On time measurement of the efficiency of a waste-to-energy plant and evaluation of the associated uncertainty

An automatic system for calculating the lower heating value (LHV) of waste was implemented and analysed for an existing waste-to-energy plant. The calorific value was determined by the indirect method using the whole combustion chamber and heat recovery steam generator as the calorimeter. On the basis of this fundamental information it was also possible to evaluate on time the gross and net efficiency of the plant. The main results indicated that the LHV varied daily, from 4,000 to 13,000 kJ/kg, even if the average monthly values ranged from about 7,300 to 10,000 kJ/kg. The uncertainty associated with these values was ±0.82% with a confidence interval of 95%. The corresponding gross and net efficiencies were about 18% and 8%, respectively, with an associated uncertainty < 1.4%. The LHVs of waste were in good agreement with those measured by a calorimetric bomb, even if they had a higher uncertainty level of about 5.6%.

[1]  Caterina Micale,et al.  What is the acceptable margin of error for the oxygen uptake method in evaluating the reactivity of organic waste? , 2014, Waste management.

[2]  Petr Stehlík,et al.  Contribution to advances in waste-to-energy technologies. , 2009 .

[3]  Kitipat Siemanond,et al.  Predicting the heating value of sewage sludges in Thailand from proximate and ultimate analyses , 2005 .

[4]  Francesco Di Maria,et al.  RDF to energy plant for a central Italian region SUW management system: Energetic and economical analysis , 2006 .

[5]  W. T. Tsai,et al.  An overview of renewable energy utilization from municipal solid waste (MSW) incineration in Taiwan , 2006 .

[6]  Petr Stehlík,et al.  Waste-to-energy technologies: Impact on environment , 2012 .

[7]  Alberto Poggio,et al.  Simulation of the influence of flue gas cleaning system on the energetic efficiency of a waste-to-energy plant , 2009 .

[8]  A. K. Majumder,et al.  Development of a New Proximate Analysis Based Correlation to Predict Calorific Value of Coal , 2008 .

[9]  Roberto Turconi,et al.  Life cycle assessment of waste incineration in Denmark and Italy using two LCA models , 2011, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[10]  S. Channiwala,et al.  A correlation for calculating HHV from proximate analysis of solid fuels , 2005 .

[11]  Lucia Rigamonti,et al.  Efficiency of energy recovery from waste incineration, in the light of the new Waste Framework Directive. , 2010, Waste management.

[12]  Hefa Cheng,et al.  Municipal solid waste (MSW) as a renewable source of energy: current and future practices in China. , 2010, Bioresource technology.

[13]  Marie Münster,et al.  Comparing Waste-to-Energy technologies by applying energy system analysis. , 2010, Waste management.

[14]  Caterina Micale,et al.  Improvement of the management of residual waste in areas without thermal treatment facilities: A life cycle analysis of an Italian management district. , 2015, Waste management.

[15]  Ni-Bin Chang,et al.  Environmental performance evaluation of large-scale municipal solid waste incinerators using data envelopment analysis. , 2010, Waste management.