A fundamental principle and systematic procedures for process intensification in reactive distillation columns

A fundamental principle is developed for process intensification through internal mass and energy integration in reactive distillation columns and three systematic procedures are devised for process synthesis and design. For reactive distillation columns involving reactions with highly thermal effect, process intensification can be achieved with an exclusive consideration of internal energy integration between the reaction operation and separation operation involved. However, in the case of a highly endothermic reaction with an extremely low reaction rate and/or small chemical equilibrium constant, internal mass integration has also to be considered between the reactive section and stripping section. For reactive distillation columns involving reactions with negligibly or no thermal effect, process intensification can be performed with an exclusive consideration of internal mass integration. For reactive distillation columns involving reactions with moderately thermal effect, process intensification must be conducted with a careful trade-off between internal mass and energy integration. Five hypothetical and two real reactive distillation systems are employed to evaluate the principle and procedures proposed. It is demonstrated that intensifying internal mass and energy integration is really effective for process intensification. Not only can the thermodynamic efficiency be improved substantially, but also the capital investment can be further reduced.

[1]  Bodo Linnhoff,et al.  Distillation column targets , 1993 .

[2]  W. Luyben.  Distillation Design and Control Using Aspen Simulation , 2006 .

[3]  A. Stankiewicz.  Reactive separations for process intensification: an industrial perspective , 2003 .

[4]  Kejin Huang,et al.  Deepening Internal Mass Integration in Design of Reactive Distillation Columns, 1: Principle and Procedure , 2009 .

[5]  J. de Graauw,et al.  Internal heat integration – the key to an energy‐conserving distillation column , 2003 .

[6]  Atsushi Tsutsumi,et al.  Reactive distillation design with considerations of heats of reaction , 2006 .

[7]  and Kejin Huang,et al.  Design and Control of a Methyl Tertiary Butyl Ether (MTBE) Decomposition Reactive Distillation Column , 2007 .

[8]  William L. Luyben,et al.  Design and control of an olefin metathesis reactive distillation column , 2002 .

[9]  Michael F. Malone,et al.  Simulation of kinetic effects in reactive distillation , 2000 .

[10]  K. Sundmacher,et al.  Reactive distillation : status and future directions , 2003 .

[11]  Ka Ming Ng,et al.  Synthesis of crystallization–distillation hybrid separation processes , 1997 .

[12]  San-Jang Wang,et al.  Towards further internal heat integration in design of reactive distillation columns—Part III: Application to a MTBE reactive distillation column , 2008 .

[13]  Richard S.H. Mah,et al.  Improving distillation column design using thermodynamic availability analysis , 1980 .

[14]  Amy R. Ciric,et al.  Synthesis of nonequilibrium reactive distillation processes by MINLP optimization , 1994 .

[15]  Efstratios N. Pistikopoulos,et al.  Modular synthesis framework for combined separation/reaction systems , 2001 .

[16]  Michael F. Doherty,et al.  Design method for kinetically controlled, staged reactive distillation columns , 1998 .

[17]  Miguel J. Bagajewicz,et al.  Mass/heat‐exchange network representation of distillation networks , 1992 .

[18]  San-Jang Wang,et al.  Understanding the Impact of Operating Pressure on Process Intensification in Reactive Distillation Columns , 2010 .

[19]  Keigo Matsuda,et al.  Consider heat integration to improve separation performance : Innovative approaches gain efficiency for distillation operations , 2008 .

[20]  N. Kaistha,et al.  Internal Heat Integration and Controllability of Double Feed Reactive Distillation Columns, 1. Effect of Feed Tray Location , 2008 .

[21]  Z. Fonyo,et al.  THERMODYNAMIC ANALYSIS OF RECTIFICATION - 1. REVERSIBLE MODEL OF RECTIFICATION. , 1974 .

[22]  Qunxiong Zhu,et al.  Towards further internal heat integration in design of reactive distillation columns-Part IV: Application to a high-purity ethylene glycol reactive distillation column , 2009 .

[23]  A. Tsutsumi,et al.  Towards further internal heat integration in design of reactive distillation columns—part I: The design principle , 2005 .

[24]  Cheng-Ching Yu,et al.  Design of reactive distillations for acetic acid esterification , 2005 .

[25]  William L. Luyben,et al.  Economic and Dynamic Impact of the Use of Excess Reactant in Reactive Distillation Systems , 2000 .

[26]  Johan Grievink,et al.  Designing reactive distillation processes: present and future , 2004, Comput. Chem. Eng..

[27]  Ravi Kumar,et al.  Novel Adsorption Distillation Hybrid Scheme for Propane/Propylene Separation , 1992 .

[28]  Domingos Barbosa,et al.  Optimization of reactive distillation processes with simulated annealing , 2000 .

[29]  A. I. Stankiewicz,et al.  Process Intensification: Transforming Chemical Engineering , 2000 .

[30]  Gerhart Eigenberger,et al.  Autothermal fixed-bed reactor concepts , 2000 .

[31]  Michael F. Doherty,et al.  Reactive distillation by design , 1992 .

[32]  Qunxiong Zhu,et al.  Seeking synergistic effect- : A key principle in process intensification , 2007 .

[33]  Masaru Nakaiwa,et al.  Internally Heat-Integrated Distillation Columns: A Review , 2003 .

[34]  N. Kaistha,et al.  Internal Heat Integration and Controllability of Double Feed Reactive Distillation Columns, 2. Effect of Catalyst Redistribution , 2008 .