.  Effect of rise time on PD pulse features under repetitive square wave voltages , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[8]  Alfredo Contin,et al.  Advanced PD inference in on-field measurements. I. Noise rejection , 2003 .

[9]  Gian Carlo Montanari.  Power electronics and electrical apparatus: a threat? , 2007 .

[10]  A. H. Bonnett,et al.  A comparison between insulation systems available for PWM inverter fed motors , 1996, Proceedings of 1996 IAS Petroleum and Chemical Industry Technical Conference.

[11]  Gian Carlo Montanari.  Time behavior of partial discharges and life of type II turn insulation specimens under repetitive impulse and sinusoidal waveforms , 2017, IEEE Electrical Insulation Magazine.

[12]  Gian Carlo Montanari,et al.  Partial Discharge and life behavior of rotating machine wire insulation under PWM waveforms: The influence of inverter characteristics , 2017, 2017 IEEE Electrical Insulation Conference (EIC).

[13]  Alfredo Contin,et al.  Advanced PD inference in on-field measurements. II. Identification of defects in solid insulation systems , 2003 .