Tribodynamic studies of textured gearsets lubricated with fresh and MoS2 blended greases

[1]  A. Rosenkranz,et al.  Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review , 2021, Tribology International.

[2]  B. Alfredsson,et al.  The influence of gear surface roughness on rolling contact fatigue under thermal elastohydrodynamic lubrication with slip , 2020 .

[3]  A. Rosenkranz,et al.  Non-Dimensional Groups, Film Thickness Equations and Correction Factors for Elastohydrodynamic Lubrication: A Review , 2020, Lubricants.

[4]  N. Jain,et al.  Laser texturing of helical and straight bevel gears to enhance finishing performance of AFF process , 2020, The International Journal of Advanced Manufacturing Technology.

[5]  N. Tandon,et al.  Tribological and Vibration Studies of Textured Spur Gear Pairs under Fully Flooded and Starved Lubrication Conditions , 2020 .

[6]  Huaiju Liu,et al.  Effects of lubrication on gear performance: A review , 2020 .

[7]  Vivek Bhardwaj,et al.  Performance studies of textured race ball bearing , 2019, Industrial Lubrication and Tribology.

[8]  M. Khonsari,et al.  Experimental investigation of the chemical degradation of lubricating grease from an energy point of view , 2019, Tribology International.

[9]  Sandro Wartzack,et al.  Designing surface textures for EHL point-contacts - Transient 3D simulations, meta-modeling and experimental validation , 2019, Tribology International.

[10]  David A. Strubbe,et al.  Solid Lubrication with MoS2: A Review , 2019, Lubricants.

[11]  A. Rosenkranz,et al.  Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts , 2019, Advanced Engineering Materials.

[12]  N. Jain,et al.  Study of laser texturing assisted abrasive flow finishing for enhancing surface quality and microgeometry of spur gears , 2019 .

[13]  N. Tandon,et al.  An exploration of the performance behaviors of lubricated textured and conventional spur gearsets , 2018, Tribology International.

[14]  Sandro Wartzack,et al.  Microtextured surfaces in higher loaded rolling-sliding EHL line-contacts , 2018, Tribology International.

[15]  T. Tobie,et al.  The Effect of Selected Operating Parameters, Material Pairing, and Gear Size on the Wear Behavior of Grease Lubricated, Small Module Gears , 2017 .

[16]  R. Pandey,et al.  Experimental investigations for tribo-dynamic behaviours of conventional and textured races ball bearings using fresh and MoS2 blended greases , 2017 .

[17]  M. Khonsari,et al.  Mechanical degradation of lubricating grease in an EHL line contact , 2017 .

[18]  S. M. Hsu,et al.  A critical assessment of surface texturing for friction and wear improvement , 2017 .

[19]  N. Tandon,et al.  Vibration studies of lubricated textured point contacts of bearing steels due to surface topographies: Simulations and experiments , 2016 .

[20]  N. Tandon,et al.  Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated With Oil and Grease Under Starved Conditions , 2016 .

[21]  Huaiju Liu,et al.  Tribological evaluation of a coated spur gear pair , 2016 .

[22]  Abdul Wasy Zia,et al.  Tribological performance of few layer graphene on textured M2 steel surfaces , 2016 .

[23]  M. Remškar,et al.  Tribological performance of TiN, TiAlN and CrN hard coatings lubricated by MoS2 nanotubes in Polyalphaolefin oil , 2016 .

[24]  Michael M. Khonsari,et al.  On the prediction of steady-state wear rate in spur gears , 2015 .

[25]  N. Tandon,et al.  Performance of Lubricated Rolling/Sliding Concentrated Contacts With Surface Textures: A Review , 2015 .

[26]  D. W. Wang,et al.  Experimental and numerical studies of friction-induced vibration and noise and the effects of groove-textured surfaces , 2014 .

[27]  Karsten Stahl,et al.  The Slow-Speed Wear Behavior of Case-Carburized Gears Lubricated with NLGI 00 Grease under Boundary Lubrication Conditions , 2014 .

[28]  Si-Geun Choi,et al.  Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface , 2013 .

[29]  M. Kalin,et al.  Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS2 nanotubes in all lubrication regimes , 2013 .

[30]  Jun Zhao,et al.  Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys , 2012 .

[31]  R. P. Glovnea,et al.  Electrical Methods for the Evaluation of Lubrication in Elastohydrodynamic Contacts , 2012 .

[32]  Mitjan Kalin,et al.  Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives , 2012 .

[33]  Robert F. Handschuh,et al.  Gear Mesh Loss-of-Lubrication Experiments and Analytical Simulation , 2011 .

[34]  I. Etsion,et al.  Wear life and adhesion of solid lubricant films on laser-textured steel surfaces , 2009 .

[35]  Izhak Etsion,et al.  Friction and wear of MoS2 films on laser textured steel surfaces , 2008 .

[36]  A. A. Voevodin,et al.  Laser surface texturing for adaptive solid lubrication , 2006 .

[37]  F. Sadeghi,et al.  The Effects of a Stationary Surface Pocket on EHL Line Contact Start-Up , 2004 .

[38]  A. Olver,et al.  Gear lubrication—a review , 2002 .

[39]  Henry Peredur Evans,et al.  Surface Fatigue Lives of Case-Carburized Gears With an Improved Surface Finish , 2001 .

[40]  W. Bartz.  Solid lubricant additives—effect of concentration and other additives on anti-wear performance☆ , 1971 .

[41]  A. Cameron,et al.  The Measurement of Oil-Film Thickness in Gear Teeth , 1960 .

[42]  T B Lane,et al.  A study of the oil-film formation in gears by electrical resistance measurements , 1952 .

[43]  W. Bragg.  An Introduction to Crystal Analysis , 1928, Nature.

[44]  M. Charoo,et al.  Effect of Additives on the Tribological Properties of Various Greases-A Review , 2019, Materials Today: Proceedings.

[45]  Tong Xiaomeng,et al.  ロータ力学同期不安定に及ぼす両側オーバーハング円板とパラメータ効果 -Morton効果- 第1部:理論とモデリング手法 , 2017 .

[46]  Karsten Stahl,et al.  The Effect of Selected Grease Components on the Wear Behavior of Grease-Lubricated Gears , 2016 .

[47]  Xiangsheng Xia,et al.  Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts , 2016 .

[48]  J.-P. Stemplinger,et al.  Influences on failure modes and load carrying capacity of grease lubricated gears , 2015 .

[49]  S. K. Biswas,et al.  Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases , 2013, Tribology Letters.

[50]  Mike Johnson,et al.  Lubricant application : Grease volumes and frequencies , 2009 .

[51]  Robert F. Handschuh,et al.  Wear of Spur Gears Having a Dithering Motion and Lubricated With a Perfluorinated Polyether Grease , 2007 .

[52]  Henry Peredur Evans,et al.  Effect of Surface Finish on Gear Tooth Friction , 2000 .

[53]  N. Samman,et al.  Grease-based open gear lubricants: multi-service products: Development and evaluation , 1998 .

[54]  K. Fukunaga.  Allowable Surface Durability in Grease Lubricated Gears , 1988 .